• Journal of the Korea Society for Simulation
• /
• v.21 no.1
• /
• pp.55-68
• /
• 2012

Recently it is important to understand service supply chain because the economy moves from manufacturing to services. However, most of existing supply chain research focuses exclusively on the manufacturing sector. To overcome this situation, it needs to investigate and analyze service supply chain. Simulation is one of the most frequently used techniques for analysis and design of complex system. Service supply chain is complex and large systems that require an accurate designing phase. Especially, it is important to examine closely the dynamically interactive behavior of the different service supply chain components in order to predict the performance of the servcie supply chain. In this paper, we develop a conceptual model of service supply chain. Then, we present a new procedure to develop simulation model for the developed conceptual model of service supply chain, based on the UML analysis and design tools and on the ARENA simulation language. The two main characteristics of the proposed procedure are the definition of a systematic procedure to design service supply chain and of a set of rules for the conceptual model translation in an ARENA simulation language. The goal is to improve the knowledge on service supply chain management and support the simulation model development efficiency on service supply chain.

• Korean Journal of Social Welfare
• /
• v.63 no.1
• /
• pp.317-342
• /
• 2011

This study aims to find out the determinants of male police officers' investigative behavior(active investigation vs. secondary victimization) of sexual violence. For this purpose, a hypothetical model which explains the relationships among the 5 variables (knowledge of law about the investigative role, perception of the protective & connective role, prejudice against the sexual violence, active investigation, and secondary victimization) was developed. Using the data collected from 354 male police officers of 3 cities in Gyeongnam area, the hypothetical model was tested. For data analysis, a structural equation modeling was used, and the final model was found(CFI=0.947, IFI=0.948, RMSEA=0.048). As a result of analyzing the model, the followings were found: (1) Active investigation was increased by knowledge of law about the investigative role, and perception of the protective & connective role, while decreased by prejudice against the sexual violence. (2) Secondary victimization was decreased by knowledge of law about the investigative role. (3) Prejudice against the sexual violence mediate the effects of knowledge of law about the investigative role, and perception of the protective & connective role on active investigation. (4) Prejudice against the sexual violence was found to have no significant effect on secondary victimization. Based on the findings, multi-educational programs, protocols on investigation of sexual violence, professionalization of the police, and changes in investigation environment as well as a system of collaboration and cooperation between police officer and social worker were suggested as a way to increase active investigation and to decrease secondary victimization.

• 한국균학회소식:학술대회논문집
• /
• 2016.05a
• /
• pp.13-13
• /
• 2016

Insects constitute the largest and most diverse group of animals in the world. They also serve as the hosts or nutrient sources for an immense assemblage of pathogens, parasites, and predators. More than 700 fungal species from 100 genera have adopted an entomopathogenic lifestyle. Although entomopathogenic fungi were studied as only biocontrol agents against a variety of pests in various countries, it has been recently focused their additional roles in nature. They are antagonists to/against plant pathogens, endophytes, and possibly even plant growth promoting agents. The potential antimicrobial effect against fungal plant pathogens by an isolate of entomopathogenic fungi including Beauveria bassiana, Lecanicillium spp., and Isaria fumosorosea have been reported since late 1990s, but wasn't reported pathogenicity of the isolate against pests. Later, a Canadian Lecanicillium sp. isolate and L. longisporium isolated from Vertalec$^{(R)}$ showed simultaneous control effect against both aphid and cucumber powder mildew. Therefore, the antimicrobial activities of 342 fungi isolates collected from various regions and conditions in Korea were evaluated against plant pathogenic fungus Botrytis cinerea using dual culture technique on agar plate. As a result, 186 isolates (54.4%) shown the antifungal activity against B. cinerea. The culture filtrates of selected fungi completely suppressed the growth of the microorganisms, indicating that suppression was due to the presence of antimicrobial substances in the culture filtrate. Mode of action of these fungi against insect involves the attachment of conidia to the insect cuticle, followed by germination, cuticle penetration, and internal dissemination throughout the insect. During infection process, secreted enzymes, proteinous toxins, and/or secondary metabolites secreted by entomopathogenic fungi can be used to overcome the host immune system, modify host behavior, and defend host resources. Recently, secondary metabolites isolated from entomopathogenic fungi have been reported as potential bioactive substances. Generally, most of bioactive substances produced by entomopathogenic fungi have reported low molecular weight (lower than 1,000 g/mol) as peptide and, in contrast the high molecular weight fungal bioactive substances are rare. Most substances based on entomopathogenic fungi were shown antimicrobial activity with narrow control ranges. In our study we analyzed the antimicrobial substances having antagonistic effects to B. cinerea. Antimicrobial substances in our fungal culture filtrates showed high thermostability, high stability to proteolytic enzymes, and hydrophilicity and their molecular weights were differed from substance. In conclusion, entomopathogenic fungi showed pathogenicity against insect pests and culture filtrate of the fungi also shown to antimicrobial activity. In the future, we can use the entomopathogenic fungi and its secondary metabolites to control both insect pest control and plant pathogenic fungi simultaneously.

