• Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.157-175
• /
• 2007

The membrane biofilm reactor (MBfR) creates a natural partnership of a membrane and biofilm, because a gas-transfer membrane delivers a gaseous substrate to the biofilm that grows on the membrane's outer wall. $O_2$-based MBfRs (called membrane aerated biofilm reactors, or MABRs) have existed for much longer than $H_2$-based MBfRs, but the $O_2$-based MBfR is a versatile platform for reducing oxidized contaminants in many water-treatment settings: drinking water, ground water, wastewater, and agricultural drainage. Extensive bench-scale experimentation has proven that the $H_2$-based MBfR can reduce many oxidized contaminant to harmless or easily removed forms: e.g., ${NO_3}^-$ to $N_2$, ${ClO_4}^-$ to $H_2O$ and $Cl^-$, ${SeO_4}^{2-}$ to $Se^0$, and trichloroethene (TCE) to ethene and $Cl^-$. The MBfR has been tested at the pilot scale for ${NO_3}^-$ and ${ClO_4}^-$ and is now entering field-testing for many of the oxidized contaminants alone or in mixtures. For the MBfR to attain its full promise, several issues must be addressed by bench and field research: understanding interactions with mixtures of oxidized contaminants, treating waters with a high TDS concentration, developing modules that can be used in situ to augment pre-denitrification of wastewater, and keeping the capital costs low.

• Journal of Korea Water Resources Association
• /
• v.34 no.6
• /
• pp.725-733
• /
• 2001

In this study, variation of effluent of residual chlorine concentration was estimated from bench scale distribution reservoir test according to variation of flow and baffle condition. According to the bench scale test results, when the flow rate was an unsteady state, difference between the case of no-baffle in the reservoir and the case of two-baffles in the reservoir became less than the condition when the effluent flow was in a steady state. Consequently, the results are caused by the flow rate variation. Thus, the baffle is less effective than a clearwell of steady state condition.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1373-1383
• /
• 2001

The desulfurization characteristics of anthracite in a bench scale pressurized fluidized bed combustor are investigated. The coal used in the experiment is domestic anthracite from Kangwon Taeback area. The desulphurization experiment is performed with limestone from Chungbuk Danyang. The pressure of the combustor is maintained at 6 atm, and the combustion temperatures are 850, 900, and 950$\^{C}$. The superficial gas velocities are 0.9, 1.1, and 1.3 m/s. The excess air ratio is varied from 5 to 35%. The Ca/S mole ratios are 0.5, 1.5, 2.5 and 4.5 mole. All experiments are executed at 2m bed height. Consequently, SO$_2$ concentration in the flue gas is increased with incresing bed temperature and superficial gas velocity. However SO$_2$ concentration is decreased with incresing excess air ratio and Ca/S mole ratio.

• Membrane Journal
• /
• v.12 no.3
• /
• pp.151-157
• /
• 2002

This research was to demonstrate the Possibility of sewage reuse for industrial purpose with use of membrane system. A bench scale test with microfiltration and reverse osmosis showed that microfiltration in the sewage treatment was not able to remove the soluble salts but 70% suspended solids (SS), suggesting that the treated water could be used as direct cooling water. In addition, the reverse osmosis removed not only soluble salts but also 95% SS, proposing that reverse osmosis-treated water could be used as both indirect cooling water and rinsing water. For a 100 ton/day pilot plant, 20 and 12 elements of microfiltration and reverse osmosis were required, respectively.

• Resources Recycling
• /
• v.12 no.2
• /
• pp.36-44
• /
• 2003

The present work relates to the recovery of dissolved Mo from spent mandrel dissolving acid solution by injecting ammonia gas. In order to optimize the process parameters for high yield and high purity of recovered Mo products, a bench scale and a pilot scale experiments were carried out. As a result, more than 99.5% of Mo in spent acid was recovered in the form of ammonium molybdate(4MoO$_3$.$2NH_3$.$H_2$O). The purity of Mo products recovered was higher than 99.5%. In addition, the mother liquor, residual solution after precipitation and filtration of ammonium molybdate solid particles, could be utilized as fertilizers.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.3
• /
• pp.82-93
• /
• 2014

