• 한국측량학회지
• /
• 제35권5호
• /
• pp.405-414
• /
• 2017

Spatial data processing often poses challenges due to the unique characteristics of spatial data and this becomes more complex in spatial big data processing. Some tools have been developed and provided to users; however, they are not common for a regular user. This paper presents a benchmark test between two notable tools of spatial big data processing: GIS Tools for Hadoop and SpatialHadoop. At the same time, a MapReduce application is introduced to be used as a baseline to evaluate the effectiveness of two tools and to derive the impact of number of maps/reduces on the performance. By using these tools and New York taxi trajectory data, we perform a spatial data processing related to filtering the drop-off locations within Manhattan area. Thereby, the performance of these tools is observed with respect to increasing of data size and changing number of worker nodes. The results of this study are as follows 1) GIS Tools for Hadoop automatically creates a Quadtree index in each spatial processing. Therefore, the performance is improved significantly. However, users should be familiar with Java to handle this tool conveniently. 2) SpatialHadoop does not automatically create a spatial index for the data. As a result, its performance is much lower than GIS Tool for Hadoop on a same spatial processing. However, SpatialHadoop achieved the best result in terms of performing a range query. 3) The performance of our MapReduce application has increased four times after changing the number of reduces from 1 to 12.

• 융합신호처리학회논문지
• /
• 제15권2호
• /
• pp.55-63
• /
• 2014

본 논문에서는 대전상관기의 상관결과를 고속으로 저장하기 위한 데이터아카이브 시스템의 성능시험에 대해 기술한다. 대전상관기는 다양한 관측모드를 지원하고 있는데, 이 관측모드 중에서 적분시간에 따라 상관기로부터 출력되는 상관결과의 속도에 영향을 받는다. 대전상관기의 상관결과를 가장 빠른 속도로 출력하는 것은 최대 1.4GB/s를 출력하며, C1 관측모드일 경우 25.6ms의 상관적분인 경우이다. 본 연구에서는 대전상관기의 핵심부분인 VLBI상관서브시스템(VLBI Correlation Subsystem)과 4개의 광케이블로 연결되어 상관결과를 저장하는 데이터아카이브 시스템의 성능시험을 수행하였다. 데이터아카이브 시스템은 본 연구를 위해 2개 회사의 제품을 선정하여 벤치마크테스트(Benchmark Test)를 진행하였다. 본 논문에서는 벤치마크테스트를 위해 개발한 VCS의 상관출력 파일 생성 프로그램과 시험결과에 대해 기술한다.

• 터널과지하공간
• /
• 제17권1호
• /
• pp.32-42
• /
• 2007

암반구조물의 파괴는 초기응력의 크기, 무결암의 강도 그리고 단층이나 절리와 같이 암반 내에 존재하는 불연속면의 상태에 의해 좌우된다. 일반적으로 고심도에 건설되는 암반구조물의 경우 높은 현지응력과 공동 굴착에 따른 유도응력으로 인해 공동 경계면에서 스폴링이나 슬래빙과 같은 취성파괴가 발생할 수 있다. 최근 고심도에 건설되는 암반구조물이 증가함에 따라 취성파괴의 발생사례가 증가하고 있으며, 더욱이 국내의 저심도 구간에서도 스폴링 현상이 보고되어 취성파괴에 대한 연구의 필요성이 요구되고 있다. 그러나 아직까지 취성파괴에 대해 명확하게 규명되지 않아 본 보고에서 취성파괴현상을 규명하기 위해 수행되었던 기존 연구결과를 중심으로 취성파괴와 그 특징에 대하여 요약정리하였다.

• ETRI Journal
• /
• 제23권3호
• /
• pp.138-149
• /
• 2001

Due to the rapidly growing complexity of VLSI circuits, test methodologies based on delay testing become popular. However, most approaches cannot handle custom logic blocks which are described by logic functions rather than by circuit primitive elements. To overcome this problem, a new path delay test generation algorithm is developed for custom designs. The results using benchmark circuits and real designs prove the efficiency of the new algorithm. The new test generation algorithm can be applied to designs employing intellectual property (IP) circuits whose implementation details are either unknown or unavailable.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.807-810
• /
• 1998

This paper presents BIST (Built-in self-test) techniques for detection of path delay faults in digital circuits. In the proosed BIST schemes, the shift registers make possible to concurrently generate and compact the latched test data. Therefore the test time is reduced efficiently. By reordering the elements of th shifte register based on the information of the hamming distance of each memory elements in CUt, it is possible to increase the number of path delay faults detected robustly/non-robustly. Experimental results for ISCAS'89 benchmark circuits show the efficiency of the proposed BIST techniques.

• Smart Structures and Systems
• /
• 제17권3호
• /
• pp.445-470
• /
• 2016

In this study, the Bayesian probabilistic framework is investigated for modal identification and modal identifiability based on the field measurements provided in the structural health monitoring benchmark problem of an instrumented cable-stayed bridge named Ting Kau Bridge (TKB). The comprehensive structural health monitoring system on the cable-stayed TKB has been operated for more than ten years and it is recognized as one of the best test-beds with readily available field measurements. The benchmark problem of the cable-stayed bridge is established to stimulate investigations on modal identifiability and the present paper addresses this benchmark problem from the Bayesian prospective. In contrast to deterministic approaches, an appealing feature of the Bayesian approach is that not only the optimal values of the modal parameters can be obtained but also the associated estimation uncertainty can be quantified in the form of probability distribution. The uncertainty quantification provides necessary information to evaluate the reliability of parametric identification results as well as modal identifiability. Herein, the Bayesian spectral density approach is conducted for output-only modal identification and the Bayesian model class selection approach is used to evaluate the significance of different modes in modal identification. Detailed analysis on the modal identification and modal identifiability based on the measurements of the bridge will be presented. Moreover, the advantages and potentials of Bayesian probabilistic framework on structural health monitoring will be discussed.

