• 디자인학연구
• /
• 제20권
• /
• pp.211-217
• /
• 1997

천연염색은 인공염료로 인한 환경오염으로부터 자연을 보호하고, 천연 염색된 섬유는 해충으로 인한 인체의 피해를 막아주어 의복, 침구 류로 개발 가능하며, 또한 색상도 중간계열이 많아 자연스런 이미지를 연출 할 수 있다. 본 연구는 값싸고, 쉽게 구할 수 있는 천연염색 재료를 다양한 색상으로 개발 할 수 있어 고부가가치를 지닌 제품 생산으로 유휴농지의 활용과 함께 농가의 수익을 올릴 수 있다. 전라남도 무안 지방에서 대량으로 생산되는 양파껍질을 다양한 섬유에 염색하여 노랑 색에서 연갈색, 회색계열까지 여러 가지의 색상이 추출된다. 이렇게 염색된 섬유의 세탁, 마찰, 물, 땀, 일광 견뢰 도 측정을 통해 실험하였더니 그 결과 견뢰 도가 전체적으로 우수하여 천연 산업 염색재료로서의 가능성을 발견하였다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2000년도 학술발표대회논문집
• /
• pp.91-95
• /
• 2000

With 106 detached houses where the aged people live alone, this study was conducted to perform a location survey of their residential environment. The result of this study is summarized as follows: While the surveyed houses' safety, sanitation and convenience appeared to be positive, with respect to the conditions of location, 73％ of the surveyed houses did not meet the requirement for comfort. The average area of each space indicated that the bedding room was 12.05$m^2$, the living room 14.71$m^2$, the kitchen 9.06$m^2$, the bathing room 4.05$m^2$, and the rest room 2.59$m^2$. Then, 93.3％ of the bedding rooms had the doorsill. Also, 97.2％ of the surveyed houses had retrievable space. The form of their living room door showed a hinged door(54.5％) and a sliding door(45.5％) which were similar with each other. The finished material was that wood accounted for 42.6％ which was highest. The cooking table form of kitchen was mainly "\ulcorner"-shaped(49.5％) and "\ulcorner"-shaped(48.5％) which were highest, and their average height appeared to be 815mm. The fuel used for kitchen was that gas accounted for 93.3％, while 95.2％ of the surveyed houses was not equipped with any gas-warning device. 75.5％ had an integrated type of bath room and toilet. In addition, the stepped difference between the bath room and other space was that 70.8％ had the difference, but they had no a satisfactory sliding-prevention device(Not for 91.6％) or heating system(Not for 92.9％).stem(Not for 92.9％).

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권2호
• /
• pp.278-282
• /
• 2004

Compost is used mainly as an organic fertilizer, but it is also used as bedding material for cattle. Dairy cattle have been identified as a main reservoir of pathogenic Escherichia coli O157:H7. Further, E. coli is regarded as an environmental pathogen that causes bovine clinical mastitis. Hence, its growth in compost spread or compost bedding should be avoided. Physical and chemical conditions, available nutrients and microflora in compost change greatly during the composting process. Since pathogen growth in compost seems to be related to these changes, we assessed the possibility of E. coli growth in compost samples collected at 0, 7, 13, 22, 41, 190 and 360 d. Cattle waste composts with and without added tofu residue were collected from static piles and immediately air-dried. Compost samples were inoculated with a pure culture of E. coli, the moisture content was adjusted to 50%, and the samples were incubated for 5 d at $30^{\circ}C$. The numbers of E. coli in compost before and after incubation were determined by direct plating on Chromocult coliform agar. Almost all compost samples supported E. coli growth. Samples collected during or immediately after the thermophilic phase (day 7) showed the highest growth. Growth in samples more than 13 d old were not significantly different from those of aged compost samples. The addition of tofu residue gave a higher growth than its absence in younger samples collected prior to 13 d. To minimize the risk of environmental mastitis, the use of compost in the initial stage of the process is better avoided.

