• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.3
• /
• pp.185-192
• /
• 2023

In this study, fluctuating wind velocity for time history analysis is simulated by a single variate, single-dimensional random process using the KBC2022 spectrum about across-wind direction. This study analyzed and obtained the inelastic dynamic response for structures modeled as a single-degree-of-freedom system. It is assumed that the wind response is excellent in the primary mode, the change in vibration owing to plasticization is minor, along-wind vibration and across-wind vibration are independent, and the effect of torsional vibration is small. The numerical results, obtained by the Newmark-𝛽 method, shows the time-history responses and trends of maximum displacements. As a result of analyzing the inelastic dynamic response of the structure with the second stiffness ratio(𝛼) and yield displacement ratio (𝛽) as variables, it is identified that as the yield displacement ratio (𝛽) increases when the second stiffness ratio is constant, the maximum displacement ratio decreases, then reaches a minimum value, and then increases. When the stiffness ratio is greater than 0.5, there is a yield point ratio at which the maximum displacement ratio is less than 1, indicating that the maximum deformation is reduced compared to the elastically designed building even if the inelastic behavior is permitted in the inelastic wind design.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.23-27
• /
• 2024

In this study, the time-dependent warpage behavior caused by the viscoelastic properties of prepreg in a printed circuit board (PCB) was analyzed by finite element method (FEM). The accurate viscoelastic properties of the prepreg were measured by stress relaxation test, which were then incorporated into constructed warpage analysis model. When the PCB was subjected to repeated thermal cycles, the warpage of the PCB was restored to its initial state when only the elastic properties of the prepreg were considered, but when the viscoelastic properties were also considered, the warpage was not restored and permanent warpage change occurred. The warpage analysis for three different types of prepreg was conducted to compare their mechanical reliability, and the results showed that materials with elastic properties dominating over viscoelastic properties experienced less warpage, resulting in better mechanical reliability.

• Journal of Internet Computing and Services
• /
• v.17 no.4
• /
• pp.35-42
• /
• 2016

Recently many researches have been focused on the use of the markerless augmented reality system using face, foot, and hand of user's body to alleviate many disadvantages of the marker based augmented reality system. In addition, most existing augmented reality systems have been utilized rigid objects since they just desire to insert and to basic interaction with virtual object in the augmented reality system. In this paper, unlike restricted marker based augmented reality system with rigid objects that is based in display, we designed and implemented the markerless augmented reality system using deformable objects to apply various fields for interactive situations with a user. Generally, deformable objects can be implemented with mass-spring modeling and the finite element modeling. Mass-spring model can provide a real time simulation and finite element model can achieve more accurate simulation result in physical and mathematical view. In this paper, the proposed markerless augmented reality system utilize the mass-spring model using tetraheadron structure to provide real-time simulation result. To provide plausible simulated interaction result with deformable objects, the proposed method detects and tracks users hand with Kinect SDK and calculates the external force which is applied to the object on hand based on the position change of hand. Based on these force, 4th order Runge-Kutta Integration is applied to compute the next position of the deformable object. In addition, to prevent the generation of excessive external force by hand movement that can provide the natural behavior of deformable object, we set up the threshold value and applied this value when the hand movement is over this threshold. Each experimental test has been repeated 5 times and we analyzed the experimental result based on the computational cost of simulation. We believe that the proposed markerless augmented reality system with deformable objects can overcome the weakness of traditional marker based augmented reality system with rigid object that are not suitable to apply to other various fields including healthcare and education area.

• Korean Journal of School Psychology
• /
• v.16 no.3
• /
• pp.231-263
• /
• 2019

The purpose of this study was to verify the effects of growth orientation, life satisfaction, perceived stress, positive psychological capital and interpersonal relationships in the group coaching program for the promotion of growth orientation for university students based on the model of the social-cognitive approach to motivation. The program consisted of eight topics: growth orientation, growth mindset and brain plasticity, self-directed goal setting, talent which is a product of ongoing effort, failure attitude and perspective change, positive emotion, thinking and behavior, value of growth orientation and self-coaching, respectively. The program comprised a total of eight sessions, 120 minutes each, and the final program was completed through a preliminary experiment with three university students. In order to verify the effectiveness of the program, 48 university students were divided into 16 in the experimental group, 16 in the comparative group, and 16 in the control group. The experimental group participated in the group coaching program to enhance the growth orientation based on the model of the social-cognitive approach to motivation developed in this study, the comparative group participated in a learning goal orientation improvement program based on an incremental implicit theory, and the control group did not carry out any program. Three groups were tested in pre, post, follow-up1(after 1 month) and follow-up2(after 3 months) in order to growth orientation, life satisfaction, perceived stress, positive psychological capital and interpersonal relationships. We performed analysis to confirm the homogeneity to the data of the three groups and to verify the interaction effects between times and groups. As a result, it was confirmed that the group coaching program to promote growth orientation, life satisfaction, perceived stress, positive psychological capital and interpersonal relationships had statistically significant effect and was more effective than the comparative program due to the larger effective size. Also, we confirmed that the coaching effect was sustained after the program was finished and more effectively maintained than the comparative program. Based on the results of this study, this study has academic implications because it verify the effectiveness of the group coaching for the promotion of the growth orientation by scient ic method.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.1
• /
• pp.59-78
• /
• 2024

