• Laser Solutions
• /
• v.5 no.1
• /
• pp.23-31
• /
• 2002

The uniform metal droplet generation using Nd-YAG laser was studied and experiment was carried out. The shape and volume of developed droplet was measured and the Young-Laplace equation and equilibrium condition of force were applied this model. The differential equation predicting shape of droplet using equilibrium condition of force instead of Navier-stokes equation was induced and numerical solution of differential equation compared with experimentation data. The differential equation was solved by Runge-Kutta method. Surface tension coefficient of droplet was determined with numerical solution relate to experimental result under the statical condition. In case of dynamic vibration, metal droplet shape and detaching critical volume are predicted by recalculating proposed model. The result revealed that this model could reasonably describe the behavior of molten metal droplet on vibration.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.9
• /
• pp.567-569
• /
• 2005

NARX(Nonlinear AutoRegressive with eXogenous input) neural network was used for prediction of nuclear reactor behavior which was influenced by control rods in short-term period and also by the concentration of xenon and boron in long-term period in load following operations. The developed model was designed to predict reactor power, xenon worth and axial offset with different burnup states when control rods and boron were adjusted in load following operations. Data of the Korea Next Generation PWR were collected by ONED94 code. The test results presented exhibit the capability of the NARX neural network model to capture the long term and short term dynamics of the reactor core and the developed model seems to be utilized as a handy tool for the use of a plant simulation.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.49-58
• /
• 2004

The first and perhaps the most critical and perhaps the most important step in the process of predicting future traffic volume in a region (Zone) is to estimate the number of trips generated in from each traffic analysis zone. Most trip generation models for urban transportation planning, and highway in Korea are regression models. In Korea the category analysis has not been tried for last decades since the proper data such as the household travel behavior data have not been collected. Recently, the comprehensive household travel behavior survey such as ${\ulcorner}$1996 The Household Travel Behavior Survey${\lrcorner}$, ${\ulcorner}$2002 The Household Travel Behavior Survey${\lrcorner}$ has been done. In this paper, the cross-classification tables of Seoul Metropolitan Area including the City of Seoul and Kyonggi Province are estimated by the category analysis. The tables are compared with regression models and ${\ulcorner}$2002 The Household Travel Behavior Survey${\lrcorner}$ data in terms of predictive capabilities in Seoul Metropolitan Area. Improvement strategies for trip generation forecast in Seoul Metropolitan Area are proposed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.637-642
• /
• 1996

This paper presents the analysis results for the core degradation processes and the fission product release of the PHEBUS FPT0 experiment using MELCOR1.8.3. The objective of this study is to assess models associated with the core damage and fission product behavior in MELCOR. The calculation results were much improved through sensitivity studies. Thermal/hydraulic behavior in the core and the circuit was well predicted under the intact core geometry. In non-eutectic model case. the UO$_2$ dissolution model in the MELCOR always showed such a tendency that the resulting dissolved UO$_2$ mass was small at the highly oxidized condition due to the model logic. Total H$_2$ generation mass was underpredicted because the stiffner was not modeled and the liner in the shroud was not allowed to be oxidized in MELCOR. Some difficulties were found in modeling the activation product were solved by manipulating the RN input associated with the initial fission product inventory. These problem were occurred because there are no control rod model in MELCOR. Generally the fission product release ratio showed a similar trend compared with the measured data except the activation product. which have no model to simulate in MELCOR.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.16-22
• /
• 2017

In order to reduce costs of electricity energy at periods of peak demand, there has been an exponential interest in Demand Response (DR). This paper discusses the effect on the participants' behavior in response to DR. Under the assumption of perfect competition, the equilibrium point of the electricity market with DR is derived by modeling a DR curve, which is suitable for microeconomic analysis. Cournot model is used to analyze the electricity market of imperfect competition that includes strategic behavior of the generation companies. Strategic behavior with DR makes it harder to compute equilibrium point due to the non-differential function of payoff distribution. This paper presents a solution method for achieving the equilibrium point using the best response function of the strategic players. The effect of DR on the electricity market is illustrated using a test system.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.12
• /
• pp.151-156
• /
• 2000

A vibration in a high-speed machine may lead to machinery malfunction and even catastrophic failure. So solving the vibration problem is a fundamental requirement for the stability of the high-speed machine. The flywheel energy storage system using superconducting magnetic bearings is a device to store electrical energy as rotational kinetic energy by motor and to convert it to electrical by generator when necessary. The high-speed rotating flywheel has large amplitude at a critical speed. And it has an unstable behavior by the electric torque at the first stage of the energy generation. In this paper, the stability analysis is performed with an analytical model and equations of motion-which is considered the effect of the electric torque-to identify the stable driving condition and the dynamic behavior.

