• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.109-116
• /
• 2007

The present study examined mechanical properties according to the change of outer circumference in the friction welding of A2024-T4 stock, which is used much as aircraft structure, truck wheel, stainless materials and A2024-T4 stock with 10 hollow at the center. Welding conditions were fixed at RPM 2,000rpm, friction pressure of 50MPa, friction time of 1.5sec, upset pressure of 120MPa and upset time of 2.0 seconds. From the result of this study were drawn conclusions as follows : According to the result of a tensile strength test, the solid shaft showed linear increase of tensile strength with the change of outer circumference, the hollow shaft showed maximum tensile stength when the length (L) was 2mm and decrease of tensile strength with the change of outer circumference, hardness appeared to increase and then decrease for welding interface, and it showed maximum hardness 155Hv at L=5mm of the solid shaft. Bending strength increased linearly far change of the distance (L) of outer circumference in the solid shaft and then decreased linearly in the hollow shaft. the result of examining tissue, the tissue grew finer around the welding interface and divided the basic material and the welding surface.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.618-618
• /
• 2013

Graphene is only one atom thick planar sheet of sp2-bonded carbon atoms arranged in a honeycomb crystal lattice, which has flexible and transparent characteristics with extremely high mobility. These noteworthy properties of graphene have given various applicable opportunities as electrode and/or channel for various flexible devices via suitable physical and chemical modifications. In this work, for the development of all-graphene devices, we performed to synthesize alternately patterned structure of mono- and multi-layer graphene by using the patterned Ni film on Cu foil, having much different carbon solid solubilities. Depending on the process temperature, Ni film thickness, introducing occasion of methane and gas ratio of CH4/H2, the thickness and width of the multi-layer graphene were considerably changed, while the formation of monolayer graphene on just Cu foil was not seriously influenced. Based on the alternately patterned structure of mono- and multi-layer graphene as a channel and electrode, respectively, the flexible TFT (thin film transistor) on SiO2/Si substrate was fabricated by simple transfer and O2 plasma etching process, and the I-V characteristics were measured. As comparing the change of resistance for bending radius and the stability for a various number of repeated bending, we could confirm that multi-layer graphene electrode is better than Au/Ti electrode for flexible applications.

• Structural Engineering and Mechanics
• /
• 제6권5호
• /
• pp.497-516
• /
• 1998

A relatively simple two-dimensional multilayered shell model is presented for predicting both global quantities and stress distributions across the thickness of multilayered thick shells, that is based on a third-order zig-zag approach. As for any zig-zag model, the layerwise kinematics is accounted for, with the stress continuity conditions at interfaces met a priori. Moreover, the shell model satisfies the zero transverse shear stress conditions at the upper and lower free surfaces of the shell, irrespective of the lay-up. By changing the parameters in the displacement model, some higher order shell models are obtained as particular cases. Although it potentially has a wide range of validity, application is limited to cylindrical shell panels in cylindrical bending, a lot of solutions of two-dimensional models based on rather different simplyfying assumptions and the exact three-dimensional elasticity solution being available for comparisons for this benchmark problem. The numerical investigation performed by the present shell model and by the shell models derived from it illustrates the effects of transverse shear modeling and the range of applicability of the simplyfying assumptions introduced. The implications of retaining only selected terms depending on the radius-to-thickness ratio are focused by comparing the present solutions to the exact one and to other two-dimensional solutions in literature based on rather different simplyfying assumptions.

• International Journal of Concrete Structures and Materials
• /
• 제8권3호
• /
• pp.239-249
• /
• 2014

In this paper, the analysis of a numerical study of pile-soil interaction subjected to axial and lateral loads is presented. An analysis of the composite pile-soil system was performed using the finite difference (FD) software LPILE. Two three dimensional, finite element (FE) models of pile-soil interaction have been developed using Abaqus/Cae and SAP2000 to study the effect of lateral loading on pile embedded in clay. A lateral displacement of 2 cm was applied to the top of the pile, which is embedded into the concrete pile cap, while maintaining a zero slope in a guided fixation. A comparison between the bending moments and lateral displacements along the depth of the pile obtained from the FD solutions and FE was performed. A parametric study was conducted to study the effect of crucial design parameters such as the soil's modulus of elasticity, radius of the soil surrounding the pile in Abaqus/Cae, and the number of springs in SAP2000. A close correlation is found between the results obtained by the FE models and the FD solution. The results indicated that increasing the amount of clay surrounding the piles reduces the induced bending moments and lateral displacements in the piles and hence increases its capacity to resist lateral loading.

