• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.865-872
• /
• 2006

Recently, many apartment buildings in the shear wall system often has pilotis in the lower story to meet the architectural needs. If the lateral force resisting system consists of shear walls supported by columns and beams. the discontinuity at the lowest level with pilotis results in the vertical irregularity with strength and stiffness. So, there are needs to be considered tile analysis and design about column and beam bellow shear walls and the behavior and stress condition of structure by stiffness change being generated at shear walls. The purpose of this paper is to investigate the behavior of shear wall structures with pilotis using the floors modeled as rigid diaphragm or semi rigid diaphragm. Through analyses, after estimating values of the story drift, natural period, stress condition of shear walls and the forces of column, we inferred how the behavior of shear wall structures with pilotis was influenced by the floor stiffness.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.83-93
• /
• 2007

This paper represents the development of 3-axises loadcell for measuring the side-force of suspension module of MPV(Multi Purposed Vehicle). The side force causes the failure of damper, such as leakage. The loadcell was developed using strain gauges, and the Wheastone bridge circuit to compensate for the cross-talk between the each axises and the measurement error by temperature. Structure analysis of loadcell was accomplished with FEM(Finite Element Method) to optimize the location of strain gages. The design optimization for important factors that have an effect on performance of loadcell was accomplished by using DOE(Design of Experiment). Loadcell was produced and successfully tested, showing good sensitivity and low cross-talk. The cross-talk of the developed loadcell is bellow 5%. The load history was measured at proving ground. The maximum side-force, the longitudinal force, and vertical force of MPV are 4.2 kN, 8.0 kN, and 17.0 kN, respectively, at Belgian road.

• Journal of The Korean Association For Science Education
• /
• v.15 no.3
• /
• pp.303-309
• /
• 1995

The purpose of this study was to evaluate the effects of STS Programs on science-related attitude of junior high school students. For this study, samples of 198 students who are in grade 8 were selected. The eight STS Programs were used in this study. One group pretest-posttest design was used in this study as an experimental design. The TOSRA was used in this study as the science-related attitude evaluation instrument. The major results of this study are as followings: 1. The effects of STS programs about the junior high school students' science-related attitude indicated that there were no statistically significant differences between pretest and posttest. 2. Total students were classified as high(above about mean) or low (bellow about mean) on the basis of science-related attitude pretest scores. The low level students have improved from using of STS programs in teaching science on science-related attitude scores. The high level students have dropped from using of STS programs in teaching science on science-related attitude scores.

• Nuclear Engineering and Technology
• /
• v.3 no.1
• /
• pp.9-13
• /
• 1971

The levels of strontium-90 in milk produced in Korea were determined during the past six years. Milk samples were collected from dairies and market shops in seoul area. Strontium-90 in milk was separated from calcium using fuming nitric acid and purified radiochemically. After seculear equilibrium was completed, the radioactivity of yttrium-90 was counted in a low background beta counting system. The determination of stable calcium in milk was also made by volu-metric method using 0. 1 N potassium permanganate solution. The highest value of 34.9 pCi $^{90}$ Sr/g-Ca was determined in August, 1966 and the lowest value was 7.5 pCi $^{90}$ Sr/g-Ca in August, 1967. From the result we can say that levels of strontium-90 are decreasing year after year and are far bellow the maximum permissible level recommended by International Committe on Radiation Protection.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.142-149
• /
• 2006

A PIV(Particle Image Velocimetry) was applied to measure in-cylinder velocity field according to inlet valve angle during intake stroke. Two engines, one is conventional DOHC 4 valve and the other is narrow valve angle, were used to compare real intake flow. The results show that the intake flow pattern of conventional engine is more complicated than that of narrow angle one in horizontal plane and the vertical component of in-cylinder flow is rapidly decayed at the end stage of intake. On the other hand, the flow pattern of narrow angle one is relatively well arranged in horizontal plane and the vertical velocity component remains so strongly that forms large-scale strong tumble. Two engines also form commonly three tumble; two are small and bellow the intake valve and one is large-scale. The center of large scale tumble moves to bottom of cylinder as the vertical velocity increases.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.5
• /
• pp.702-710
• /
• 1999

