• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.269-273
• /
• 1998

The failure of material structures or mechanical system is considered as a direct or indirect result of fatigue. In the design of mechanical structure for estimating of reliability, the prediction of failure life is the most important failure mode to be considered. However, because of a complicated behavior of fatigue in mechanical structure, the analysis of fatigue is in need of much researches on life prediction. This document presents a prediction of fatigue life of the SAPH45 steel, which is extensively for vehicle frame. The method using lethargy coefficient and stress distribution factor at pediction of fatigue life based on the consideration of the failure characteristics from the tensile test should be provided in this study.

• Journal of Information Technology Applications and Management
• /
• 제20권2호
• /
• pp.177-191
• /
• 2013

Social network has been expected to increase the value of social capital through online user interactions which remove geographical boundary. However, online users in social networks face challenges of assessing whether the anonymous user and his/her providing information are reliable or not because of limited experiences with a small number of users. Therefore. it is vital to provide a successful trust model which builds and maintains a web of trust. This study aims to propose a prediction method for the interpersonal trust which measures the level of trust about information provider in Facebook. To develop the prediction method. we first investigated behavioral research for trust in social science and extracted 5 antecedents of trust : lenience, ability, steadiness, intimacy, and similarity. Then we measured the antecedents from the history of interactive behavior and built prediction models using the two decision trees and a computational model. We also applied the proposed method to predict interpersonal trust between Facebook users and evaluated the prediction accuracy. The predicted trust metric has dynamic feature which can be adjusted over time according to the interaction between two users.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1990년도 PROCEEDINGS OF THE FIRST KOREA-JAPAN JOINT GEOTECHNICAL SEMINAR ON EXCAVATION and TUNNELING IN URBAN AREAS
• /
• pp.145-162
• /
• 1990

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.66-66
• /
• 2003

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1998년도 특별강연 및 춘계학술발표 개요집
• /
• pp.144-146
• /
• 1998

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.442-445
• /
• 2006

This paper presents an analytical prediction of nonlinear characteristics and behavior characteristics PSC structures with un-bonded tendon system. In this paper, a numerical model for un-bonded tendon is proposed based on the finite element method, which can represent straight or curved un-bonded tendon behavior. this model and time-dependent material model used to investigate the time-dependent behavior of un-bonded prestressed concrete structures. The accuracy and objectivity of the assessment process may be enhanced by the use of sophisticated nonlinear finite element analysis program. A computer program, named RCAHEST(Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of concrete structures and steel plate was used. The material nonlinearities are taken into account by comprising the tension, compression, and shear models of cracked concrete and models for reinforcements and tendons in the concrete. The smeared crack approach is incorporated. It accounts for the aging, creep and shrinkage of concrete and the stress relaxation of prestressed steel. The proposed un-bonded tendon model and numerical method of un-bonded prestressed concrete structures is verified by comparison with reliable experimental results.

• Preventive Nutrition and Food Science
• /
• 제14권3호
• /
• pp.246-251
• /
• 2009

The partitioning behavior of five printing ink solvents was studied in cookie ingredients and cookies to examine migration behavior, and to determine if one could predict Kp of a cookie from summing the Kp of each ingredient multiplied by its weight factor in the cookie formula. Solvents were ethyl acetate, hexane, isopropanol, methyl ethyl ketone, and toluene. Gas chromatography was used to measure Kp values on each raw and baked ($260^{\circ}C$ for 10 min) cookie ingredients, and lab-made cookies. The baking process-decreases in water content in each sample generally affected Kp of polar solvents, but did not affect that of the non-polar solvents. Structural changes in cookie ingredients during the baking process also caused some change of migration behavior. While the prediction of Kp of lab-made cookies using the Kp of raw ingredients showed significant differences between calculated and experimentally found values, predictions with baked ingredients showed much smaller differences. This suggests that loss of water and changes of crystallinity in cookies and cookie ingredients due to the baking process are important and affect the Kp.

• 한국강구조학회 논문집
• /
• 제8권3호통권28호
• /
• pp.127-137
• /
• 1996

Connections as basic elements and an integrated part of a steel frame has an effect on the frame's performance. Conventional analysis and design techniques are based on either idealized fixed or pinned conditions. In fact, the use of rigid or pinned connection model in steel frame analysis serves the purpose of simplifying the analysis and design processes, but all connections used in current pratice possess stiffness and transfer moment which fall between the extreme cases of fully rigid and ideally pinned. To predict the behavior of the semi-rigid steel frames, it is necessary to predict the moment-rotation behavior of the beam-to-column connections. In this research, prediction equation for moment-rotation behavior of the beam-to-column connection is suggested and the effect of design parameters has investigated. Prediction model, in a nondimensional form shows the moment-rotation characteristic for connections. It is composed of the curve fitting power function using standardization constant K and 4 parameter $KM_o$, ${\theta}_0$, b, n based on the pretest result about moment-rotation behavior of connection.

• 한국지반공학회지:지반
• /
• 제10권1호
• /
• pp.103-118
• /
• 1994

세주응력을 서로 독립적으로 조절할 수 있는 입방체형삼축시험기를 이용하여 모래시료에 대한 일련의 배수삼축시험이 실시되었다. 그리고 Lade에 의해 제안된 등방단일경화구성모델을 사용하여 입방체형삼축시험시와 동일한 응력경로에 대한 응력-변형률 거동을 해석하였다. 등방단일경화구성모델에 의한 거동 예측치는 초기재하단계(primary loading)시 입방체형삼축시험결과와 좋은 일치를 보이고 있는 것으로 나타났다. 그러나 반복재하단계(unloading과 reloading)의 경우 거동예측치는 시험결과와 많은 차이를 보이고 있다. 이것은 등방단일경화구성모델의 소성일경화계수가 시험결과의 경화부분을 근거로 하여 결정되었기 때문에 연화부분에서 많은 오차가 있는 것으로 판단된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.76-82
• /
• 2002

In this study, the rotary bending fatigue test was carried out with low carbon steel(SM25C). The specimens were heat-treated in order to change the grain size, and investigated items are fatigue limit, small crack initiation, fatigue crack propagation behavior and possibility of fatigue life prediction according to the different grain size. The summarized result are as follows ; Fatigue limit of the smooth specimen was dependent upon the grain size. The fatigue crack initiation of the small grain size specimen was delayed more than that of the large grain size specimen. And the small cracks of small grain size specimen were distributed in the narrow region of the main crack circumference contrary to the large grain size specimen. The main crack was grown along the grain boundary having co-alliance with small cracks. The experiment material has quantitatively disclosed the possibility of fatigue life prediction because the fatigue crack propagation behavior is dependent upon the grain size.