• 인터넷정보학회논문지
• /
• 제12권6호
• /
• pp.161-170
• /
• 2011

UML의 상태도는 CASE 도구마다 다르게 표현될 수 있어서 실제 적용에 어려움이 많지만, 시스템이 동작하는 측면을 효과적으로 나타낼 수 있다는 점에서 활용성이 높다. 상태도에서 소스를 생성하는 선행 연구를 보면, 단순한 분기문 또는 설계패턴 등을 적용하고 있지만 그 기술에 따라 생성된 소스코드에 차이가 있을 수 있다. 본 논문에서는 상태도를 문법형식에 맞게 엄격히 정의해서 소스코드를 생성하였다. 우선 서로 다른 CASE도구에서 작성된 상태도에서 추출된 XMI를 정제하였다. 여기서 EHA로 변환을 한 후 상태를 인식하였다. 그리고 상태도의 메타모델에 사용된 요소별로 자바 프로그래밍으로 전환하여 소스코드를 생성하고 기능성과 유지보수성을 측정하여 생성된 코드를 검증하였다. 본 논문에서 적용된 사례는 '에어컨'으로서, 다양한 상태와 전이가 포함되어 소스코드 생성에 적합하여 선정하였다. 그 결과 에어컨 사례의 상태도로부터 CASE 독립적인 XMI를 추출하여 정련한 후, 상태도에서의 동시성과 계층이 성공적으로 표현되었음을 확인했다. 향후 좀 더 큰 규모의 시스템에 적용하여 검증하는 연구가 필요하다.

• 한국지반공학회논문집
• /
• 제27권12호
• /
• pp.53-68
• /
• 2011

본 연구에서는 기존 NATM 터널공법의 문제점을 개선한 신개념의 NATM Composite 라이닝 공법 개발에 대한 기초 연구를 수행하였다. 먼저 NATM Composite 라이닝 공법의 개요 대하여 소개하고 시공성에 대한 검토를 수행하였다. 그리고 NATM Composite 라이닝 공법의 개발을 위한 기초 연구로서 고성능 PC 패널 라이닝의 개발을 위해 다양한 혼화재료의 영향을 검토하고, PC 패널 설치 위치별 최적 배합을 도출하였다. 또한 PC 패널 배면 뒤채움재로 경량기포 모르타르 재료를 개발하였으며 실대형 하중재하 실험을 통해 NATM Composite 라이닝 공법의 거동 특성을 규명하였다. NATM Composite 라이닝 공법은 기존 현장타설 라이닝 공법에 비해 안정성과 시공성을 크게 향상 시킬 수 있을 것으로 판단된다.

• 미생물학회지
• /
• 제38권2호
• /
• pp.113-118
• /
• 2002

혐기-무산소조건으로 구성된 회분식 반응조에서 질산염을 이용하여 인(P)도 동시에 제거될 수 있는 가능성을 알아보기 위해서 인의 제거 양상을 혐기-호기조건의 반응조와 비교하여 조사하였고, 질산염과 인을 동시에 제거하는 미생물분포를 분석하였다. 그 결과 비교적 낮은 농도의 유기물이 적용되었을 때(평균 CODcr=130mg/ι)두 반응조 모두 인이 효과적으로 제거되었으며 반응조내의 최종 인의 농도를 1 mg P/L. 이하로 유지하였다. 특히, 질산염을 전자수용체로 이용한 혐기-무산소조건의 반응조는 기존의 영양소제거 시스템과 비교하여 5-7 mg (P+N)/ι의 영양소를 추가적으로 제거하여 유기물의 효과적 인 이용이 가능한 것으로 판명되었다. 혐기-무산조 조건의 방응조내 미생물 분포를 조사 한 결과 질소원을 제거하는 미생물군(denitrifying bacteria)과 인을 제거하는 미생물군(polyphosphate accumulating bacteria)이 함께 존재하고 있음이 밝혀졌고, 이들 중 $\beta$-proteobacteria에 속하는 Zoogloea ramigera와 Rhodocyclus에 포함되는Alcaligenes defragrans 등은 탈질능력 이 있으면서 anoxic상태에서 인을 동시에 축적할 수 있는 탈질-탈인균주(denitrifying phosphate accumulating organisms; dPAO)로 조사되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.729-737
• /
• 2008

As increasing demand on marine structures and skyscrapers, a deep shaft pile foundation is more to be used for the place having weak ground strength. Because heavy horizontal force is generally applied on upper part of pile foundation used in civil or architectural construction, steel pile is largely used with its high resistance to shear force and bending moment, and its capability to carry heavy loads. The steel pile has advantage in good constructibility, high applicability on site and easy handing, but has disadvantage in cost, more expensive than other material pile. This study is about the Composite pile that makes economical construction possible by reducing material cost of pile; using steel and PHC pile simultaneously while preserving the advantage of steel pile that large resistance to horizontal force and bending moment. A Non Welding connection method is applied to this composite pile and this method could reduce the cost and period of construction and could increase the quality of construction by solving the problem of current welding method and by improving the workability of pile connection. In this study, characteristics of driveability of non welding composite pile is analyzed prior to main project while the purpose of main project is proving the applicability of Non Welding Composite Pile by conducting various kind of loading test to analyze the characteristics behaviour of Non Welding Composit Pile and by verifying stability of non welding connection pile.

