• Journal of the Korean GEO-environmental Society
• /
• v.7 no.5
• /
• pp.5-11
• /
• 2006

A primary factor affecting on the design of soft ground is to determine the soil properties (Compression index, Coefficient of consolidation) and the depth of soft ground. It could be the basic sources to estimate settlement behavior of soft ground. Even though the reliable soil examination equipment was used to examine soil to determine the depth of soft ground, it's very hard to find out the accurate properties of soft ground, because the condition of indoor experiment cannot reproduce the circumstances of ground perfectly. Therefore, this study was re-estimated to find out the most reliable soil properties by using back-analysis with field monitoring data of "Site preparation for Airplane Mooring of Incheon International Airport Phase II Development" for 317days.

• Korean journal of applied entomology
• /
• v.33 no.4
• /
• pp.250-256
• /
• 1994

Flight behavior of Mntsucoccus thunbergianae males and their response to the synthetic sex pheromone, (6R.lOR)-matsuone, were studied in Pinus thunbergiana forests More males were flying around the tree crown than near the ground. A dispenser loaded w~th 50 vg of the pheromone appeared to affect the density of male flights less than 10 meters Sticky traps with 50 pg of the pheromone attracted flylng males, but those with 1 pg were not effectwe in a forest wlth high crown closure, more males were tmpped at upper crown level than near the ground whereas males appeared to be more responsive to pheromone near the ground in a forest with low crown closure Monitoring new scale iniestations with pheromone mps was much more effective than egg sac surveys, the customary detecting procedures Maiing disruption was not achieved by placing 32 mg of pheromone m a space of l X l X l meter.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.9
• /
• pp.1787-1794
• /
• 2002

TiNi alloy fiber was used to solve the problem of the tensile residual stress as the reinforced material. TiNi alloy fiber improves the tensile strength of composite by occurring compressive residual stress in the matrix using shape memory effect. In order to generate compressive residual stress in TiNi/Al6061 shape memory alloy(SMA) composite, 1, 3 and 5% pre-strains were applied to the composite in advance. It was also evaluated the effect of compressive residual stress corresponding to the pre-strain variation and the volume fraction of TiNi alloy. AE technique was used to clarify the microscopic damage behavior at high temperature and the effect of pre-strain in TiNi/Al6061 SMA composite. The results of the microscopic damage evaluation of TiNi/Al6061 SMA composite under various pre-strain using AE technique can be divided into three stage corresponding to the AE signals. AE counts and events were useful parameters to evaluate the fracture mechanism according to the variation of pre-strain. In addition, two dimensional AE source location technique was applied for monitoring the crack initiation and propagation in composite.

• Korean Parent-Child Health Journal
• /
• v.1
• /
• pp.56-74
• /
• 1998

The language of the newborn, like that of adults, is one of gesture, posture, and expression(Lewis, 1980). Helping parents understand and respond to their newborn's cues will make caring for their baby more enjoyable and may well provide the foundation for a communicative bond that will last lifetime. Infant state provides a dynamic pattern reflecting the full behavioral repertoire of the healthy infant(Brazelton, 1973, 1984). States are organized in a predictable emporal sequence and provide a basic classification of conditions that occur over and over again(Wolff, 1987). They are recognized by characteristic behavioral patterns, physiological changes, and infants' level of responsiveness. Most inportantly, however, states provide caregivers a framework for observing and understanding infants' behavior. When parents know how to determine whether their infant is sleep, awake, or drowsy, and they know the implications, recognition of states has for both the infant's behavior and for their caregiving, then a lot of hings about taking care of a newborn become much easier and more rewarding. Most parents have the skills and desire to do what is best for their infant. The skills 7373parents bring to the interaction are: the ability to read their infant's cues: to stimulate the baby through touch, movement, talking, and looking at: and to respond in a contingent manner to the infant's signals. Among the crucial skills infants bring to the interaction are perceptual abilities: hearing and seeing, the capacity to look at another for a period of time, the ability to smile, be consoled, adapt their body to holding or movement, and be regular and predictable in responding. Research demonstrates that the absence of these skills by either partner adversely affects parent-infant interaction and later development. Observing early parent-infant interactions during the hospital stay is important in order to identify parent-infant pairs in need of continued monitoring(Barnard, et al., 1989).

• Korean Journal of Agricultural Science
• /
• v.43 no.2
• /
• pp.194-204
• /
• 2016

The pear psylla, Cacopsylla pyricola, is a very small sap-feeding insect of many commercial pear varieties that could be considered the most serious insect pest of pear. Detailed information on plant penetration activities of the pear psylla is essential to study its feeding behavior used to evaluate resistant traits to chemical control. The application of the electrical penetration graph technique (EPG) could provide a relevant insight into the nature of this resistance. EPG waveforms of C. pyricola were characterized on the basis of amplitude, frequency, voltage level, and electrical origin. Feeding behaviors of C. pyricola were recorded and analyzed by EPG analysis. During EPG monitoring, waveform PA occurred at the start of stylet penetration of pear leaf epidermal cell. Waveform PB followed, in which stylet secreted saliva was observed. Waveforms PC1 and PC2 involved penetrating and sucking behaviors in parenchyma cells and vascular parenchyma, respectively. In addition, waveform PC1 represented salivation into bundle sheath cells and ingestion from parenchyma. Otherwise, behaviors of salivation into phloem and ingestion from phloem produced waveforms PE1 and PE2, respectively. On the other hand, ingestion from xylem tissues showed waveform PG. Among the feeding patterns of C. pyricola described above, phloem feeding patterns occurred most frequently, followed by xylem feeding and parenchyma penetration patterns in descending order.