A starch ball was devised to conveniently supply carbon source to indigenous microorganisms and to enhance biotransformation of explosive compounds(TNT and RDX) in the sediments of settling basins installed in military shooting ranges. To identify optimum dose/sediment ratio for degradation of explosives in the basin, a series of bench scale settling basin experiments were performed for 30 days while monitoring supernatant pH, DO, concentrations of nitrite, nitrate, sulfate, explosive compounds, and acute toxicity measured by bacterial luminescence. Addition of starch ball induced changes in oxidation conditions from oxic to anoxic in the benthic zone of the basin, which resulted in subsequent reductive degradation of both TNT and RDX in the liquid and solid phase of basin. However, fermentation products of excess starch, acetic acid and formic acid, caused acute toxicity in the liquid phase. The optimum ratio of starch ball/sediment for explosive compounds degradation by inducing changes in bio-geochemical environments without increase in acute toxicity, was found to be 0.009~0.017.

• The Journal of Fisheries Business Administration
• /
• v.41 no.3
• /
• pp.129-151
• /
• 2010

This study is to analyze the efficiency of Korean fishing ports using DEA. First, the study calculated the efficiency scores based on a CCR-BCC framework and hence technical, pure technical, and scale efficiency scores are seperated for the 38 fishing ports under study. The Average of technical, pure technical, and scale efficiency are turned out to be 0.6834, 0.8582, and 0.7774 respectively. The 15 fishing ports are fully efficient under the constant returns to scale while 21 fishing ports under the variable returns to scale. Second, the super efficiency scores are also calculated under the radial model without the consideration of slacks. The highest score is turned out to be 4.4984 for the P16 fishing port with the average score of 0.9652 for the entire fishing ports. Nevertheless, P16 fishing port has showed up only once as a reference set. On the other hand, P34 fishing port has showed up 11 times as a reference set, which scored the second highest score of 2.9815. Finally the super efficiency scores are calculated under the non-radial model with the explicit consideration of slacks. Now the P34 fishing port scored the highest score of 2.3424 with even 15 times referred to a bench-mark. Therefore the importance of P34 fishing port is emphasized once again on the field of bench-marking for the efficiency of fishing ports. When the targets for the input factors to improve the efficiency of each DMU are calculated the area of fishing port needs the most adjustment to be reduced for 40.36% on the average, while the cosignment sales area does the least adjustment for 13.70%.

• Tribology and Lubricants
• /
• v.18 no.4
• /
• pp.305-311
• /
• 2002

Three different kinds of brake discs including two coated brake discs and one steel disc were tested under the same experimental conditions on a reduced scale braking test bench. A braking test bench was specially designed to analyse thermo-mechanical and frictional behaviors of two types of brake with different sizes in stop and hold braking modes. Plasma spray coating technique was also used to coat the discs with ceramic powder. During the test four commercial brake pads were coupled with discs. Ceramic coated discs showed good stability in friction coefficient at high speed and high energy braking conditions. But they caused large wear loss of pad mass compared with the steel disc. It was shown that thermal barrier effect in ceramic coated discs adjusted the thermal partition between pad and disc. For a steel disc. it showed fluctuating friction coefficient at high speed but small wear loss of pad mass compared with ceramic coated discs.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.97-107
• /
• 1998

Three different kinds of brake discs including two coated brake discs and one steel disc were tested under the same experimental conditions on a reduced scale braking test bench. Braking test bench was specially designed to analyse thermo-mechanical and frictional behaviors of two sizes of brake discs in stop and hold braking modes. And Plasma spray coating technique was used to coat ceramic powder on the discs. In the test four commercial brake pads were coupled with discs. Ceramic coated discs had shown good stability in friction coefficient at high speed and high energy braking conditions. But they caused large pad mass wear loss compared with the steel disc. It was shown that thermal barrier effect in ceramic coated discs adjusted the thermal partition between pad and disc. For a steel disc, it had shown fluctuating friction coefficient at high speed but a fittie pad mass wear loss compared with ceramic coated discs.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.138-145
• /
• 2007

Among various rapid prototyping processes, stereo-lithography process which can manufacture transparent prototype is known to be the greatest in the form & dimensional accuracy and surface roughness. In this paper, bench mark tests of 4 stereo-lithography-type rapid prototyping apparatus were carried out using transparent materials. The test includes measurement of mechanical properties, form accuracy, building speed and manufacturing cost. It was observed that ViperPRO of 3D systems is advantageous in the mechanical properties and building speed, RM600011 of CMET in sub-milli scale form accuracy and manufacturing cost, and relatively economical Eden500V of Objet is great in tensile strength at room temperature.