• 한국정보처리학회논문지
• /
• 제3권5호
• /
• pp.1215-1228
• /
• 1996

벤치마크는 컴퓨터 시스템의 성능을 측정하기 위한 프로그램이며, 컴퓨터 시스템 의 성능은 사용자가 실행하는 응용 프로그램의 실행되는 속도에 의해서 결정 된다. 따라서, 컴퓨터 시스템의 성능을 정확히 측정하기 위한 벤치마크 프로그램은 사용자가 실행시키는 응용 프로그램과 동일한 동작 특성을 가져야 한다. 본 연구에 서는, Chaustone, Mchaustone, Fhsstone으로 이루어진 벤치마크 프로그램인 CMFstone을 구현 한다. CNFstone을 구현·실행한 결과, 다른 여러 벤치마크를 실행한 결과의 평균과 유사한 측정 결과를 보였다. 따라서, 컴퓨터 시스템의 성능 측정을 위해서 여러 벤치 마크를 실행할 필요 없이, CMFstpme을 실행시키는 것만으로도 다양한 성능 측정이 가능하다.

• Structural Engineering and Mechanics
• /
• 제77권3호
• /
• pp.417-439
• /
• 2021

The geometric nonlinearity has been successfully integrated with the design of steel structural system. Thus, the tubular lattice girder, one application of steel structural systems have already been optimized to obtain an economic design following the completion of computationally expensive design procedure. In order to decrease its computing cost, this study proposes to employ five multi-objective metaheuristics for the design optimization of geometrically nonlinear tubular lattice girder. Then, the employed multi-objective optimization algorithms (MOAs), NSGAII, PESAII, SPEAII, AbYSS and MoCell are evaluated considering their computing performances. For an unbiased evaluation of their computing performance, a tubular lattice girder with varying size-shape-topology and a benchmark truss design with 17 members are not only optimized considering the geometrically nonlinear behavior, but three benchmark mathematical functions along with the four benchmark linear design problems are also included for the comparison purpose. The proposed experimental study is carried out by use of an intelligent optimization tool named JMetal v5.10. According to the quantitative results of employed quality indicators with respect to a statistical analysis test, MoCell is resulted with an achievement of showing better computing performance compared to other four MOAs. Consequently, MoCell is suggested as an optimization tool for the design of geometrically nonlinear tubular lattice girder than the other employed MOAs.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2151-2161
• /
• 2021

Nuclear data (ND) sensitivity and uncertainty (S/U) quantification in shielding applications is performed using deterministic and probabilistic approaches. In this paper the validation of the newly developed deterministic program package ASUSD (ADVANTG + SUSD3D) is presented. ASUSD was developed with the aim of automating the process of ND S/U while retaining the computational efficiency of the deterministic approach to ND S/U analysis. The paper includes a detailed description of each of the programs contained within ASUSD, the computational workflow and validation results. ASUSD was validated on two shielding benchmark experiments from the Shielding Integral Benchmark Archive and Database (SINBAD) - the fission relevant ASPIS Iron 88 experiment and the fusion relevant Frascati Neutron Generator (FNG) Helium Cooled Pebble Bed (HCPB) Test Blanket Module (TBM) mock-up experiment. The validation process was performed in two stages. Firstly, the Denovo discrete ordinates transport solver was validated as a standalone solver. Secondly, the ASUSD program package as a whole was validated as a ND S/U analysis tool. Both stages of the validation process yielded excellent results, with a maximum difference of 17% in final uncertainties due to ND between ASUSD and the stochastic ND S/U approach. Based on these results, ASUSD has proven to be a user friendly and computationally efficient tool for deterministic ND S/U analysis of shielding geometries.

• 한국기계가공학회지
• /
• 제19권8호
• /
• pp.28-34
• /
• 2020

In this study, hole-boss locking washers were developed to prevent vibrational loosening, and a benchmark test was conducted to compare these washers with existing wedge locking washers, which are imported and high-priced. The developed washers consist of an upper washer with bosses and a lower washer with holes, and the bosses are caught in the holes so that the bolt is not loosened. Additionally, the top side of the upper washer and the underside of the lower washer have small wedges perpendicular to the direction of the bolt loosening, suppressing slips. A test by the Korea Test Laboratory indicated that the ratio of the loosening torque to the joining torque is greater than 70%, confirming that the developed washers have a sufficiently high anti-loosening performance. A Junker test apparatus was manufactured for the testing of vibrational loosening and a test comparison between the proposed washers and the existing wedge locking washers shows that the proposed washers have a slower reduction in the clamping force and a higher loosening-resistance in a vibrational circumstance compared with the wedge locking washers. These results indicate that the developed washers demonstrate a high performance and boast price competitiveness.