In tunnel construction, the stability is evaluated by the settlement of adjacent structures and ground, but the shear strain of the ground is the main factor that determines the failure mechanism of the ground due to the tunnel excavation and the change of the operating load, and can be used to review the stability of the tunnel excavation and to calculate the reinforcement area. In this study, a twin tunnel excavation was simulated on a soft ground in an urban area through a laboratory model test to analyze the behavior of the twin tunnel excavation on the adjacent pile grouped foundation and adjacent ground. Both the displacement and the shear strain of ground were obtained using a close-range photogrammetry during laboratory model test. In addition, two-dimensional finite element numerical analysis was performed based on the model test. The results of a back-analysis showed that the maximum shear strain rate tends to decrease as the horizontal distance between the pillars of the twin tunnel and the vertical distance between the toe of the pile group and the crown of the tunnel were decreased. The impact of the second tunnel on the first tunnel and pile group was decreased as the horizontal distance between the pillars of the twin tunnel was increased. In addition, the vertical distance between the toe of the pile group and the crown of the tunnel had a relatively greater impact on the shear strain results than the horizontal distance of the pillars between the twin tunnels. According to the results of the close-range photogrammetry and numerical analysis, the settlement of adjacent pile group and adjacent ground was measured within the design criteria, but the shear strain of the ground was judged to be outside the range of small strain in all cases and required reinforcement.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.2
• /
• pp.31-54
• /
• 2007

The exchange between buyers and sellers in the industrial market is changing from short-term to long-term relationships. Long-term relationships are governed mainly by formal contracts or informal agreements, but many scholars are now asserting that controlling relationship by using formal contracts under environmental dynamism is inappropriate. In this case, partners will depend on each other's flexibility or interdependence. The former, flexibility, provides a general frame of reference, order, and standards against which to guide and assess appropriate behavior in dynamic and ambiguous situations, thus motivating the value-oriented performance goals shared between partners. It is based on social sacrifices, which can potentially minimize any opportunistic behaviors. The later, interdependence, means that each firm possesses a high level of dependence in an dynamic channel relationship. When interdependence is high in magnitude and symmetric, each firm enjoys a high level of power and the bonds between the firms should be reasonably strong. Strong shared power is likely to promote commitment because of the common interests, attention, and support found in such channel relationships. This study deals with environmental dynamism in high-tech industry. Firms in the high-tech industry regard it as a key success factor to successfully cope with environmental changes. However, due to the lack of studies dealing with environmental dynamism and supply chain commitment in the high-tech industry, it is very difficult to find effective strategies to cope with them. This paper presents the results of an empirical study on the relationship between environmental dynamism and supply chain commitment in the high-tech industry. We examined the effects of consumer, competitor, and technological dynamism on supply chain commitment. Additionally, we examined the moderating effects of flexibility and dependence of supply chains. This study was confined to the type of high-tech industry which has the characteristics of rapid technology change and short product lifecycle. Flexibility among the firms of this industry, having the characteristic of hard and fast growth, is more important here than among any other industry. Thus, a variety of environmental dynamism can affect a supply chain relationship. The industries targeted industries were electronic parts, metal product, computer, electric machine, automobile, and medical precision manufacturing industries. Data was collected as follows. During the survey, the researchers managed to obtain the list of parts suppliers of 2 companies, N and L, with an international competitiveness in the mobile phone manufacturing industry; and of the suppliers in a business relationship with S company, a semiconductor manufacturing company. They were asked to respond to the survey via telephone and e-mail. During the two month period of February-April 2006, we were able to collect data from 44 companies. The respondents were restricted to direct dealing authorities and subcontractor company (the supplier) staff with at least three months of dealing experience with a manufacture (an industrial material buyer). The measurement validation procedures included scale reliability; discriminant and convergent validity were used to validate measures. Also, the reliability measurements traditionally employed, such as the Cronbach's alpha, were used. All the reliabilities were greater than.70. A series of exploratory factor analyses was conducted. We conducted confirmatory factor analyses to assess the validity of our measurements. A series of chi-square difference tests were conducted so that the discriminant validity could be ensured. For each pair, we estimated two models-an unconstrained model and a constrained model-and compared the two model fits. All these tests supported discriminant validity. Also, all items loaded significantly on their respective constructs, providing support for convergent validity. We then examined composite reliability and average variance extracted (AVE). The composite reliability of each construct was greater than.70. The AVE of each construct was greater than.50. According to the multiple regression analysis, customer dynamism had a negative effect and competitor dynamism had a positive effect on a supplier's commitment. In addition, flexibility and dependence had significant moderating effects on customer and competitor dynamism. On the other hand, all hypotheses about technological dynamism had no significant effects on commitment. In other words, technological dynamism had no direct effect on supplier's commitment and was not moderated by the flexibility and dependence of the supply chain. This study makes its contribution in the point of view that this is a rare study on environmental dynamism and supply chain commitment in the field of high-tech industry. Especially, this study verified the effects of three sectors of environmental dynamism on supplier's commitment. Also, it empirically tested how the effects were moderated by flexibility and dependence. The results showed that flexibility and interdependence had a role to strengthen supplier's commitment under environmental dynamism in high-tech industry. Thus relationship managers in high-tech industry should make supply chain relationship flexible and interdependent. The limitations of the study are as follows; First, about the research setting, the study was conducted with high-tech industry, in which the direction of the change in the power balance of supply chain dyads is usually determined by manufacturers. So we have a difficulty with generalization. We need to control the power structure between partners in a future study. Secondly, about flexibility, we treated it throughout the paper as positive, but it can also be negative, i.e. violating an agreement or moving, but in the wrong direction, etc. Therefore we need to investigate the multi-dimensionality of flexibility in future research.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.397-405
• /
• 2021

