• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.6
• /
• pp.869-875
• /
• 2011

Ministry of Environment has been promoting BTL business of the sewer rehabilitation which continues from 2005 up to now. Sewer rehabilitation is classified into three parts : wastewater pipe rehabilitation, rainwater pipe rehabilitation and drainage equipment rehabilitation. Drainage equipment rehabilitation is that drainage pipe connects wastewater pipe directly without water-purifier. In the drainage equipment construction, it is inevitable to have the damage of ground structures(wall, gate and U drain, etc) when an open excavation method is used. Therefore it is necessary to develop non-excavation method to connect drainage pipe and wastewater pipe like jacking method to avoid the damage of ground structure. This paper has conducted an analysis of the non-excavation method using a boring machine attached to backhoe, which is issued the verification certificate of environmental technology according to the Development of and Support for Environmental Technology Act, article.7. The index set in this analysis was sectionalized to the condition of construction, the grade of drainage pipe, the size of excavated hole, the amount of waste cement concrete and asphalt concrete and the benefit effect compared to open excavation method.

• Journal of the Korean Society of Visualization
• /
• v.16 no.2
• /
• pp.16-22
• /
• 2018

This study investigates dynamic wetting behaviors of a water droplet placed on surfaces with different wettability and nano-structures. Hydrophobic and hydrophilic properties on as-received silicon wafers were prepared by fabricating thin films of hydrophobic polymer and hydrophilic nanoparticles via layer-by-layer coating. Dynamic advancing contact angle of droplets on the prepared surfaces was measured at various moving velocities of triple contact line with a high-speed video camera. As advancing velocity of triple contact line increased, dynamic advancing contact angle on the as-received silicon and hydrophobic surfaces sharply increased up to $80^{\circ}$ in the range of order of mm/sec whereas the SiO2 nanoparticle-coated hydrophilic surface maintained low contact angles of about $30^{\circ}$ and then it gradually increased in the velocity range of order of hundred mm/sec. The improved dynamic wetting ability observed on the nanostructured hydrophilic surface can benefit the performance of various phase-change heat transfer phenomena under forced convective flow.

• Neonatal Medicine
• /
• v.16 no.2
• /
• pp.110-120
• /
• 2009

Mimicking fetal nutrition is the goal of early paretneral nutrition (PN) in very low birth weight infants, however the limited metabolic capacity of immature organs raises concern about the toxicity of metabolites to the developing brain. Starting parenteral amino acids from the first day of life, with a rate of 1.0 to 1.5 g/kg/day, is generally recommended to prevent endogenous protein breakdown by maintaining a positive nitrogen balance. A greater of amino acid infusion rate in the range of the fetal transfer rate (3.5-4.0 g/kg/day) is well tolerated during the early days after birth in VLBWI, however the influence on growth and long-term neurodevelopmental outcome remains unknown. Limited data are available from controlled trials regarding the effects of early supplementation with lipid emulsions on neonatal morbidity. Considering the role of long-chain polyunsaturated fatty acids in the neurodevelopment, the choice of an optimal lipid emulsion should be based on the quality as well as the quantity of the lipid contents. Little is known about the clinical benefit of higher rates of glucose infusion by permitting high serum glucose level or co-administration with insulin.

• Proceedings of the KSEEG Conference
• /
• 2005.04a
• /
• pp.148-151
• /
• 2005

Field-scale DNAPL dissolution is controlled by the topology of DNAPL distributions with respect to the velocity field. A high resolution percolation model was developed and employed to simulate the distribution of DNAPL within source zones. Statistically anisotropic permeability values and capillary parameters were generated for 10${\times}$10${\times}$10 m domains at a resolution of 0.05 to 0.1 m for various statistical properties. TCE leakage was simulated at various rates and the distribution of residual DNAPL in 'fingers' and 'lenses' was computed. Variations in finger and lens geometries, frequencies, average DNAPL saturations, and overall source topology were predicted to be strongly influenced by statistical properties of the medium as well as by injection rate and fluid properties. Model results were found to be consistent with observations from controlled DNAPL release experiments reported in the literature. The computed distributions of aquifer properties and DNAPL were utilized to perform high-resolution numerical simulations of groundwater flow and dissolved transport. Simulations were performed to assess the effect of grout or foam injection in bore holes within the source zone and of shallow point-releases of fluids with various properties on dissolution in DNAPL dissolution rate, even for widely spaced injection points. The results indicate that measures that induced partial flow reductions through DNAPL source zones can significantly decrease dissolution rates from residual DNAPL. The benefit from induced partial flow reductions is two-fold: 1) local flow reduction in DNAPL contaminated zones reduces mass transfer rates, and 2) contaminant flux reductions occur due to the decrease in groundwater velocity

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.429-435
• /
• 2010

Although recently revised building code requires 15~20% increased thermal insulation performance for window systems, since the code is focusing on winter heat loss, it is not satisfactory to contribute on reducing rapidly rising cooling load in summer. Window systems have great impact on building heat gain and loss. Therefore technological development for window system specialized in shading solar gain in summer is an urgent matter. This study evaluates the performance of sun shading and thermal insulation for blind integrated window system. Also, computer simulation evaluates the effect of heating and cooling energy consumption reduction for an individual unit(floor area of $85m^2$) of a multi-family housing. Physibel Voltra, a heat transfer analysis software, was used to analyse the effect of energy consumption reduction, and the energy load was converted to the cost to compare the actual effect of economical benefit.