• Structural Engineering and Mechanics
• /
• 제56권5호
• /
• pp.707-726
• /
• 2015

There is a growing trend of considering uncertainty in optimization process since last few decades. In this regard, Robust Design Optimization (RDO) scheme has gained increasing momentum because of its virtue of improving performance of structure by minimizing the variation of performance and ensuring necessary safety and feasibility of constraint under uncertainty. In the present study, RDO of reinforced concrete folded plate and shell structure has been carried out incorporating uncertainty in the relevant parameters by Monte Carlo Simulation. Folded plate and shell structures are among the new generation popular structures often used in aesthetically appealing constructions. However, RDO study of such important structures is observed to be scarce. The optimization problem is formulated as cost minimization problem subjected to the force and displacements constraints considering dead, live and wind load. Then, the RDO is framed by simultaneously optimizing the expected value and the variation of the performance function using weighted sum approach. The robustness in constraint is ensured by adding suitable penalty term and through a target reliability index. The RDO problem is solved by Sequential Quadratic Programming. Subsequently, the results of the RDO are compared with conventional deterministic design approach. The parametric study implies that robust designs can be achieved by sacrificing only small increment in initial cost, but at the same time, considerable quality and guarantee of the structural behaviour can be ensured by the RDO solutions.

• 대한토목학회논문집
• /
• 제39권1호
• /
• pp.115-122
• /
• 2019

강섬유 습식Shotcrete는 굳지 않은 콘크리트를 노즐로부터 소정의 위치에 부착시키는 콘크리트를 시공함으로서 원지반 자체의 전단강도를 증가시켜 품질을 향상시키고 터널의 안정화를 도모한다. 강섬유 습식Shotcrete는 인장 저항능력을 증대시킴으로써 국부적인 균열의 생성 성장을 억제하는 콘크리트의 강도와 역학적 거동 특성을 개선 및 보강한다. 또한, 강섬유 습식Shotcrete는 불연속의 짧은 강섬유를 콘크리트 속에 균등하게 분산시켜 인장강도, 휨강도, 균열에 대한 저항성 등을 개선한 Shotcrete이다. 이 연구에서는 NATM 터널의 숏크리트에 대한 압축강도 시험과 휨강도 시험을 실시하고 숏크리트타설 압력을 900 RPM, 1,000 RPM, 1,100 RPM으로 변화시켜 리바운드 감소율을 측정하였다. 따라서 국내 NATM 터널공사에 적용할 수 있는 자료를 제시하였다.

• Physical Therapy Rehabilitation Science
• /
• 제11권1호
• /
• pp.8-15
• /
• 2022

Objective: Post stroke motor recovery is facilitated by the brain reorganization or the neuroplastic changes. The therapeutic approach mentioned in the current case is one of the approaches for enhancing motor recovery by stimulating the damaged neural networks directing the motor behaviour of a person. The aim of the present study was to establish the changes in the balance and gait pattern of an individual through multi target stimulation of areas of cerebral cortex by utilising multichannel trans cranial direct current stimulation (M-tDCS) in a sub-acute stroke survivor. Design: A Case Report Methods: The present patient was the participant of the trial (CTRI/2021/02/031044).The patient was intervened with M-tDCS (anodes over left primary motor cortex that is C3 point and left dorsolateral prefrontal cortex i.e., F3 point and cathodes over supraorbital areas, Intensity - 1.2mA) for the duration of 20 minutes along with turbo med extern - an AFO to facilitate ankle dorsi flexion and conventional physiotherapy rehabilitation. The Fugl-Meyer assessment lower extremity (FMA-LE), Berg Balance Scale (BBS), Wisconsin Gait Scale (WGS) and the Stroke Specific Quality of Life (SSQOL) measures were used for outcome assessment. Baseline assessment was done on day 0 followed by assessment on 10 and 20 post intervention. Results: Improvement was seen in all the tools i.e. (FMA -LE), BBS, SSQOL and WGS over the time period of 20 days. Conclusions: M-tDCS resulted in improvement in gait parameters, balance and motor functions of lower extremity of the patient.