• 한국의류학회지
• /
• 제1권1호
• /
• pp.25-29
• /
• 1977

The warmth retentivity of natural and syntheic waddings as bedding stuff, and further, the machanism of heat transmission through conduction, radiation and convection were analysed. The materials used were cotton, silk, and wool as natural waddings, and polyamide, polyester, regular acrylic, conjugate acrylic, regular polyprepylene and conjugate polypropylene as synthetic waddings. The results of this study are as follow: 1. The warmth retentivity is highest in silk. Following silk in descending order is cotton, conjugate acrylic, polyester, regular acrylic, wool, polyamide, conjugate polypropylene and regular polypropylene. There is not any significant relationship between warmth retentivity and the conductivity of the fibers. 2. Transmission by radiation through the fiber waddings is highest in conjugate polypropylene. Following conjugate polypropylene in descending order is regular polypropylene. polyester. polyamide, conjugate acrylic, regular acrylic, wool, cotton, and silk. This is seen to be in nearly reversed order to the abovementioned order of warmth retentivity. In this respect, warmth retentivity with loose fibreous material as in the case of bedding stuff is primarily affected by the interceptive function of the fibers in heat radiation. 3. Warmth retentivity becomes lower with increasing air content of the waddings. This is because heat transmission by radiation incrases as air content increases. The air content increase is due to the fact that the air is unable to intercept heat radiation. In addition, heat transmission accelates in proportion to the increase in convection as the air gap enlarges.

• Journal of Animal Science and Technology
• /
• 제55권1호
• /
• pp.67-74
• /
• 2013

우사바닥깔짚으로부터의 온실가스 배출량을 산정하기 위해 깔짚으로의 분뇨부하량을 정확히 조절할 수 있는 모의우사바닥에서의 깔짚두께별 $CH_4$와 $N_2O$ 가스 발생량을 조사하였다. 톱밥이 10, 15cm 높이로 깔린 $0.2583m^2$(L 0.63 m${\times}$W 0.41 m) 크기의 우사바닥으로의 한우와 젖소의 분뇨부하는 친환경 축사표준모델의 축사면적과 축종별 일일 분뇨배설량 자료를 기준으로 한우는 $1.586kg/m^2/d$, 젖소는 $3.588kg/m^2/d$로 정하고 24시간 주기로 분뇨를 투입/혼합하면서 깔짚으로부터 발생하는 온실가스 발생량을 조사하였다. 총 12개의 모의우사바닥을 이용하여 모든 실험은 3반복으로 3회에 걸쳐 수행되었다(5~7월, 9~11월, 2~4월). 그 결과 단위면적당 $CH_4$ 발생량은 한우, 젖소 모두에서 깔짚이 두꺼운 경우 적게 발생하는 경향을 보였으나 통계적으로 유의적인 차이가 없었으며(p<0.05), $N_2O$ 발생량의 경우에도 깔짚두께에 따른 차이가 없는 것으로 나타났다. 한우와 젖소를 비교할 때 단위면적당 온실가스 발생량은 젖소가 $CH_4$는 약 7.5배, $N_2O$는 약 1.2배 많았으며 연간 배출되는 $CH_4$는 한우 7.4 g/head/year, 젖소 130.4 g/head/year로 젖소가 한우에 비해 21배 높은 것으로 나타났다. 또한 $N_2O$는 한우 3,267 g/head/year, 젖소 14,719 g/head/year로 젖소가 약 4.5 배 많았으나 배설된 N 대비 $N_2O$-N은 한우 0.2148 kg $N_2O$-N/kg N, 젖소 0.1632 kg $N_2O$-N/kg N으로 오히려 한우가 높았으며 IPCC 2006 GL값 0.07 kg $N_2O$-N/kg N과 비교시 한우는 약 3.07배, 젖소는 약 2.33배 높은 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1750-1756
• /
• 2011

After Kyoto Protocol was adopted for green gas reduction, each nations are stepping up efforts to reduce $CO_2$ of a typical green gas. Construction industry also is trying $CO_2$ reduction with the techniques of two types which are software and hardware techniques. The software technique are Passive Design considered green gas emission and the environment impact assessment by LCA. The hardware techniques are adjustment of equipment system and development of eco- friendly material. But, it is nonexistent that a study related to $CO_2$ emission considered detail process in construction industry. This study analyzed the relativeness of equipment combination and $CO_2$ emission by calculate $CO_2$ emission follow to equipment combination on earth-work which is the process emitted most $CO_2$ among railway bedding construction.

