• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.737-742
• /
• 2011

Because of complex structure of inlet and outlet flows, the performance of centrifugal fans used in a household refrigerator is affected by many parameters of duct system surrounding the fans. In this paper, the performance of a centrifugal fan is numerically analysed according to shapes of inlet bell-mouth. To improve performance of the centrifugal fan, some design parameters are selected for comparison. On a basis of these comparison, optimum shape of inlet bell-mouth is proposed to maximise the flow rate of the fan.

• 한국추진공학회지
• /
• 제25권6호
• /
• pp.29-35
• /
• 2021

벨 마우스 흡입구는 압력 손실이 거의 발생하지 않으며 정확한 유량 계측이 가능하다는 장점이 있어 다양한 산업에서 적용되고 있다. 본 연구에서는 벨 마우스 흡입구의 벨 형태를 Long radius 형상으로 설계하였고 야외 환경에서 엔진 운용조건에 대해 흡입되는 공기의 압력강하가 발생되는 동시에 외부 물질에 의한 엔진 손상이 발생되지 않는 적합한 보호망의 격자 사이즈를 선정하였다. 보호망 설치로 인한 전압력 손실에 대해 전산 해석 및 실험 결과 획득한 두 가지 데이터 로부터 수정된 압력 강하 계수 방정식을 제시할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.183-184
• /
• 2006

• 한국음향학회지
• /
• 제19권6호
• /
• pp.3-9
• /
• 2000

The Bell King Songdok the Great tolls magnificient sound that would be a great vehicle which brings all beings to the Sutras. Since 693, there was a magic flute, MANPASIKJUK, which was in existence in Shilla Dynasty that could lull all the evil-wawes, such an plaques, storms, Droughts, Famines and even Enemies. Thus, a sound tube, MANPASIKJUK, was erected in the crown of the Bell Songdok the Great so as to be effective to emit the nominal frequency tone whenever the Bell tolls for the national prosperity and welfare the People. Therefore, the Bell makers tried to fine the transmissibility condition through the sound tubr, several times during 34 years, However, it seems to be unfinished. Ever since, all of the korean Brahman Bell have the sound tubes of MANPASIKJUK, but none is performed their own functions. Here, one of the way to let the function of the sound tube of MANPASIKJUK out in the Bell Songdok the Great is proposed. There are two steps: the 1st is to elongate 18cm to the present length 77cm to fulfill the transmissibility condition for the nominal frequency of sound is emitted through the corrected sound tybe. 2nd step is to rise to 95% of the emission of the tone of nominal frequency, so that an exponential hem with the flare constant 2.8m-1, length 2.259m and the radius of the mouth 1.772m is to be extended to the corrected sound tube.

• 상하수도학회지
• /
• 제26권3호
• /
• pp.463-469
• /
• 2012

The efficiency of the flow mixed pump installed within the bell-mouth in the sump is reduced by the flow characteristics of around intakes. Strong submerged vorticies can be successfully suppressed by installing an AVD(anti-submerged vortex device) on the bottom of pump intake channel just below the bell-mouth. Sump model with AVD device basin is designed and the characteristics of submerged vortex is investigated in the flow field by numerical simulation. In this study, a commercial CFD code is used to predict the efficiency of the pump with the AVD installation in the pump station accurately.

• 한국유체기계학회 논문집
• /
• 제10권4호
• /
• pp.39-46
• /
• 2007

In large pump station, vortex generation such as free-surface vortex and submerged vortex occurring around pump intake, or at bell-mouth inlet has been an important flow characteristics which should be considered always to keep away the suction of air-entrained or cavitated flow. In this study, a commercial CFD code was used to predict accurately the vortex generation for the specified intake design. These result shows the preliminary result of submerged vortex prediction for the Turbo-machinery Society of Japan Sump Test CFD standard model. At bottom wall, air volume fraction (red color) was found in a large scale to explain the submerged vortex generation at particular operation and configuration condition. And these indicate the free surface formation behind the bell mouth. Particularly, non-uniform approaching flow is a major parameter to govern the occurrence of the free-surface vortex. Futhermore the comparison between turbulence ($k-{\epsilon}$ & $k-{\omega}$ model) mode were executed in this study.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.251-254
• /
• 2005