• 한국전산유체공학회:학술대회논문집
• /
• 1997.10a
• /
• pp.120-125
• /
• 1997

In the present work the influence of various physical parameters on the two-phase flow behavior in a self-heated porous medium has been studied using a numerical model, that is, the effects of heat generation rate, of porosity, of particle size, and of system pressure on the dryout process. To analyze the effect of these parameters, the variation of both liquid volumetric fraction (i.e., liquid saturation) and liquid axial velocity is evaluated at the steady state or at the onset of a first boiled-out region. The analysis of computational results indicate that a qualitative tendency exists between the parameters such as heat generation rate, porosity, effective particle diameter and the temporal development of the liquid volumetric fraction field up to dryout. In addition to these parameters, a variation of fluid properties such as phase density, phase viscosity due to a change of system pressure can be used for gaining insight into the nature of two-phase flow behavior up to dryout.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1509-1516
• /
• 2022

This paper presents a method to generate a model of the code implementation for UML state diagrams. First, it promotes the states of a state machine into objects, and then it structures the behavior model on the mechanism of a state diagram based on State design pattern. Then, it establishes the rules of generating the code implementation, and using the rules, the Java code mode is generated for the implementations of State Diagrams in Java syntax grammar. In addition, Structuring the information of the code model is necessary for generating Java code automatically. The meta information is composed of Meta-Class Model and Meta-Behavior Model, on which we could construct the automatic code generating engine for UML State Diagrams. The implementation model generation method presented in this paper could be used as a stand-alone engine, or included and integrated as a module in the UML tools.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.575-586
• /
• 2008

The main objective of this paper is to develop an improved model for the analysis of liquefaction potential and to predict excess pore pressure (EPP) using the proposed model that can simulate behavior of saturated sand under earthquake loading conditions. The damage concept is adopted for the development of the proposed model. For the development of the model, a general formulation based on experimental results and damage potential using cumulative absolute velocity (CAV) is proposed for a more realistic description of dynamic responses of saturated sand. Undrained dynamic triaxial tests are conducted using earthquake loading conditions. Based on test results, the NCER-NCW function in terms of $w_d$ and CAV is developed. Procedure for the evaluation of EPP and determination of model parameters for the proposed model is presented as well. For the determination of initial liquefaction, the minimum curvature method using the NCS-NCW curve is proposed. It is observed that predicted initial liquefaction using the proposed method agrees well with measured initial liquefaction. From results of additional undrained dynamic triaxial tests, it is seen that predicted EPP generation using the proposed model agrees well with measured results for earthquake loading cases.

• The Korean Journal of Franchise Management
• /
• v.13 no.1
• /
• pp.47-57
• /
• 2022

Purpose: Recently, it is common to see cases where an amount similar to the cost of a meal is spent on dessert, or an amount greater than the cost of a meal is spent on dessert. The generation MZ is showing a tendency of 'value consumption' by consuming values and beliefs in consideration of the recent impact on society and the environment. Therefore, this study aims to analyze the effect of dessert cafe quality and eco-friendly behavior on customer trust and loyalty targeting the generation MZ who have visited desert cafés. This study examined the mediating role of customer trust in the relationships between desert café quality, eco-friendly behavior and customer loyalty, and also the moderating effect of and eco-friendly behavior on customer trust and customer loyalty. Research design, data, and methodology: To achieve purposes of this study, 229 data were collected from respondents who visited desert café and analyzed using measurement model (reliability test and correlation analysis), Fornell-Larcker Criterion and Heterotrait-Monotrait Ratio (HTMT) assessment, and structural equation model (PLS-SEM) with SPSS 22.0 and SmartPLS 3.3.7. Results: The research results are as follows. First, desert cafes' quality positively influenced customer trust but did not customer loyalty. Second, desert cafes' eco-friendly behavior positively influenced customer trust and customer loyalty. Fourth, the interaction term of dessert cafe quality and eco-friendly behavior did not influence customer trust and customer loyalty. Conclusions: This study emphasized the necessity of service quality and eco-friendly behavior of dessert cafes by examining the relationship between the quality of dessert cafes and eco-friendly behaviors, customer trust and loyalty. It also found the importance of the role of trust in securing loyal customers. In order to secure and retain loyal customers, the owners of dessert cafes should make effortsto improve the quality of the cafes' products and services so that customers can feel a sense of trust, and actively publicize that they are practicing eco-friendly management. As a result of this study, it is intended to provide practical implications for the management of dessert cafes by understand ing the effects of product and service quality and eco-friendly behaviors of companies to bakery industry workers and start-ups.