With the recent phenomenon of the Intelligence Information Society, the cyber security paradigm has begun to change. In particular, the increase of the interconnectedness of the hyperlinked society has extended the scope of damage that can be caused by cyber threats to the real world. In addition to that, it can also be a risk to any given individual who could accompany a crisis that has to do with public safety or national security. Adolescents who are digital natives are more likely to be exposed to cyber threats, which is mainly due to the fact that they are significantly more involved in cyber activities and they also possess insufficient security comprehension and safety awareness. Therefore, it is necessary to strengthen cyber security capabilities of every young individual, so that they can effectively protect themselves against cyber threats and better manage their cyber activities. It examines the changes of the security paradigm and the necessity for cyber security education, which is in direct accordance to the characteristics of a connected society that further suggests directions and a basic system of cyber security education, through a detailed analysis of the current state of Domestic and Overseas Cyber Security Education. The purpose of this study was to define cybersecurity competencies that are necessary within an intelligent information society, and to propose a regular curriculum for strengthening cybersecurity competencies, through the comparison and meticulous analysis of both domestic and overseas educational systems that are pertinent to cybersecurity competencies. Accordingly, a cybersecurity competency system was constructed, by reflecting C3-Matrix, which is a cyber competency system model of digital citizens. The cybersecurity competency system consists of cyber ethics awareness, cyber ethics behavior, cyber security and cyber safety. In addition to this, based on the basic framework of the cybersecurity competency system, the relevant education that is currently being implemented in the United States, Australia, Japan and Korea were all compared and analyzed. From the insight gained through the analysis, the domestic curriculum was finally presented. The main objective of this new unified understanding, was to create a comprehensive and effective cyber security competency curriculum.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.2
• /
• pp.197-211
• /
• 2011