• Journal of the Korean Institute of Rural Architecture
• /
• v.7 no.3
• /
• pp.1-8
• /
• 2005

Decrease in Population and graying of rural area by industrialization and urbanization are gone continuously. This makes happened various rural problems and the differential of standard of living with is arising day by day. Government is unfolding rural supporting project to solve continuously these problems. Recent Projects which are choosing not top-down process by government leading but bottom-up process through village inhabitants' participation and expert consultant get positive estimation. But those have difficulties because the support is attained only in the beginning step not continuously and inhabitants' number by graying is decreasing. The Special Economic Zone for Regional Development Policy is new access that regulation can differ according to special quality of each area depending on Localization Age. Through this transfer the competence that can mitigate or reinforce various regulations according to special quality of area in local government. So, back and maintain activation systematically so that each area could be developed specially. The purpose of The Special Economic Zone for Regional Development Policy is the activation of regional economy through development that regional specific character is. And there is characteristic that local government plans and takes the lead in all project contents, government gives regulation benefit by appointing the special economic zone and do not support finance and various tax remissions. Through investigation of such new policy, I wish to recognize what long-term plan and method could be possible to success rural activation continuously.

• The Journal of Information Technology
• /
• v.8 no.3
• /
• pp.159-176
• /
• 2005

The Purpose of this Article is to analyze the special settlement and electronic settlement system in the international trade. First, Factoring is a fast, easy and flexible way to improve a company's cash flow and generate working capital for the company. Factoring can be short-term or part of an ongoing financing program. New companies can benefit as well, since there is no requirement for a long-term credit history. Second, Forfaiting is a method of trade financing that allows exporters to obtain cash and be free of all risks by selling their medium term receivables on a 'without recourse' basis. Forfaiting can be an alternative to export credit or insurance cover, especially for those transactions in which the export credit agency is not open to a particular country and/or bank. Third, The Bolero System is jointly financed by SWIFT(Society for World International Financial Telecommunications) which handles most of the electronic funds transfer for banks, and the Through Transport Mutual Assurance Association(the TT Club), a mutual insurance association most of whose members are drawn from the Multimodal transport industry or transport intermediaries. Fourth, TradeCard is a payment and settlement system that is an alternative to letters of crdeit. That is, TradeCard is a business-to-business e-commerce infrastructure that enables buyers and sellers to conduct and settle international trade transactions securely over the Internet.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.3
• /
• pp.205-217
• /
• 2017

This paper tries to show the efficiency of water financing between central and local governments. From the year of 2017, the operation and maintenance costs for change water pipes has been provided by central government as block grants system(RDSA: Regional Development Special Account). Even though the water financing is responsible for local government, water drought and high production cost in poor area affects the quality of life nowadays. Then, fiscal transfer through block grant for water financing has been decided to invest regional SOC. The purpose of the paper sheds light on the function of the block grant for public provision by water financing. The firstly tried empirical results are based on the survey from local governments and ministry of environments. The point of the empirical analysis shows that the local governments does not have proper measurement for unexpected water leakage and termination until now. In a policy manner, the paper raises the issues about benefit principle for water users by the increase of tariffs. In order to do so, the paper investigates the relationship between the water provision and fiscal status of each local governments.

• Composites Research
• /
• v.34 no.2
• /
• pp.123-128
• /
• 2021

This paper dealt with multi-scale natural frequency characteristics of wavy CNT (carbon nanotube) reinforced composites by applying the Mori-Tanaka method, rule of mixture, and Halpin-Tsai equation. By compelling benefit of an ad-hoc Eshelby tensor, the load-transfer characteristics of CNT with a waviness implanted in the polymer matrix was determined. The numerical results obtained are in good agreement with those reported by other investigators. Furthermore, the new results reported in this paper show the interactions between CNT weight, waviness ratios and layup sequences of laminated composites. Key observation points are discussed and significant considerations are given in practical designing of CNT reinforced composites.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.173-183
• /
• 2009

Knowledge management (KM) is one of the useful management tools in today's project management (PM) practice, such as construction projects. Nobody can deny the importance of "useful knowledge" always helps organizations and project managers shaping a decision. Due to the trend of globalization, it is now very common that an organization may comprise employees from different countries of distinct national-cultures working together. It is also not uncommon that different projects, within an organization, may have their own organizational-cultures which influence its knowledge repository, transfer process and knowledge strategy. Therefore, it is extremely difficult to align all these cultures and consolidate them to benefit the KM process and PM practice. Organizations and project managers understand that different national-cultural and organizational-cultural factors will create impact on the philosophy of KM process which will subsequently affect PM practice. Those factors may affect interpersonal relations and exchange of knowledge between projects and amongst staff. Systematic KM process can utilize the goodness of different employees from distinct cultures which can eventually drive the organization and projects to success. The purpose of this paper, based upon a case study of a Hong Kong construction company, is to discuss how those cultural factors are linked to KM and what organization and project managers can do to improve the KM process and PM practice.