• Journal of Korea Water Resources Association
• /
• v.53 no.3
• /
• pp.181-191
• /
• 2020

In order to produce accurate initial condition of soil moisture for global Numerical Weather Prediction (NWP), spin-up experiment is carried out using Noah Land Surface Model (LSM). The model is run repeatedly through 10 years, under the atmospheric forcing condition of 2008-2017 until climatological land surface state is achieved. Spin-up time for the equilibrium condition of soil moisture exhibited large variability across Koppen-Geiger climate classification zone and soil layer. Top soil layer took the longgest time to equilibrate in polar region. From the second layer to the fourth layer, arid region equilibrated slower (7 years) than other regions. This result means that LSM reached to equilibrium condition within 10 year loop. Also, spin-up time indicated inverse correlation with near surface temperature and precipitation amount. Initialized from the equilibrium state, LSM was spun up to obtain land surface state in 2018. After 6 months from restarted run, LSM simulates soil moisture, skin temperature and evaportranspiration being similar land surface state in 2018. Based on the results, proposed LSM spin-up system could be used to produce proper initial soil moisture condition despite updates of physics or ancillaries for LSM coupled with NWP.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.242-248
• /
• 2007

For an optimal design of automotive electric system, it is important to have a reliable modeling tool to predict the charge-discharge behaviors of the automotive battery. In this work, a two-dimensional modeling was carried out to predict the charge-discharge behaviors of a 12-V automotive lead-acid battery. The model accounted for electrochemical kinetics and ionic mass transfer in a battery cell. In order to validate the modeling, modeling results were compared with the experimental data of the charge-discharge behaviors of a lead-acid battery. The discharge behaviors were measured with three different discharge rates of C/5, C/10, and C/20 at operating temperature of $25^{\circ}C$. The batteries were charged with constant current of 30A until the charging voltage reached to a predetermined value of 14.24 V and then the charging voltage was kept constant. The discharge and charge curves from the measurements and modeling were in good agreement. Based on the modeling, the distributions of the electrical potentials of the solid and solution phases, the porosity of the electrodes, and the current density within the electrodes as well as the acid concentration can be predicted as a function of charge and discharge time.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.26-32
• /
• 2009

The aim of this research was to prepare microparticulate systems based on poly (lactide-co-glycolide)(PLGA) for the local release of ipriflavone in order to reduce bone loss. We developed the IP loaded PLGA microspheres using relatively simple oil-in-water(O/W) solvent evaporation method. HPLC was used to perform the in vitro release test of IP and morphology of cell attached on the micro-spheres was investigated using SEM. Cytotoxicity was assayed by cell counting kit-8 (CCK-8) test. Osteogenic differential cells were analyzed by ALP activity. Through RT-PCR analysis, we observed osteocalcin, ALP, and Type I collagen mRNA expression. The release of IP in vitro was more prolonged over 42 days and IP/PLGA microspheres showed the improvement on the cell proliferation, ALP activity and RT-PCR comparing with control (only PLGA). This initial research will be used to direct future work involved in developing this composite injectable bone tissue engineering system.

