• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.53-61
• /
• 2014

In this paper, we present the design, fabrication and measurement of high efficiency GaN HEMT power amplifier using harmonic matching technique. In order to achieve high efficiency, harmonic load-pull simulation is performed, that is, the optimum load impedances are determined at $2^{nd}$ and $3^{rd}$ harmonic frequencies as well as at the fundamental. Then, the output matching circuit is designed based on harmonic load-pull simulation. The measurement of the fabricated power amplifier shows the linear gain of 20 dB and $P_{1dB}$(1 dB gain compression point) of 33.7 dBm at 1.85 GHz. The maximum power added efficiency(PAE) of 80.9 % is achieved at the output power of 38.6 dBm, which belongs to best efficiency performance among the reported high efficiency power amplifiers. For W-CDMA input signal, the power amplifier shows a PAE of 27.8 % at the average output power of 28.4 dBm, where an ACLR (Adjacent Channel Leakage Ratio) is measured to be -38.8 dBc. Digital predistortion using polynomial fitting was implemented to linearize the power amplifiers, which allowed about 6.2 dB improvement of an ACLR performance.

• Korean Journal of Social Welfare
• /
• v.56 no.4
• /
• pp.5-34
• /
• 2004

This study aims to find out the determinants of burnout in order to better understand the burnout process among social workers. For this purpose, a hypothetical model which explains the relationships among 8 job-related stressors (role ambiguity, role overload, difficulties in solving problems of clients, conflict with the clients, lack of support from the supervisor, closed communication pattern, bureaucracy, and lack of accountability), 4 mediators (job-stress, professional role performance, abiding by the agency policy and partiality in service delivery), and 4 dimensions of burnout (physical exhaustion, psychological exhaustion, depersonalization and personal accomplishment) was developed. Using the data collected from 207 social workers, the hypothetical model was tested. For data analysis, a path analysis was used, and the best-fitting model was found(df=66, $x^2$=63.250, GFI=0.962, CFI=1.00). As a result of this study, the following results were found. Burnout among social workers was increased by the 6 job-related stressors(role ambiguity, role overload, difficulties in solving problems of clients, conflict with the clients, lack of support from the supervisor, closed communication pattern). Job-stress, the mediating variable of the emotional path to burnout, increased professional role performance and the abiding by agency policy, and finally increased burnout. On the other hand, professional self-efficacy (which consists of professional role performance, abiding by agency policy and partiality in service delivery), the mediationg variable of the cognitive path to burnout, reduced burnout when the professional role performance was high, and abiding by agency policy and partiality in service delivery were low.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.109-113
• /
• 2007

This paper introduces a system, Simulation based Stochastic Markup Estimation System (S2ME), for estimating optimum markup for a project. The system was designed and implemented to better represent the real world system involved in construction bidding. The findings obtained from the analysis of existing assumptions used in the previous quantitative markup estimation methods were incorporated to improve the accuracy and predictability of the S2ME. The existing methods has four categories of assumption as follows; (1) The number of competitors and who is the competitors are known, (2) A typical competitor, who is fictitious, is assumed for easy computation, (3) the ratio of bid price against cost estimate (B/C) is assumed to follow normal distribution, (4) The deterministic output obtained from the probabilistic equation of existing models is assumed to be acceptable. However, these assumptions compromise the accuracy of prediction. In practice, the bidding patterns of the bidders are randomized in competitive bidding. To complement the lack of accuracy contributed by these assumptions, bidding project was randomly selected from the pool of bidding database in the simulation experiment. The probability to win the bid in the competitive bidding was computed using the profile of the competitors appeared in the selected bidding project record. The expected profit and probability to win the bid was calculated by selecting a bidding record randomly in an iteration of the simulation experiment under the assumption that the bidding pattern retained in historical bidding DB manifest revival. The existing computation, which is handled by means of deterministic procedure, were converted into stochastic model using simulation modeling and analysis technique as follows; (1) estimating the probability distribution functions of competitors' B/C which were obtained from historical bidding DB, (2) analyzing the sensitivity against the increment of markup using normal distribution and actual probability distribution estimated by distribution fitting, (3) estimating the maximum expected profit and optimum markup range. In the case study, the best fitted probability distribution function was estimated using the historical bidding DB retaining the competitors' bidding behavior so that the reliability was improved by estimating the output obtained from simulation experiment.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.234-238
• /
• 2012

