• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.4
• /
• pp.381-387
• /
• 1996

An experiment was carried out for 12 weeks to study the feeding behaviour, growth and carcass characteristics of cross-bred goats. Nine bucks with an average live weight of $18.02{\pm}0.9kg$ were allocated in a completely randomized block design arrangement, consisting of three feeding regimes and three blocks. The feeding regimes consisted of 100% natural grass (Treatment A), 100% gliricidia leaf (Treatment B) and 100% ficus leaf (Treatment C). Frequency of turning-over and sniffing the feed and duration and frequency of ruminating, defaecating, and urination of goats in treatment B were longer, while duration of masticating and jaw movement of chewing one bolus was shorter than those of goats in treatments C and A (p < 0.05). Furthermore, goats in treatment B gained more live weight, consumed more feed, consumed less water and was more efficient in utilizing the feed than goats in treatments C or A (p < 0.05). The dressing percentage, carcass length and carcass fat of goats in treatment B were higher and their bone percentages were lower than those in treatments C and A (p < 0.05). There is an indication that feeding gliricidia and ficus leaves during the dry season could not only increase the body weight and improve carcass quality of the goat but also save water for household needs.

• Steel and Composite Structures
• /
• v.19 no.6
• /
• pp.1403-1419
• /
• 2015

When precast concrete infill panels are connected to steel frames at discrete locations, interaction at the structural interface is neither complete nor absent. The contribution of precast concrete infill panels to the lateral stiffness and strength of steel frames can be significant depending on the quality, quantity and location of the discrete interface connections. This paper presents preliminary experimental and finite element results of an investigation into the composite behaviour of a square steel frame with a precast concrete infill panel subject to lateral loading. The panel is connected at the corners to the ends of the top and bottom beams. The Frame-to-Panel-Connection, FPC4 between steel beam and concrete panel consists of two parts. A T-section with five achor bars welded to the top of the flange is cast in at the panel corner at a forty five degree angle. The triangularly shaped web of the T-section is reinforced against local buckling with a stiffener plate. The second part consists of a triangular gusset plate which is welded to the beam flange. Two bolts acting in shear connect the gusset plate to the web of the T-section. This way the connection can act in tension or compression. Experimental pull-out tests on individual connections allowed their load deflection characteristics to be established. A full scale experiment was performed on a one-storey one-bay 3 by 3 m infilled frame structure which was horizontally loaded at the top. With the characteristics of the frame-to-panel connections obtained from the experiments on individual connections, finite element analyses were performed on the infilled frame structures taking geometric and material non-linear behaviour of the structural components into account. The finite element model yields reasonably accurate results. This allows the model to be used for further parametric studies.

• International Journal of Knowledge Content Development & Technology
• /
• v.4 no.1
• /
• pp.23-37
• /
• 2014

The Trust and Authority in Scholarly Communications in the Light of the Digital Transition research project1) was a study which investigated the behaviours and attitudes of academic researchers as producers and consumers of scholarly information resources in respect to how they determine authority and trustworthiness. The research questions for the study arose out of CIBER's studies of the virtual scholar. This paper focuses on elements of this study, mainly an analysis of a scholarly publisher's usage logs, which was undertaken at the start of the project in order to build an evidence base, which would help calibrate the main methodological tools used by the project: interviews and questionnaire. The specific purpose of the log study was to identify and assess the digital usage behaviours that potentially raise trustworthiness and authority questions. Results from the self-report part of the study were additionally used to explain the logs. The main findings were that: 1) logs provide a good indicator of use and information seeking behaviour, albeit in respect to just a part of the information seeking journey; 2) the 'lite' form of information seeking behaviour observed in the logs is a sign of users trying to make their mind up in the face of a tsunami of information as to what is relevant and to be trusted; 3) Google and Google Scholar are the discovery platforms of choice for academic researchers, which partly points to the fact that they are influenced in what they use and read by ease of access; 4) usage is not a suitable proxy for quality. The paper also provides contextual data from CIBER's previous studies.

• Journal of Korea Water Resources Association
• /
• v.49 no.9
• /
• pp.789-798
• /
• 2016

Frequent algal blooms at major river systems in Korea have been serious social and environmental problems. Especially, the appearance of cyanobacteria with toxic materials is a threat to secure a safe drinking water. In order to model the behaviour of cyanobacteria cell number, an exclusive causality analysis using prewhitening technique was introduced to delineate effective parameters to predict the cell numbers of cyanobacteria in Seungchon Weir and Juksan Weir along Youngsan river system. Both input and output transfer function models were obtained to explain temporal variation of cyanobacteria cell number. A threshold behaviour of water temperature was implemented into the model development to consider winter characteristic of cyanobacteria. The implementation of water temperature threshold into the model structure improves the predictability in simulation. Even though the input output transfer model cannot completely explained all blooms of cyanobacteria, the simple structure of model provide a feasibility in application which can be important in practical aspect.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.1
• /
• pp.140-146
• /
• 2014