• Journal of Internet Computing and Services
• /
• v.15 no.2
• /
• pp.109-127
• /
• 2014

This study is devised out of the recognition that the existing standardization-related research has not sufficiently examined the overall social environment where a standard is actually made and diffused and the roles of the actors and the changes in them in the complex social system where multiple stakeholders exist. Against this backdrop, this study purports to reconstruct the dynamic process of developing and standardizing an innovative technology through a socio-technical approach involved by multiple stakeholders with different interests in the context of a socio-technical institutional environment. The specific goals to achieve the purpose include first, inspecting the characteristics of the interactions between the human actors and between the human and non-human actors in the socio-technical network surrounding a standardization process. Second, the study aimed to observe the activities of the focal actor who led the standardization process and its changing role. To that end, it analyzed the dynamic features of the process of standardizing a HD 3DTV broadcasting technology that took place in South Korea based on the actor network theory. As for the analysis method, the researchers personally took part in the actor network involving the new technology to analyze the dynamic characteristics of the network, applying the qualitative research method of survey and in-depth interviews and exploring the overall dynamics of environment, behavior and technology observed over the course of the entire standardization process.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.546-555
• /
• 2019

The purpose of this study was to improve the performance of the bogie-type crematory, which is the mainstream of domestic crematory equipment. A field scale technology was investigated via increasing the volume by changing the shape of the furnace and reducing the cremation time and saving the energy usage through the optimization of burner combustion control. First, the optimized structural design through thermal flow analysis increases the volume of the main combustion chamber by about 70%, which increases the residence time of the combustion flue gas. A designed pilot crematory was then installed and the combustion behavior was tested under various operating conditions and the optimum operating plan was derived from for each furnace shape. Based on the results, the practically applicable crematory was designed and installed at Y crematorium in the P City. Optimal combustion conditions could be derived through operating the demonstration crematory furnace. The crematory time and fuel consumption could be minimized by increasing the energy efficiency by increasing the residence time of high temperature combustion flue gas. In other words, the crematory time and fuel consumption were 38 min and $21.8Nm^3$, respectively which were shortened by 44.1 and 54.4% lower than that of the existing crematory, respectively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.4
• /
• pp.28-36
• /
• 2021

It is known that buried rebars inside concrete structures are protected from corrosion due to passive layer. It is very important to delay the timing of corrosion or evaluate a detection of corrosion initiation for the purpose of cost-beneficiary service life of a structure. In this study, corrosion monitoring was performed on concrete specimens considering 3 levels of cover depth(60 mm, 45 mm, and 30 mm), W/C(water to cement) ratio(40.0%, 50.0%, and 60.0%) and chloride concentration(0.0%, 3.5%, and 7.0%). OCP(Open Circuit Potential) was measured using agar-based socket type sensors. The OCP measurement showed the consistent behavior where the potential was reduced in wet conditions and it was partially recovered in dry conditions. In the case of 30 mm of cover depth for most W/C ratio cases, the lowest OCP value was measured and rapid OCP recovery was evaluated in increasing cover depth from 30 mm to 45 mm, since cover depth was an effective protection against chloride ion ingress. As the chloride concentration increased, the effect on the cover depth tended to be more dominant than the that of W/C ratio. After additional monitoring and physical evaluation of chloride concentration after specimen dismantling, the proposed system can be improved with increasing reliability of the corrosion monitoring.

• Korean Journal of Psychosomatic Medicine
• /
• v.27 no.1
• /
• pp.13-24
• /
• 2019

Objectives : The goals of the study are how to establish the cohort systems for the children and adolescents victims with sexual abuse in Korea and to identify the risk and protective factors that influence mental health in child sexual abuse (CSA). This is initial assessment data based on the analysis of cohort variables for baseline evaluation of subjects. Methods : We constructed the cohort systems for CSA victims recruited by Seoul Sunflower Children Center, CSA victims protection center. The initial assessment data which consisted of demographic and psychological inventories of CSA victims and their parents/families, psychiatric diagnoses were the results of statistical analysis of 65 subjects under 19 years old for 3 years 7 months. Results : The initial data were followings : female participants, N=56; mean age, 11.6 (SD=4.5); the most sexual assault, molestation 71.8%; victims, family and acquaintance 87.1%; 61.5% of the subjects diagnosed with psychiatric disorder; 29.2% diagnosed with PTSD and 23.1% diagnosed with depression. Mean duration for abuse to report is 1.5 years. Mean score of IES-R-K, TSCYC-avoidant and CBCL-problematic behavior were increased above clinical cut-off. Conclusions : CSA victims tend to have high risks in mental health problem. The cohort study could provide the risk and protective factors of CSA in mental health, and construct the predictive model for mental illness in Korea.