A tumor on the eyelid is often treated using a high-energy electron beam, with a metallic eye shield inserted between the eyelid and the eyeball to preserve the patient's sight. Pretreatment quality assurance of the inner eyelid dose on the metallic shield requires a very small dosimetry tool. For enhanced accuracy, a flexible device fitting the curved interface between the eyelid and the shield is also required. The radiochromic film is the best candidate for this device. To measure the doses along the curved interface and small area, a 3-mm-wide strip of EBT2 film was inserted between the phantom eyelid and the shield. After irradiation with 6 MeV electron beams, the film was evaluated for the dose profile. An acrylic eye shield of the same size as the real eye shield was machined, and CT images free from metal artifacts were obtained. Monte Carlo simulation was performed on the CT images, taking into account eye shield material, such as tungsten, aluminum, and steel. The film-based interface dose distribution agreed with the MC calculation within 2.1%. In the small (millimeter scale) and curved region, radiochromic film dosimetry promises a satisfactory result with easy handling.

• Investigative Magnetic Resonance Imaging
• /
• v.2 no.1
• /
• pp.67-72
• /
• 1998

The mapping of the spin-spin relaxation time T2 in pixel-by-pixel was suggested as a quantitative diagnostic tool in medicine. although the CPMG pulse sequence has been known to be the best pulse sequence for T2 measurement in physics NMR, the supplied pulse sequence by the manufacture of MRI system was able to obtain the maximum of 4 CPMG images. Eight or more images with different echo time TEs are required to construct a reliable T2 map, so that two or more acquisitions were required, which easily took more than 10 minutes. 4-echo CPMG imaging pulse sequence was modified to generate the maximum of 8 MR images with evenly spaced echo time TEs. In human MR imaging, since patients tend to move at least several pixels between the different acquisitions, 8-echo CPMG imaging sequence reduces the acquisition time and may remove any mis-regitration of each pixels signal for the fitting of T2. The resultant T2 maps using the theoretically simulated images and using the MR images of the human brain suggested that 8 echo CPMG sequence with short echo spacing such as 17-20 msec can give the reliable T2 map.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.3
• /
• pp.262-268
• /
• 2013

The performances of speech compression schemes appeared to be dependent on the response profiles to compressed stimuli and the features of individual languages to some extent. Although these response profiles were critical in comparing various compression outcomes, the related data were limited in number for Korean monosyllabic words. From the previous study, data from PNT (Preserving No Trait) compression was selected as a base set for comparison. In this study, the outcomes from PPT (Preserving Pitch Trait) and PTT (Preserving Time Trait) were analyzed under the same condition. Then, the properties of these three widely used representative compression schemes were quantitatively compared in normal hearing adults (N=20) for controlled Korean quintet digit sets (0 through 9). Results showed that PPT compression scheme exhibited the best perceptual performances for the Korean quintet digit sets in the final outcomes (PPT>PTT>PNT). The compression ratios of 50% performances were estimated as about 20%, 42%, and 44% for PPT, PTT, and PNT, respectively. The data indicated the influences of the salient psychoacoustic features of the three representative compressions on perceiving Korean monosyllabic digit words. This controlled procedure with monosyllabic quintet sets can evaluate efficiency and effectiveness of other compression schemes and may also contribute to diagnosing auditory processing disorders and fitting special hearing aids with compression issues.

• Water for future
• /
• v.14 no.4
• /
• pp.35-52
• /
• 1981

This study is to evaluate the areal precipitation from the basic data groups of monthly, seasonal, and annual rainfalls over all ma in stations in Korea. The evaluating pocesses are performed through the point and regional frequency analysis from the basic data. The basic data groups are divided into two periods-the first(1916-1944) and the second (1960-1979)-which are compared with each other. In the point frequecny analysis, the variable transformation method is applied to the best fitting distribution, and the normal fittings are established by using the Chisquare test method. In the regional frequency analysis, the geomorphologic factors and hydrometeorological factors are taken into consideration when dividing into five zones and Thiessen method and the Isohyetal method are applied. The results of this study are as follows: 1)The areal precipitation values of the first period are about 70-80mm less than that of the second period for the whole of Korea. Therefore, a new precipitation value of 1180mm is considered more suitable than the value of 1159mm, which has been up till now. 2)As the annual areal precipitiation values areevaluated over the five divide zones, it tis noticed that the difference between the values of the first period and the second is the largest in spring (to the extent of 5 times that in the other seasonas). Thereform it is considered that this result is necessary for the establishment of a timely insurance plan for the water resources. 3)The application of the Isohyetal method through the division of Korea into five zones is considered to be a reasonable procedure in the analysis of areal precipitation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.699-710
• /
• 2009

