• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1303-1311
• /
• 1988

Described is method for development of an optical roughness measurement sensor for in-subequality assurance in the precision grinding. Main approach is made based upon the Brckmann's light scattering theory, in which general solutions of the optical scattering behaviour are given under many simplifying assumptions on the model of the surfaces illuminated. For the ground surface, the assumptions are verified through computer simulation and experimental work in order to examine the validity of Beckmann's theory on predicting the optical responses according to the roughness variation. As a result, an optical monitoring strategy is derived which can evaluate the roughness value of the ground surface by statistically detecting the pattern of intensity distribution of the scattered light. Finally, the strategy is proven by comparing with the results using the stylus method.

• Structural Engineering and Mechanics
• /
• v.69 no.1
• /
• pp.51-67
• /
• 2019

In this paper, the anisotropy of tensile behaviours of layered rocks consisting internal notch has been investigated using particle flow code. For this purpose, firstly calibration of PFC2D was performed using Brazilian tensile strength. Secondly Brazilian test models consisting bedding layer was simulated numerically. Thickness of layers was 10 mm and layered angularity was $90^{\circ}$, $75^{\circ}$, $60^{\circ}$, $45^{\circ}$, $30^{\circ}$, $15^{\circ}$ and $0^{\circ}$. The strength of bedding interface was too high. Each model was consisted of one internal notch. Notch length is 1 cm, 2 cm and 4 cm and notch angularities are $60^{\circ}$, $45^{\circ}$, $30^{\circ}$, $15^{\circ}$ and $0^{\circ}$. Totally, 90 model were tested. The results show that failure pattern was affected by notch orientation and notch length. It's to be noted that layer angle has not any effect on the failure pattern. Also, Brazilian tensile strength is affected by notch orientation and notch length.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.09a
• /
• pp.149-157
• /
• 1994

In this study two dimensional visco-plastic finite element model capable of handling the multi-step excavation was developed for investigating the effect of excavation support sequences on the behavior of underground openings in the jointed rock mass. First, the finite element model which is capable of handling the multi-step excavation is developed and verified. And then the model is combined with visco-plastic joint model. Ubiquitous joint pattern was considered in the model and joint properties in cach set were assumed to be indentical. Passive, full-grouted rockbolts were cosidered in the numerical model. The visco-plastic deformations of joints and rockbolts were assumed to be governed by Mohr-Conlomb and von Mises yield criteria, respectively. With the ability of removing elements, the model can simulate the multi-step excavation-suppport sequences. The reliability and applicability of the model to the stability analysis for the underground excavation in pratice was checked by simulating the behavior of underground crude oil storage caverns under construction.

• Steel and Composite Structures
• /
• v.18 no.1
• /
• pp.213-233
• /
• 2015

A nonlinear finite element analysis (FEA) model is presented for simulating the behaviour of recycled aggregate concrete-filled steel tube (RACFST) beam-columns subjected to constant axial compressive load and cyclically increasing flexural loading. The FEA model was developed based on ABAQUS software package and a displacement-based approach was used. The proposed engineering stress versus engineering strain relationship of core concrete with the effect of recycled coarse aggregate (RCA) replacement ratio was adopted in the FEA model. The predicted results of the FEA model were compared with the experimental results of several RACFST as well as the corresponding concrete-filled steel tube (CFST) beam-columns under cyclic loading reported in the literature. The comparison results indicated that the proposed FEA model was capable of predicting the load versus deformation relationship, lateral bearing capacity and failure pattern of RACFST beam-columns with an acceptable accuracy. A parametric study was further carried out to investigate the effect of typical parameters on the mechanism of RACFST beam-columns subjected to cyclic loading.