The flow forming has been used to produce long thin walled tube parts, with reduced forming load and enhanced mechanical and surface quality for a good finished part compared with other method formed parts. So flow forming technique is used widely in industrial production. Especially spinning and flow farming techniques an used frequently in automotive, aerial, defense industry. In this paper, FEM analysis of three-roller backward flow forming of a workpiece is carried out to study effects of forming depth and feed rate on forming force. The axial and radial forces on several forming depth and feed rate conditions are obtained. The phenomena such as bell mouth, build up and bulging during simulation are observed as well.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.244-249
• /
• 2008

In this study, the characteristics of flow in outdoor unit were numerically analyzed. Parametric studies were performed to compare the effect of bell mouth height, fan height and fan width concerned with flow rate. The result indicated that the flow rate was dependent on the bell mouth height, while it was negligibly affected by the fan height and fan width. The fan width was found to affect the velocity distribution at heat exchanger face.

• Journal of Acupuncture Research
• /
• 제27권3호
• /
• pp.137-146
• /
• 2010

Objectives : While there are many studies about treatments of facial palsy, no study has been performed on general population of Korea, especially concerning about comparison between western medicine and oriental medicine. This study aimed to investigate magnitude of health visits and treatment patterns for Korean patients with facial palsy through the computerized database of Health Insurance Review and Assessment Service(HIRAS). Methods : According to the HIRAS database over 5 years' period from 2004 to 2008, the medical records of patients with facial palsy as a main diagnosis were extracted. Inclusion criteria of facial palsy are Bell's palsy(G510), Geniculate ganglionitis(G511), Melkersson's syndrome(G512), Other disorders of facial nerve(G518), Disorder of facial nerve, unspecified(G519) in western medicine. And Paralytic face(G016), Deviated eye and mouth(J01), The other facial palsy(J013) were included in oriental medicine. We compared the claim number of western medical care with that of oriental medicine treatment by year and month. Results : The total claim number of facial palsy was increasing on both western medicine and oriental medicine from 2004 to 2008. In western medicine, the claim number of Bell's palsy(G510) is the most. In oriental medicine the inpatients claim number of Deviated eye and mouth(J01) is the most, while outpatients claim number of the other facial palsy(J013) is the most. Conclusions : Medical database of HIRAS provided comprehensive and vast information on epidemiologic characteristics and treatment, which can be more reliable data to expect medical demand for facial palsy in condition that accurate diagnosis and standardized treatment is delivered in clinical settings.

• 한국지반신소재학회논문집
• /
• 제2권1호
• /
• pp.47-55
• /
• 2003

14가지 니들펀치 부직포 지오텍스타일의 섬유구성인자인 두께, 기공도, 섬유장 및 직경 등이 수평투수성에 미치는 영향을 평가하였으며, 두께변화, 수평투수도, 압축 하중 하에서의 수평투수성을 구성방정식에 의해 분석, 평가하였다. 그리고 섬유 패킹 밀도가 다른 라미나(laminar) 지오텍스타일 복합재료를 제조하여 라미나 구조가 수직투수성에 미치는 영향을 평가하였다. 수평투수도는 부직포 지오텍스타일의 두께가 증가할수록 커졌으며, 기공도와 섬유직경이 커질수록 수평투수계수는 증가하였다. 수직응력이 증가할수록 기공도의 영향은 감소하였으며, 섬유장이 길수록 수평투수계수는 약간 크게 나타났다. 구성섬유의 직경이 클수록 수평 투수계수는 커지며, 직경의 비슷할수록 유사한 투수계수를 나타내었다. 라미나 지오텍스타일의 수직 투수성은 내부 경계면에서의 손실 수두에 영향을 받으며, 경계면에서 투수로의 연결형상은 bell mouth형이거나 부드러운 유입관 형태로 평가 되었다.