• Korean journal of applied entomology
• /
• v.39 no.2
• /
• pp.105-110
• /
• 2000

Sex pheromone composition was analyzed for Dichocrocis punctiferalis, which attacksapple, peach, chestnut fruits, etc., and its behavioral and field trapping studies were conducted to developa monitoring system with its sex pheromone. Virgin females showed maximum mating behavior andhairpencil extrusion behavior between 4-5 hrs after lights-off under 16L18D photoperiod and 26rf 1 "C.During this period, two sex pheromone components, ElO-hexadecenal and ZlO-hexadecenal, weredetected by GC analysis in the hexane extract of abdominal tips of virgin females. The best attraction ofmales to various synthetic sex pheromone blends was obtained at the 70 : 30 ratio of ElO-hexadecenal andZ10-hexadecenal for hair pencil extrusion and at the 80 : 20 ratio for flying upwind response. The highestattractiveness in fields was obtained between 70 : 30 and 80 : 20 from several tests in apple, peach andchestnut orchards.and chestnut orchards.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.4
• /
• pp.93-100
• /
• 2002

The current from the feed motor of a machine tool contains substantial information about the machining state. There have been many researches that investigated the current as a measure for the cutting farces. However it has been reported that this indirect measurement of the cutting farces from the feed motor current is only feasible in low frequency. In this research, it was presented that the bandwidth of the current monitoring can be expanded to 130 Hz. And the unusual behavior of the current was examined in this bandwidth. The cross-feed directional cutting force influences the machined surface of the workpiece, which makes it necessary to estimate this force to control the roughness of the machined sulfate. The current exists in the stationary feed motor, and it can give the useful information on the quality of the machined surface. But the unpredictable behavior of the current prevents applying the current to prediction of the cutting state. Empirical approach was conducted to resolve the problem. As a result, the current was shown to be related to the accumulation of the accumulation of the infinitesimal rotation of the motor. rotation of the motor. Subsequently the relationship between the current and the cutting force was identified.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.9
• /
• pp.29-36
• /
• 2018

Several studies have been conducted on monitoring system and automatic measuring instruments to prevent slope failure in advance in Korea and overseas. However, these studies have quite complex structure. Since most of the measurement systems are installed on the slope surface, the researches are carried on the measurement system that detects sign of slope collapse in advance and alerts are still unsatisfactory. In this study, slope collapse experiments were carried out to understand the slope failure mechanism according to rainfall conditions. The water content and displacement behavior at the early stage of the slope failure were analyzed through the measurement of the ground displacement and water content. The results of this study can be used by local government as a basic data for the design of slope failure alarm system to evacuate residents in case of slope failure or landslide due to heavy rainfall.

• Korean Journal of Adult Nursing
• /
• v.18 no.4
• /
• pp.543-552
• /
• 2006

Purpose: The purpose of this descriptive study was to investigate the pattern of physical restraints used in ICUs and to identify influencing factors of application and removal of restraints. Method: The subjects of this study were 90 restrained patients out of 215 patients over 6 years old who were admitted to 6 ICUs in SMC during a 2 weeks period. The data was collected through a questionnaire of characteristics, guidelines and nursing care of restraint uses. The data were analyzed by non-parametric statistic with the use of the SAS program. Results: The restraints were applied to 31.4% of subjects. Mean time of physical restraint was $36.76{\pm}55.7$ hours. There were significant difference with mean time and frequency according to duty shift. GCS, restless behavior and discomfort factors, medical devices, and life sustaining devices had significant relation with application of restraints. In addition, the mean time of restraints used were related significantly with GCS, restless behavior, and discomfort factors. Conclusion: The used of restraints were dependent on mainly the nurses' decision. Thus ICU nurses have to develop the guidelines to applying restraints and removal of restraints in regard to patients rights and ethics. Continuous monitoring and evaluation of application of the restraints is essential in professional nursing.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.23-32
• /
• 2011

U-health services have been progressed as treatment and management for specific diseases and prevention services for providing the behavior management to customers according to the increase in chronic patients. The conventional U-health services provide required services and bio-information monitoring only through remote diagnoses and counsels and that represent limitations in preventing and managing metabolic syndrome patients like chronic patients. Thus, in this study a multi platform based U-health service model for managing the health of chronic patients is proposed. The multi-platform based U-health service model can provide continuous health information, diet, and exercise services regardless of the location of customers through PCs and smart phones. In addition, it is able to provide prescription services to doctors and nurses using a CDS (Clinical Decision Support) module based on clinical information. Doctors can identify the life pattern of patients through a behavior modification program and provide customized services to patients. The U-health service model provides effective services in multi-platform environments to customers and that will improve the health of chronic patients.