• International Journal of Knowledge Content Development & Technology
• /
• v.10 no.2
• /
• pp.7-18
• /
• 2020

Communication is a process involving a group of interrelated elements working together for the purpose of information transfer. This paper discusses information retrieval as a communication process in the 21st century library. The difficulties associated with access to recorded knowledge through bibliographic control devices have been exacerbated by the interposition of additional encoding processes in the library and further decoding by the users. In addition, the innovation of internet/web has revolutionized the means and mode of communication process in the library by flooding information seekers with information and creating an illusion of self-sufficiency in many users. With these changes in information seeking behaviour and pattern, a cybernetic approach to information retrieval has emerged emphasizing adaptive control mechanisms and feedback processes. This paper argues that libraries should strive to continuously remain relevant by keeping abreast with changes in the behavior of information users. To this end, this paper proposes apomediatic-cybernetic model of communication, which illustrates information retrieval processes for the 21st-century library.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.403-406
• /
• 1999

Although infilled wall considered as a non-structural element, the infilled applied in reinforced concrete frame structural systems represents an important element influencing the behaviour and the stability of a structure under seismic effect. This research is performed an experimental investigation of gravity-load designed single-stroy, single-bay, low-rise nonseismic moment-resisting reinforced concrete frame 2 dimension specimens to evaluate the effect of seismic capacity. For pseudo static test, it was manufactured one half scale specimens of two types (Bare Frame, Infilled Frame) based on typical building. The results of these experiments provided regarding the global as well as the local responses of 1) Crack pattern and failure modes, 2) Stiffness, strength.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.7 s.250
• /
• pp.849-856
• /
• 2006

In this paper, fabric composite draping on hemisphere moulds were studied to find out the deformation behaviour of micro-tow structures of fabrics during draping and thermoforming. Aluminium and PVC foams were used to fabricate the hemisphere moulds for draping tests. In order to observe the local tow deformation pattern during the draping several specimens for microscopic observation were sectioned from the draped hemisphere structures. The effect of forming condition and mould properties on tow deformation was investigated by the microscopic observation of the tow parameters such as crimp angle. Normalization scheme was performed to compare tow parameter variations with different forming conditions. Stress-strain .elations of two different PVC foams (HT70 and HT110) were tested to investigate the effect of foam property on the micro-tow deformation during forming.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.4
• /
• pp.34-45
• /
• 2001

In the persent study, we conducted numerical experiments using a three-dimensional baroclinic equation model and a Lagrangian method for clarifying the hydrodynamics in Osaka Bay under the yearly mean discharge and visualizing the behaviour of particles of different settling velocity discharged from Yodo River and sedimentation pattern on the sea bottom. Particles are transported from the Yodo River to the south direction by the residual circulation of the bay head at the first stage, and after most of suspended solids particles are settled down at any layer and returned in the south-east coastal area through bottom layers by an estuarine circulation. The results show that estuarine circulation plays an important part of suspended solids transportation in the Osaka Bay.

• Steel and Composite Structures
• /
• v.5 no.4
• /
• pp.305-326
• /
• 2005

The inelastic buckling behaviour of continuously restrained two and three-span continuous beams subjected to concentrated loads and uniformly distributed loads are studied in this paper. The restraint type considered in this paper is fully restrained against translation and elastic twist applied at the top flange. These types of restraints are most likely experienced in industrial structures, for example steel-concrete composite beams and half through girders. The buckling analysis of continuous beam consists of two parts, firstly the moment and shear distribution along the member are determined by employing force method and the information is then used for an out-of-plane buckling analysis. The finite element method is incorporated with so-called simplified and the polynomial pattern of residual stress. Owing to the inelastic response of the steel, both the in-plane and out-of-plane analysis, which is treated as being uncoupled, extend into the nonlinear range. This paper presents the results of inelastic lateral-torsional and lateral-distortional buckling load and finally conclusions are drawn regarding the web distortion.

• Computers and Concrete
• /
• v.1 no.3
• /
• pp.227-248
• /
• 2004

A combined experimental-computational study of a double edge-notched stone specimen subjected to tensile loading is presented. In the experimental part, the load-deformation response and the displacement field around the crack tip are recorded. An Electronic Speckle Pattern Interferometer (ESPI) is used to obtain the local displacement field. The experimental results are used to validate a numerical model for the description of fracture using finite elements. The numerical model uses displacement discontinuities to model cracks. At the discontinuity, a plasticity-based cohesive zone model is applied for monotonic loading and a combined damage-plasticity cohesive zone model is used for cyclic loading. Both local and global results from the numerical simulations are compared with experimental data. It is shown that local measurements add important information for the validation of the numerical model. Consequently, the numerical models are enhanced in order to correctly capture the experimentally observed behaviour.