Objectives : OHIP-14 and EQ-5D were used, targeting the residents of farming communities to identify the elements that influence oral cavity's health and quality of life due to health and to identify the importance of oral cavity's health in order to increase health of adults' oral cavity and quality of life via improved health. Methods : This research was conducted from July 17th, 2010 to August 16th, 2010 targeting 600 residents in Goryeong-gun, Gyeongsangbuk-do, aging over 40. The data has been analyzed using Mann-Whitney U test, Kruskal-Wallis test and hierarchical multiple regression through SPSS Win Program 18.0 version. Results : 1. OHIP-14 and EQ-5D based on general characteristics showed lower oral health-related quality of life and health-related quality of life on the following cases: women (p=0.004, p<0.001), older (p<0.001, p<0.001), lower scholastic ability (p<0.001, p<0.001), lower average of average spending money (p<0.001, p<0.001), higher number of chronic disease (p<0.001, p<0.001), less drinking (p=0.012, p=0.008), lower perceived oral health and health status (p<0.001, p<0.001) and non smoking showed only EQ-5D (p<0.001). 2. OHIP-14 and EQ-5D based on oral health behavior showed lower oral health-related quality of life and health-related quality of life on the following cases: no periodic oral check-up (p<0.001, p<0.001), less experience of oral health education (p<0.001, p<0.001), horizontal tooth-brushing method(p<0.001, p<0.001) and lower frequency of tooth-brushing showed only OHIP-14 (p=0.042). OHIP-14 and EQ-5D based on oral health status and subjective oral symptom showed lower oral health-related quality of life and health-related quality of life on following cases: number of existing tooth less than 20 (p<0.001, p<0.001), the number of missing teeth more than 9 (p<0.001, p=0.044), DMFT (Decay, Missing, Filling Teeth) index more than 18 (p<0.001, p<0.001), wears denture (p<0.001, p<0.001), edentulous (p<0.001, p=0.002), have xerostomia (p<0.001, p<0.001) and have chewing discomfort (p<0.001, p<0.001). 3. Factors affecting OHIP-14 were gender, age, perceived oral health status, perceived health status, number of existing teeth, dental status, xerostomia and chewing discomfort, and the of reliability (how well it explains) the final model was 48.7%. EQ-5D showed relevance on gender, age, presence of chronic disease, perceived health status, xerostomia, chewing discomfort and oral health-related quality of life, and the reliability of the final model was 42.9%. Conclusions : In order to improve the quality of life of ruralists, oral health needs to be improved or remained by increasing the rate of possession of the existing teeth and preventing the loss of teeth. In order to do so, improvement of accessibility of dental clinic, change of direction from treatment-centered to prevention-centered health care system, development of oral health education program and various oral health care policies which would vitalize continuous oral health care system are considered to be necessary.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.4
• /
• pp.233-252
• /
• 2021

This paper is a study to improve the efficiency of mixing technology in the shield TBM chamber. Currently, the number of construction cases using the TBM method is increasing in Korea. According to the increasing use of TBM method, research on TBM method such as Disc Cutter, Cutter bit, and Segment also shows an increasing trend. However, there is little research on the mixing efficiency in chamber and chamber. In order to improve the smooth soil treatment and the behavior of the excavated soil, a study was conducted on the change of the mixing efficiency according to the effective mixing bar arrangement in the chamber. In the scale model experiment, the ground was composed using plastic materials of different colors for ease of identification. In addition, the mixing bar arrangement was different and classified into 4 cases, and the particle size distribution was classified into single particle size and multiple particle size, and the experiment was conducted with a total of 8 cases. The rotation speed of the cutter head of all cases was the same as 5 RPM, and the experiment time was also carried out in the same condition, 1 minute and 30 seconds. In order to check the mixing efficiency, samples at the upper, middle (left or right), and lower positions of each case were collected and analyzed. As a result of the scaled-down model experiment, the mixing efficiency of Case 4 and Case 4-1 increased compared to Case 1 and Case 1-1, which are actually used. Accordingly, it is expected that the mixing efficiency can be increased by changing the arrangement of the mixing bar in the chamber, and it is considered to be effective in saving air as the mixing efficiency increases. Therefore, this study is considered to be an important indicator for the use of shield TBM in Korea.

• Journal of Nutrition and Health
• /
• v.55 no.1
• /
• pp.174-187
• /
• 2022

Purpose: This study was performed to evaluate an education program for housewives to reduce sodium intake based on the social cognitive theory. Methods: Housewives (n = 387) received 2 education sessions focused on food purchase and cooking, and completed a questionnaire on their perceptions of environmental, cognitive, and behavioral factors and the stages of behavioral change to reducing sodium intake both before and after the education program. Results: After the education program, the recognition of social efforts for sodium reduction and sodium labeling and experience with low-sodium products increased. Positive expectancies for the prevention of osteoporosis by the reduction of sodium were enhanced while the main barriers in practicing sodium reduction decreased, especially 'interrupting social relationships when dining with others', 'bad taste', 'preference for soup or stew', and 'limited knowledge and skills to practice'. In addition, cognition and nutrition knowledge related to reducing sodium intake were improved on all scores, but the effect on self-efficacy and dietary behavior was limited to only a few items. The percentage of participants in the pre-action stage (including pre-contemplation, contemplation, and preparation stages) for reducing sodium intake decreased from 43.2% before education to 21.5% after education, while that in the action stage increased from 19.6% before education to 43.5% after education (p < 0.001). The education program had the most significant impact on participants who were in the pre-action stage and showed improved scores in all sections. Conclusion: These results suggest that a customized education program for housewives could be an effective tool to reduce sodium intake by improving personal expectancies, cognition, and nutrition knowledge regarding sodium reduction and enabling a greater section of the population to move to the action stage of reducing sodium intake.