• Composites Research
• /
• 제13권5호
• /
• pp.18-30
• /
• 2000

일축방향 섬유강화 복합재료 C링의 최적설계를 위하여, 이의 점 하중 하에서의 점탄성적 하중완화거동을 해석하였다. 이를 위하여 곡선보의 굽힘 이론을 이용하여 탄성학적 처짐과 굽힘 강성의 해석을 수행한 후 상당원리(correspondence theorem)를 이용하여 점탄성학적 하중완화 거동을 해석하였다. 일축방향 섬유강화 복합재료의 직교이방성 뿐만 아니라 복합재료의 인장강성과 압축강성의 차이에서 기인하는 비대칭물성도 함께 고려하였다. 그 결과 C링의 단면의 두께가 반지름에 비해 충분히 작은 보라면 보이론만으로도 정확하게 곡선보를 해석할 수 있고 하중완화 이론값 또한 실험값과 잘 일치하고 있음을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.239-246
• /
• 2003

This paper proposes engineering estimation equations of elastic-plastic J and COD fur axial through-wall cracked pipes under internal pressure. Based on detailed 3-D FE results based on deformation plasticity, the plastic influence functions for fully plastic J and COD solutions are tabulated as a function of the mean radius-to-thickness ratio, the normalized crack length. and the strain hardening. Based on these results, the GE/EPRI-type J and COD estimation equations are proposed and validated against the 3-D FE results based on deformation plasticity. For more general application to general stress-strain laws or to complex loading, the developed GE/EPRI-type solutions are re-formulated based on the reference stress concept. Such a reformulation provides simpler equations for J and COD, which are then further extended to combined internal pressure and bending. The proposed reference stress based J and COD estimation equations are compared with elastic-plastic 3-D FE results using actual stress-strain data for Type 316 stainless steels. The FE results for both internal pressure cases and combined internal pressure and bending cases compare very well with the proposed J and COD estimations.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.870-875
• /
• 1986

본 연구에서는 랙의 이끝부분을 full-rounded tip으로 설계한 후, 이에 의하 여 창성되는 피니언의 이뿌리곡선을 구하여 전체치형을 완성하였다. 그리고 합성치 형기어의 미끄름율, 유효이뿌리원에서의 공칭굽힘응력과 두쌍접촉호의 길이대 원호부 분접촉호의 길이의 비인 접촉계수를 해석적인 방법으로 구하였다.또한 이들 특성들 과 물림율등 제특성을 비교.검토하여 공구압력각, 인벌류우트부분의 크기를 나타내는 물림각 및 원호반경등의 변화에 대한 제특성의 변화를 고려한 합성치형의 성능을 향상 시킬 수 있는 설계방법을 구하였으며, 합성치형과 표준인버류우트치형을 비교하였다.

• 소성∙가공
• /
• 제8권5호
• /
• pp.507-519
• /
• 1999

An approach using the energy method has veen proposed for the analysis of cone spinning having the complicated deformation modes mixed by shear and normal deformation. In the proposed method, the corresponding solution is found through optimization of the total energy dissipation with respect to the parameters assumed by the velocity field defined as the variation of the length in longitudinal direction. The sheet blank is divided into three layers to consider the bending effect and the energy dissipated by shear deformation is superposed to the energy consumption due to normal deformation related with the shrinking deformation is superposed to the energy consumption due to normal deformation related with the shrinking deformation of axi-symmetric sheet element for the evaluation of total deformation energy. In order to check the validity of the proposed method, the complex spinning for making the conical cup is analyzed and the computed results are compared with the experimental results. In comparison of the computed results with existing experimental results,, the good agreement is obtained for the variation of outer radius and the distribution of thickness, and it has thus been shown that the present approach is applicable to the analysis of complex spinning.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.285-287
• /
• 2014

Equations of motion for the vibration analysis of rotating pre-twisted beams with functionally graded material properties are derived in this paper. Based on Timoshenko beam theory, the effects of shear and rotary inertia are considered. The pre-twisted beam has a rectangular cross-section and is mounted on a rotating rigid hub with a setting angle. Functionally graded material (FGM) properties are considered along the height direction of the beam. The equations of stretching and bending motion are derived by Kane's method employing hybrid deformation variables. To validate the derived equations, natural frequencies of a rotating FGM pre-twisted beam are compared to those obtained by a commercial software ANSYS. The effects of the pre-twisted angle, slenderness ratio, hub radius, volume fraction exponent, and angular speed on the modal characteristics of the system are investigated with the proposed model.

• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.120-124
• /
• 2016

In this study, we fabricate transparent and bendable a-IGZO (amorphous indium gallium zinc oxide) TFTs (thin-film transistors) with a-IZO (amorphous indium zinc oxide) transparent electrodes on plastic substrates and investigate their electrical characteristics under bending states. Our a-IGZO TFTs show a high transmittance of 82% at a wavelength of 550 nm. And these TFTs have an $I_{on}/I_{off}$ ratio of $1.8{\times}10^8$, a field effect mobility of $15.4cm^2/V{\cdot}s$, and a subthreshold swing of 186 mV/dec. The good electrical characteristics are retained even after bending with a curvature radius of 18 mm corresponding to a strain of 0.5% owing to mechanical durability of the transparent electrodes used in this study.