This experiment aimed to evaluate the effects of different housing systems on behavioral activities, welfare and meat quality of fast-growing broilers. Two hundred broilers were allocated into two housing systems: indoor housing vs indoor with outdoor access. Their general behavior (feeding, drinking, fighting, standing, lying, walking, investigating, dust-bathing and preening) was observed, and tonic immobility, fluctuating asymmetry of legs and wings were measured, and meat quality was analyzed. The results showed that the indoor-housed broilers with outdoor access had significant higher standing, walking, investigating, dust-bathing and preening than those indoor only. However, farming system was not found to significantly affect their feeding, drinking and fighting activities (p>0.05). The value of FA of tibia length of the broilers with outdoor access was significantly lower than that of the indoor-housed birds ($1.57{\pm}1.30$ vs $2.76{\pm}1.40$, p<0.05), while no difference was found for the value of FA in tibia diameter and wing length (p>0.05). TI of the broilers with outdoor access was 165.5 that was significantly higher than that (147.2) of the indoor birds (p<0.05). However, death rate in the outdoor run groups was significantly higher than that of the indoor ones ($2.0{\pm}0.81$ vs $4.0{\pm}0.82$, p<0.05). Meat quality was not affected by the two farming systems. It can be concluded that the results of this study may suggest that the indoor housing with outdoor access provides enriched environment for broilers and facilitates the expression of natural behaviors of the broilers but resulted in poorer performance and higher death rate.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3865-3869
• /
• 2013

Background: Cigarette per day (CPD) use is a key smoking behaviour indicator. It reflects smoking intensity which is directly proportional to the occurrence of tobacco induced cancers. Self reported CPD assessment in surveys may suffer from digit bias and under reporting. Estimates from such surveys could influence the policy decision for tobacco control efforts. In this context, this study aimed at identifying underlying factors of digit bias and its implications for Global Adult Tobacco Surveillance. Materials or Methods: Daily manufactured cigarette users CPD frequencies from Global Adult Tobacco Survey (GATS) - India data were analyzed. Adapted Whipple Index was estimated to assess digit bias and data quality of reported CPD frequency. Digit bias was quantified by considering reporting of '0' or '5' as the terminal digits in the CPD frequency. The factors influencing it were identified by bivariate and logistic regression analysis. Results: The mean and mode of CPD frequency was 6.7 and 10 respectively. Around 14.5%, 15.1% and 15.2% of daily smokers had reported their CPD frequency as 2, 5 and 10 respectively. Modified Whipple index was estimated to be 226.3 indicating poor data quality. Digit bias was observed in 38% of the daily smokers. Heavy smoking, urban residence, North, South, North- East region of India, less than primary, secondary or higher educated and fourth asset index quintile group were significantly associated with digit bias. Discussion: The present study highlighted poor quality of CPD frequency data in the GATS-India survey and need for its improvement. Modeling of digit preference and smoothing of the CPD frequency data is required to improve quality of data. Marketing of 10 cigarette sticks per pack may influence CPD frequency reporting, but this needs further examination. Exploring alternative methods to reduce digit bias in cross sectional surveys should be given priority.

• The Research Journal of the Costume Culture
• /
• v.11 no.3
• /
• pp.331-339
• /
• 2003

This study first defines the fashion convention industry as an idea that includes international conventions, exhibitions and collections mainly dealing with fashion (fabric·material, clothing·fashion, and machinery·equipment). It then infers constituents of the industry based on preceding studies on service quality and satisfaction, and analyzes their importance and the structural relation between constituent performance, satisfaction and ex post behaviour. Also it analyzes perception difference of the organizer and participators on constituent importance, performance, and satisfaction. In the survey, a total of 500 questionnaires were distributed to the organizers and participants of 2001 Seoul Fashion Week, and among them, 259 questionnaires from the participants and 18 from the organizers were used as data for the demonstrative analysis. LISREL 8 program and SPSS WIN V. 8.0 were used for a statistical process of collected data.

• Steel and Composite Structures
• /
• v.6 no.2
• /
• pp.139-157
• /
• 2006

In this paper, a cyclic mechanical model is presented to simulate the behaviour of top and seat with web angle beam-to-column connections. The introduced mechanical model is compared with Eurocode 3 Annex J, its extension, and with experimental data. To have a better insight regarding the actual response of the joints, available results of the experiments, carried out on full-scale top and seat angle joints under monotonic and cyclic loading, are first considered. Subsequently, a finite element model of the test setup is developed. The application of the proposed model, its comparisons with the experimental curves and with the Eurocode 3 Annex J and with its modification, clearly show the excellent quality of the model proposed.

• Journal of Mechanical Science and Technology
• /
• v.16 no.1
• /
• pp.60-74
• /
• 2002

In this study, normal, log-normal, triangular, uniform. Weibull, Erlang and unit beta probability density functions are tried to represent the behaviour of frequency distributions of workpiece dimensions collected from various manufacturing firms. Among the distribution functions, the unit beta distribution function is found to be the best fit using the chi-square test of fit. An attempt is made for the adoption of the unit beta model to x-bar charts of quality control in manufacturing. In this direction, upper and lower control limits (UCL and LCL) of x-bar control charts of dimension measurements are estimated for the beta model, and the observed differences between the beta and normal model control limits are discussed for the measurement sets.

• Journal of the Korean Society of Safety
• /
• v.13 no.1
• /
• pp.85-91
• /
• 1998

Sol-gel derived silica films were prepared by dip-coating onto polymethylmethacylate with Tetraethoxysilane(TEOS) as starting materials. Film properties such as viscosity and thickness were investigated as a function of dip speed, waterprecursor ratio, sol aging time. IR spectra of the gel films prepared from TEOS at various R are given. At small values of R the absorption peaks assignable to C-H vibration in $-OC_2H_5$ groups are observed around 3000 and 1500-1300 $cm^{-1}$. These bands indicate that the -$-OC_2H_5$ groups are retained in the gel at small values of R because of incomplete hydrolysis of TEOS. Film behaviour was interpreted in terms of the dependence of hydrolysis and condensation rates on the interplay between sol pH and waterprecursor ratio. Film thickness was found to increase by approximately a factor of two as waterprecursor ratio increased from two to six. Film thickness also increased with sol prepolymerization time. Surface quality was correlated with processing conditions.