• 한국분무공학회지
• /
• 제16권4호
• /
• pp.201-209
• /
• 2011

Optimum engine performance is obtained when the spray characteristics is well matched to the geometry of a combustion chamber. Among many parameters governing the combustion performance in internal combustion engine, fuel supply characteristics and atomization are important performance factors. Therefore, spray characteristics of high pressure multi-hole injector has been studied experimentally. An experimental test system has been made to operate high pressure injection system and to visualize spray behavior. Spray visualization has been performed to analyze spray formation, spray cone angle, bent angle and penetration length. Spray interaction with piston has been analyzed with various injector installation angle, injection pressure and ambient pressure. Test results show that penetration length is greatly influenced by the injection pressure. Penetration length is decreased as ambient pressure increased. Spray cone angle is increased as injection pressure and ambient pressure increased. However, bent angle is not influenced by the change of injection pressure and ambient pressure. Spray cone angle distribution map is plotted using the experimental data. Fuel movement around the spark-plug has been enforced as increasing injector installation angle.

• 대한원격탐사학회지
• /
• 제30권1호
• /
• pp.127-136
• /
• 2014

낙동강은 하구의 수문 개방 시 연간 수천 톤의 쓰레기가 남해로 유입되어 인근 연안을 이동하며 사회 경제적 피해를 유발하고 있다. 이에 본 연구에서 낙동강 유출 부유쓰레기의 거동 특성을 파악하기 위해 2012년 장마, 태풍 내습 시를 대상으로 피해지로 추정되는 거제도 북동측 해안 1개소에 대한 조사와 부이를 활용한 이동 경로 추적 시험을 수행하였다. 또한, 해양기상 환경에 대한 분석을 통해 부유쓰레기의 이동과 관련된 흐름을 파악하였다. 연구 결과 장마 시기인 7월 16일 초목류를 비롯한 총 40톤 정도의 쓰레기가 흥남해수욕장으로 유입되었다. 또한 9월 14일 태풍 '산바' 내습 시기에 투하된 위치 추적 부이는 가덕도 남쪽 해상을 지나 1 ~ 2일 후 거제도 해안가로 유입되는 결과를 보여주었다. 부유쓰레기와 위치 추적 부이가 거제도 북동측 해안가로 유입될 당시 거제 해역에서 북동풍계열의 풍향이 지배적이었으며 연안으로 유입되는 공통적인 해수 표층 흐름이 나타났다.

• 한국실내디자인학회논문집
• /
• 제20권2호
• /
• pp.64-71
• /
• 2011

There are a method to analyze reactions or psychological condition and a method to observe visitor's behavioral reaction as methods to measure and evaluate humans' recognition behavior reaction of humans. The measure of the eye movement as a method to living body's reaction and psychological condition has an advantage to measure the information acceptance reaction of view recognition of the stimulus of view composition factors which has been used since a long time ago in other research areas, but almost not studies have been made on the exhibition views in museums. Therefore, on the premise of such recognition, this study aimed at obtaining various types of information through vision angles of visitor in exhibition space of an museum and judging space information, at measuring the condition of information acceptance through attention experiments and observation investigation of and finding out the disposition and characteristics so as to verify the relationship between the exhibition space and exhibition Method.

• 한국농공학회지
• /
• 제44권2호
• /
• pp.81-98
• /
• 2002

The condition of initial movement far the river bank protection using rip rap is a limit condition beyond which the lining is progressively destroyed as the separate elements are removed by the flow. In the case of the river bank protection using gabion mattress, however, after the initial movement the containment offered by the mesh remains. A new situation of equilibrium with a deformed river bank protection using gabion mattress is obtained, allowing it to withstand more severe conditions without compromising the resistance and without further deformation. Shield's coefficient for the river bank protection using gabion mattress is twice the value of that fur river bank protection using rip rap. This means that with the same hydraulic behavior conditions, the average dimension of the rocks to be used in the river bank protection using gabion mattress is half that of river bank protection using rip rap rock. When the same size rocks are used the allowable velocity for the river bank protection using gabion mattress is more than twice, even as much as 3 or 4 times that for river bank protection using rip rap.

• 한국정보통신학회논문지
• /
• 제12권5호
• /
• pp.843-848
• /
• 2008

얼굴 검출은 대부분 얼굴의 움직임 정보를 이용한다. 기존에 얼굴 검출 방법은 프레임간의 차를 이용하여 움직임을 검출하는 방법이 사용되어 왔으나 대부분이 실시간을 고려하지 않은 수학적 접근법을 사용하거나 알고리즘이 지나치게 복잡하여 실시간 구현에 용이하지 않았다. 본 논문에서는 실시간 얼굴검출을 위하여 감시카메라에서 입력된 RGB 영상을 YCbCr 영상으로 변환한 후 연속된 두 영상의 차를 구하고 Glassfire 라벨링을 실시했다. 라벨링 결과 가장 넓은 구역의 면적과 Area 임계치 값을 비교하여 임계값 이상의 면적이면 동작변환으로 인식하고 영상을 추출하였다. 이렇게 추출된 동작변환 영상을 대상으로 얼굴 검출을 실시하였다. 얼굴 검출에 필요한 특징을 추출하기 위해 AdaBoost 알고리즘을 사용하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권1호
• /
• pp.87-97
• /
• 2014

In this study, the model tests were conducted on the short piles installed in sands under a horizontal pullout load to investigate their behavior characteristics. From the horizontal loading tests where dimensions of the pile diameter and length, and loading point were varied, the horizontal pullout resistance and the rotational and translational movement pattern of the pile were investigated. As a result, the horizontal pullout resistance of the pile embedded in sands was dependent on the pile length, diameter, loading point, etc. The ultimate horizontal pullout load tended to increase as the loading point (h/L) moved to the bottom from the top of the pile, regardless of the ratio between the pile length and diameter (L/D), reached the maximum value at the point of h/L = 0.75, and decreased afterwards. When the horizontal pullout load acted on the upper part above the middle of the pile, the pile rotated clockwise and moved to the pullout direction, and the pivot point of the pile was located at 150-360mm depth below the ground surface. On the other hand, when the horizontal pullout load acted on the lower part of the pile, the pile rotated counterclockwise and travelled horizontally, and the rotational angle was very small.

• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.191-201
• /
• 2019

Finite element analysis is one of the most used tools for studying femoral neck fracture. Nerveless, consensus concerning either the choice of material characteristics, damage law and /or geometric models (linear on nonlinear) remains unreached. In this work, we propose a numerical quasi-brittle damage model to describe the behavior of the proximal femur associated with two methods to evaluate the Young modulus. Eight proximal femur finite elements models were constructed from CT scan data (4 donors: 3 women; 1 man). The numerical computations showed a good agreement between the numerical curves (load - displacement) and the experimental ones. A very encouraging result is obtained when a comparison is made between the computed fracture loads and the experimental ones ($R^2=0.825$, Relative error =6.49%). All specific numerical computation provided very fair qualitative matches with the fracture patterns for the sideway fall simulation. Finally, the comparative study based on 32 simulations adopting linear and nonlinear meshing led to the conclusion that the quantitatively results are improved when a nonlinear mesh is used.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.121-127
• /
• 2007

Muscle force produced by muscle fibers is transmitted to bones via tendinous structures(aponeuroses and tendon), resulting in joint(s) movement. As force-transmitting elements, mechanical behavior of aponeuroses and tendon are closely related with the function of muscle-tendon complex. The purpose of this study was to determine strain characteristics of aponeuroses for in-vivo human soleus muscle during submaximal voluntary contractions using an advanced medical imaging technique, velocity-encoded phase-contrast magnetic resonance imaging (VE-PC MRI). VE-PC MRI of the soleus muscle-tendon complex was acquired during submaximal isometric plantarflexion contraction-relaxation cycle (n = 7), using 3.0T Trio MRI scanner(Siemens AG, Malvern, MA). From the VE-PC MRI containing the tissue velocity in superior-inferior direction, twenty regions of interest(20 ROI; 10 on the anterior aponeurosis and 10 on the posterior aponeurosis) were tracked. During the isometric plantarflexion contraction-relaxation cycle, velocity and displacement profiles were different between the anterior and posterior aponeuroses, indicating heterogeneous strain behavior along the length of the leg. The anterior aponeurosis elongated while the posterior aponeurosis shortened during the initial phase of the contraction. Moreover, strain behavior of the posterior aponeurosis was different from that of the Achilles tendon. Possible explanation for the observed variations in strain behavior of aponeuroses was investigated with morphological assessment of the soleus muscle and it was found that the intramuscular tendinous structures significantly vary among subjects. In conclusion, the heterogeneous mechanical behavior of the soleus aponeuroses and the Achilles tendon suggests that the complexity of skeletal muscle-tendon complex should be taken into consideration when modeling the complex for better understanding of its functions.

• 한국지반환경공학회 논문집
• /
• 제11권12호
• /
• pp.27-35
• /
• 2010

지하공간에 설치되는 구조물 중 지하수위 아래에 위치하는 부분은 상향으로 정수압인 부력이 작용하게 된다. 최근 큰 규모의 중요구조물 즉, 부력이 크게 발생하는 구조물은 공사비가 고가이나 안전율을 확실하게 증가시키는 방법인 부력저항 영구앵커를 많이 적용하고 있는 실정이다. 그러나, 부력저항 영구앵커의 저항 메커니즘 규명은 미흡한 실정이다. 특히, 시공 후 앵커의 장기거동에 대한 규명은 계측 관리의 어려움으로 이루어지지 않고 있는 것이 현실이다. 본 연구에서는 부력 저항 영구앵커의 설계 시 합리적인 구조물 거동 평가를 위하여 앵커두부에 하중계를 설치하여 앵커축력을 자동화계측 및 수동계측을 통해 시공초기부터 10년간 계측 분석하였으며, 이를 토대로 건물의 자중증가에 따른 앵커의 시공단계별 거동과 시간 경과에 따른 앵커의 장기거동(시공 후 10년 이내의 거동)을 분석하였다.

• 디지털융복합연구
• /
• 제16권4호
• /
• pp.371-378
• /
• 2018

본 연구에서는 노인장기요양기관 입소노인의 가족관계가 시설적응에 미치는 영향을 파악하는데 연구의 목적이 있다. 장기요양기관을 평가등급과 지역에 따른 할당표본을 통한 표집틀을 구성하여, 2018년 1월과 2월에 한 기관 당 입소노인 5~6명을 대상으로 설문조사를 하였으며, 최종적으로 381명의 데이터를 분석에 사용하였다. 주된 연구결과는 첫째, 노인의 시설적응수준은 높은 편이었다. '집단행동부적응'과 '이동쇼크'와 같이 부적응차원은 2점대로 낮고, '새로운 거주지 인정'과 '친구 만들기'와 같은 적응차원은 중간수준 이상을 보이고 있다. 둘째, 노인의 시설적응에는 노인의 사회인구학적 특성이나 시설관련변수의 영향력보다는 가족관계변수의 영향력이 더 컸다. 그 중에서 가족과의 친밀감 변화 변수의 영향력이 가장 컸다. 따라서 노인이 시설에 입소하기 전부터 입소 후까지 전 과정에 걸쳐 가족과의 친밀감이 유지되도록 적극적인 지원과 노력이 필요하다는 점을 제안한다.