• 한국의상디자인학회지
• /
• 제12권4호
• /
• pp.173-182
• /
• 2010

In this study, textile designs were developed by applying Norigae for motives, were digital-printed for it's eco-friendly, delicate and short printing time and as final products, necktie, bag and bedding was developed with them. The purposes of this study were to develop a unique textile design, and then to enhance the competitiveness of Korean textile industry in the world market and pass down a Korean traditional fiber art cultural legacy. The results are as follows Norigaes are a sort of Korean traditional ornaments worn on women's Korean traditional costume. These can vary in color, material, shape, composition and said to have very high artistic value from the standpoint of the modern view. And these are symbols of happiness and women's longing of Korean traditional society. So Norigaes are worthy of applying Korean traditional motive for modern textile design. The textile designs applied a Norigae in this study were estimated comparatively high.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 가을 학술발표회 논문집
• /
• pp.161-184
• /
• 2001

Rock masses usually contain such features as bedding planes, faults, fissures, fractures, joints and other mechanical defects which, although formed from a wide range of geological processes, posses the common characteristics of low shear strength, negligible tensile strength and high fluid conductivity compared with the surrounding rock material. In the engineering context here, the discontinuities can be the single most important factor governing the deformability, strength and permeability of the rock mass. Moreover, a particularly large and persistent discontinuity could critically affect the stability of any surface or underground excavation. For these reasons, it is necessary to develop a thorough understanding of the geometrical, mechanical and hydrological properties of discontinuities and the way in which these will affect rock mechanics and hence rock engineering.

• 화약ㆍ발파
• /
• 제16권2호
• /
• pp.23-33
• /
• 1998

본 연구는 현재 시공중에 있는 성주터널에 사용될 Rock Bolt의 설계 기준을 작성하는데 목적을 두었다. 이 성주터널의 개설은 본 구역의 암질이 연약하기 때문에 NATM(New Austrian Tunnelling method)으로 시공하는 것으로 가정하였으며 본 공법에서 소약되는 Rock Blot의 길이와 간격 등의 설계 기준을 작성하엿다. 그 결과 다음과 같은 결론을 얻었다. 1) 터널 주어암석을 조립사암, 상립사암, 사귀하암 그리고 silty세일은 보통암이고 흑색세이로가 그레이와케(Greywacke) 그리고 설암으로 확인되었다. 2) 본 터널에 사용할 Rock Blot의 길이를 3~4m의 것을 활용할때에 Blot의 간격은 사암에는 최소 1.3m에서 최대 1.8로, 혈암에는 최소 1.3m에서 최대 2.0m이다. 그리고, 그레이와케(Grey-wake)의 경우는 공히 1.5m로 설계되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.713-720
• /
• 2000

The directional response of strength and deformation on the rocks acting by external loads is called by strength and deformability anisotropy, respectively. Peak strength and its failure criteria of anisotro rocks have been studied and reported. Many authors have investigated in detail the behavior of triaxial peak strength of anisotropic rocks(Jaeger 1960, McLamore & Gray 1967, Hoek & Brown 1980, Ramamurthy & Rao 1985). They concluded that the triaxial strength of anisotropic rocks varies according to the inclination of discontinuity in specimens. And, the minimun triaxial strength occurs in the specmen with 60° of inclination angle ; and specimens with 0° or 90° inclination have maximum triaxial strength. Based on the experimental result, the behavior triaxial strength is investigated. The triaxial compression tests due to the angle bedding plane have been conducted and the material constants, 'm' and 's', cohesion and angle of friction and nonlinear strength parameters to fit for the failure criterion were derived from the regression analysis. And, the experimental date are employed to examine three existing failure criteria for peak strength, provided by Jaeger, McLamore and Hoek & Brown and Ramamurthy & Rao. For a shale, the suitability of the failure criteiria of triaxial peak strength for anisotropic rocks is discussed.