• Physical Therapy Rehabilitation Science
• /
• 제9권4호
• /
• pp.318-323
• /
• 2020

Objective: Reacquisition of motor functions following stroke depends on interhemispheric neural connections. The intervention highlighted in the present case is an insight for augmenting motor recovery by stimulating the lesioned area and adjacent areas governing the motor behaviour of an individual. The purpose of this study was to determine the changes in the motor and cognitive outcomes through multi target stimulation of cortical areas by application of multichannel transcranial direct current stimulation (M-tDCS) in a stroke survivor. Design: A case report. Methods: The patient was a participant of a trial registered with the clinical trial registry of India (CTRI/2020/01/022998). The patient was intervened with M-tDCS over the left primary motor cortex i.e. C3 point and left dorsolateral prefrontal cortex i.e. F3 point with 0.5-2 mA intensity for the period of 20 minutes. SaeboFlex-assisted task-oriented training, functional electrical stimulation over the lower extremity (LE) to elicit dorsiflexion at the ankle and eversion of the foot, and conventional physiotherapy rehabilitation including a tailored exercise program were performed. Outcome assessment was done using the Fugl-Meyer assessment scale (FMA) for the upper and lower extremity (UE and LE), Montreal Cognitive Assessment (MOCA), Wisconsin Gait Scale (WGS) and the Stroke Specific Quality of Life (SSQOL) measures. Assessment was taken at Day 0, 15 and 30 post intervention. Results: Improvement was observed in all the outcome measures i.e FMA (UE and LE), MOCA, SSQOL and WGS across the span of 4 weeks. Conclusions: M-tDCS induced improvement in motor functions of the UE and LE, gait parameters and cognitive functions of the patient.

• Smart Structures and Systems
• /
• 제29권2호
• /
• pp.267-278
• /
• 2022

Pre-stressed concrete circular spun piles are widely used in various infrastructure projects around the world and offer an economical deep foundation system with consistent and superior quality compared to cast in-situ and other concrete piles. Conventional methods for measuring the lateral response of piles have been limited to conventional instrumentation, such as electrical based gauges and pressure transducers. The problem with existing technology is that the sensors are not able to assist in recording the lateral stiffness changes of the pile which varies along the length depending on the distribution of the flexural moments and appearance of tensile cracks. This paper describes a full-scale bending test of a 1-m diameter spun pile of 30 m long and instrumented using advanced fibre optic distributed sensor, known as Brillouin Optical Time Domain Analysis (BOTDA). Optical fibre sensors were embedded inside the concrete during the manufacturing stage and attached on the concrete surface in order to measure the pile's full-length flexural behaviour under the prescribed serviceability and ultimate limit state. The relationship between moments-deflections and bending moments-curvatures are examined with respect to the lateral forces. Tensile cracks were measured and compared with the peak strains observed from BOTDA data which corroborated very well. By analysing the moment-curvature response of the pile, the structure can be represented by two bending stiffness parameters, namely the pre-yield (EI) and post-yield (EI_cr), where the cracks reduce the stiffness property by 89%. The pile deflection profile can be attained from optical fibre data through closed-form solutions, which generally matched with the displacements recorded by Linear Voltage Displacement Transducers (LVDTs).

• 한국축산식품학회지
• /
• 제42권2호
• /
• pp.210-224
• /
• 2022

The use of skim milk is a strategy to increase goat milk yogurt acceptability. However, it can negatively affect yogurt rheology because fat plays a vital role in dairy structural integrity. Thus, this study aimed to investigate the effects of fat replacers on the rheological, physical, and sensory parameters of low-fat cupuassu goat milk yogurts during refrigerated storage (28 days). Five goat milk yogurts formulations were carried out: whole yogurt (WY), skim yogurt (SY), skim yogurt with inulin (SIY), skim yogurt with maltodextrin (SMY), and skim yogurt with whey protein (SWY). Treatments were subjected to bacterial counts, chemical composition, pH, water holding capacity, instrumental color and texture, rheological and sensory analyses. All samples showed reducing pH values, water holding capacity, and L^* and b^* value during storage. Regarding texture, the firmness and consistency decreased during storage. On the other hand, the viscosity index significantly increased during refrigerated storage time. Moreover, all treatments exhibited viscoelastic behaviour. In addition, SIY and SMY showed the highest apparent viscosity. Furthermore, SIY, SMY, and SWY formulations exhibited positive sensory scores for appearance, color, aroma, texture, and viscosity. However, the overall acceptability and purchase intention did not differ statistically between WY and the fat-replacement treatments (SIY, SMY, and SWY). These results indicate that fat substitutes improved the quality of skimmed formulations. Thus, inulin and maltodextrin have the potential as functional fat replaces to produce low-fat goat milk yogurts.