U-shaped bellows are usually used to piping system pressure sensor and controller for refriger-ator. Bellows subjected to internal pressure are designed for the purpose of absorbing deformation. Internal pressure on the convolution sidewall and end collar will be applied to an axial load tend-ing to push the collar away from the convolutions. To find out deformation behavior of bellow sub-jected to internal pressure the axisymmetric shell theory using the finite element method is adopted in this paper. U-shaped bellows can be idealized by series of conical frustum-shaped ele-ments because it is axisymmetric shell structure. The displacements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displace-ments are added to r-z cylindrical coordinates of nodal points. The new stiffness matrix of the sys-tem using the new coordinates of nodal points is adopted to calculate the another increments of nodal displacement that is the step by step method is used in this paper. The force required to deflect bellows axially is a function of the dimensions of the bellows and the materials from which they are made. Spring constant is analyzed according to the changing geometric factors of U-shaped bellows. The FEM results were agreed with experiment. Using developed FORTRAN PROGRAM the internal pressure vs. deflection characteristics of a particu-lar bellows can be predicted by input of a few factors.

• Journal of Sericultural and Entomological Science
• /
• v.44 no.1
• /
• pp.19-21
• /
• 2002

Suwonppong, which is the leading mulberry variety, has the fertility and the characteristics of fruit that are listed bellow. The percent of making seed is 61.8%, the percent of sank seed is 54.7% and the percent of germination is 95%. the percent of cross success is 31.8%. The single fruit weight of mulberry fruit is 3.58 g and its size is medium and big, the color of it is black. The sugar content of mulberry fruit is 15.7%(Brix), the total acidity is 0.18%, and the pH is 6.3. The maturing period of mulberry fruit is medium maturity and the degree of fruit setting is the same as Cheongilppong.

• Journal of Korean Society of Disaster and Security
• /
• v.9 no.2
• /
• pp.43-52
• /
• 2016

Notwithstanding industrial accident decrease generally, Construction industry is on the rise recently. Most accident occurs in the small scale like as multiflex housing, remodeling, neighbourhood facility more than safety supervisor appointed large scale construction site. By the size of business place, 81.6% of total accident occurs mostly in small scale site that is bellow 120 billion won and 50 manpower. This paper aimed that small scale housing company achieve a zero hazard practising and understanding the safety adminstration standar d model easily and it applied firstly after investigating the operation condition of construction site safety control in small scale company propelling the complex style multiflex housing business.

• Journal of Society of Preventive Korean Medicine
• /
• v.4 no.2
• /
• pp.142-151
• /
• 2000

Objectives and Methods : This study was conducted to investigate chief complaints among famers. The subjects of this study were 640 famers who live in the rural area in Wanju-gun Jeonbuk province. They were received medical treatment by oriental doctors who visited each village from July 1996 to June 1999. The data of this study were collected from their medical charts . Results and Conclusions : The number of female patients was 449(70.16%) and the number of male patients was 191(29.84%). The group of patients above 70 years was 32.81%, 60-69 years 32.03%, 50-59 years 20.15%, 40-49 years 8.90%, and bellow 39 years 6.09%. The most frequent complaint in farmers was low back pain(27.16%) the second was knee joint pain(16.14%), the third was shoulder Pain(12.06%), and the fourth was headache-dizziness(9.59%). The frequency of musculoskeletal disease(64.48%) was most high, and cardiovascular disease(11.33%) was the second, gstrointestinal disease(10.73%) was the third, respiratory disease(3.42%) was the fourth. It is necessary to pay attention to musculoskeletal disease-especially low back pain and knee joint pain- in study and treatment of farmer's disease.

• Korean Journal of Soil Science and Fertilizer
• /
• v.23 no.4
• /
• pp.293-296
• /
• 1990

The effect of wallastonite, potassium chloride and potassium sulphate on the ammonification and nitrification of urea was studied in a non-planted green house experiment, filling with 500g soil in plastic pot and incubating for 17 days. Potassium sulphate gave superior effect on the neutralizing soil acidity of wallastonite than potassium chloride and raised soil pH which promoted ammonification and subsequent nitrification of urea. Less than 20% $NO_3-N$ against the sum of $NH_4-N$ and $NO_3-N$ was accumulated in soils incubated bellow pH 6.0. It seemed that pH 5.2 to 6.0 was the critical range for the nitrification of ammonium, or raising the concentration of ammonia in soils to the toxic level to the nitrification. It appeared that the nitrification could be occuring in low moisture, air dried, conditions of soil.