If a country has her geoid model, it could be determine accurate orthometric height because the geoid model could provide continuous equi-gravity potential surface. And it is possible to improve the coordinates accuracy of national control points through geodetic network adjustment considering geoidal heights. This study aims to find the best way to develop geoid model in Philippines which have similar topographic conditions as like Malaysia and Indonesia in Eastsouth asia. So, in this study, it is surveyed the general theories of geoid determination and development cases of geoid model in Asia and it is computed that the geoidal heights and gravity anomalies by spherical harmonic analysis using EGM2008, the latest earth geopotential model. The results show that first, the development of gravimetric geoid model based on airborne gravimetry is needed and second, about 200 GPS surveying data at national benchmark is needed. It is concluded that it is the most reasonable way to develop the hybrid geoid model through fitting geometric geoid by GPS/leveling data to gravimetric geoid. Also, it is proposed that four band spherical Fast fourier transformation(FFT) method for evaluation of Stokes integration and remove and restore technique using EGM2008 and SRTM for calculation of gravimetric geoid model and least square collocation algorithm for calculation of hybrid geoid model.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.217-228
• /
• 2014

The purpose of this study is to grasp inconveniences and improvements by examining wearing condition and satisfaction of protective clothing targeting 114 Korean farmers and to suggest basic data for enhancement of pattern and wearing satisfaction of protective clothing by understanding problems of pesticide-proof clothing through comparative analysis on the size of its commercial products. Most of male subjects were in charge of spraying pesticide, whereas female were most likely to play an assistant role to hold the hose of pesticide applicator. Both of female and male subjects were very aware of the harmful effect of pesticide on human body and tried to take off the clothes immediately after spraying it to reduce possible damage caused by pesticide. As a result of examining wearing condition, the farmers avoided wearing protective clothing because that it feels hot, stuffy, and uncomfortable to move. This hesitant response of wearing the clothing was not shown significantly in case of female subjects who play an assistant role for spraying. Although the farmers wore protective equipments such as mask or gloves in a proper way as compared to protective clothing, they seemed to choose alternative way rather than best way to block pesticide completely. The satisfaction regarding to the fitting of protective clothing which the subjects showed low in all items of upper-lower clothes except waistline. It is necessary to improve the functionality such as relief from heat stress and convenience for movement rather than design or economic in protective clothing development. As a result of comparing the size of five kinds of commercial protective clothing, the farmers got confused to choose the product since designation method of size across companies showed a significant difference in an identical clothing size. In addition, the sizing system developed on a basis of a well-built man has become a hindering factor in wearing satisfaction of female farmers.

• Journal of Korean Society on Water Environment
• /
• v.29 no.6
• /
• pp.832-841
• /
• 2013

In recent years, eutrophication in the Paldang Lake has become one of the major environmental problems in Korea as it may threaten drinking water safety and human health. Thus it is important to understand the phenomena and predict the time and magnitude of algal blooms for applying adequate algal reduction measures. This study performed seasonal water quality assessment and chlorophyll-a prediction using Bayseian simple/multiple linear regression analysis. Bayseian regression analysis could be a useful tool to overcome limitations of conventional regression analysis. Also it can consider uncertainty in prediction by using posterior distribution. Generally, chlorophyll-a of a P2(Paldang Dam 2) site showed high concentration in spring and it was similar to that of P4(Paldang Dam 4) site. For the development of Bayseian model, we performed seasonal correlation. As a result, chlorophyll-a of a P2 site had a high correlation with P5(Paldang Dam 5) site in spring (r = 0.786, p<0.05) and with P4 in winter (r = 0.843, p<0.05). Based on the DIC (Deviance Information Criterion) value, critical explanatory variables of the best fitting Bayesian linear regression model were selected as a $PO_4-P$ (P2), Chlorophyll-a (P5) in spring, $NH_3-N$ (P2), Chlorophyll-a (P4), $NH_3-N$ (P4) in summer, DTP (P2), outflow (P2), TP (P3), TP (P4) fall, COD (P2), Chl-a (P4) and COD (P4) in winter. The results of chlorophyll-a prediction showed relatively high $R^2$ and low RMSE values in summer and winter.