• Korean Journal of Environmental Biology
• /
• v.35 no.4
• /
• pp.662-669
• /
• 2017

This study evaluated the ecotoxicological properties of livestock waste water treated by a LID (Low Impact Development) system, using a mixture of bio-reeds and bio-ceramics as suitable bed media for a subsequent treatment process of a livestock wastewater treatment plant. The relationship between the pollutant reduction rate and the ecotoxicity was analyzed with the effluents from the inlet pilot plant, with vegetated swale and wetlands and the batch type of an infiltration trench. Each pilot plant consisted of a bio process using bio-reeds and bio-ceramics as bed media, as well as a general process using general reeds and a bed as a control group. The results indicated that, after applying the HRT 24 hour LID method, the ecotoxicity was considerably lowered and the batch type pilot plant was shown to be effective for toxicity reduction. The LID method is expected to be effective for water quality management, considering ecotoxicity by not only as a nonpoint source pollution abatement facility but also, as a subsequent treatment process linked with a livestock manure purification facility. It is necessary to take the LID technic optimization study further to apply it as a subsequent process for livestock wastewater treatment.

• Korean Journal of Environment and Ecology
• /
• v.26 no.3
• /
• pp.437-445
• /
• 2012

The study performed the implementation monitoring of the revegetation methods applied to the test-bed of Simgok Stream in Incheon to identify the effect of water level and inundation period on the vegetation coverage of the stream bank revegetation methods. The categories of monitoring included the plant species and plant coverage for each method, physicochemical property of soil, water level and water quality. The result of monitoring revealed that plant growth conditions of all revegetation methods of each stream bank were good in the first survey as of May 2010. However, in the second survey of June 2011 when inundation period was less than a week, plant growth conditions and coverage of revegetation methods were partially bad. In the third survey as of August 2011 when inundation period was longest as 8 weeks during survey period, most vegetations did not survive except for Phragmites communis. But plant species number and plant coverage were increased gradually in the forth survey as of October 2011 when inundation period was less than 2 weeks so water level decreased more than that of third survey. Accordingly, the correlation analysis among number of plant species and plant coverage on stream bank, which applied revegetation method, water level and inundation period was performed for quantitative analysis. The result revealed that number of plant species and plant coverage has a negative correlation with water level and inundation period, but inundation period had higher correlation with plant occurrence than water level.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.02a
• /
• pp.165-170
• /
• 2000

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.2
• /
• pp.12-19
• /
• 2010

This study was carried out to explore the availability of seedling pots made from paper mill sludge using red pepper species called Nokkwang. The seedling pots were made by several conditions such as different mixing ratios between sludge and old newspaper (ONP), sterilizing treatment and latex coating. After 30 day cultivation in a green house, the growth condition of the red peppers was evaluated by comparison with those raised in the plastics seedling pots. The red peppers in the plastics pot showed a better growth than those in the sludge pots. Sterilizing treatment, latex coating and different mixing ratios between paper sludges and ONP did rarely affect a growth rate of the plant and the contents of inorganic elements. However, latex coating contributed to protection of physical structure of the sludge pots in spite of constant water feeding. Even though some inorganic elements from the sludge pots migrated into the bed soils, electronic conductivity of the bed soils was within the proper range for the plant growth. Finally it was confirmed that the seedling pots made from paper mill sludges could be used to cultivate horticultural plants as the alternative to the plastics pots.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.94-98
• /
• 1982

To understand the growth pattern of ginseng plant under shading, the vertical distribution of leaf area, leaf area index (LAI) and specific leaf weight (SLW) and changes in light intensity as affected by planting position were investigated in 3 to 5 years old ginseng plant populations. Light intensity was vertically lowest at about 10cm above the ground and became low at the rear planting position in 3-year-old population. When culturing bed (96cm in width) were divided into three parts at intervals of 32cm from front to rear, the leaf area in 3-year-old population was largest in middle 1/3 part of planting bed. Light intensity affected the SLW positively, but LAI showed no distinct difference among planting positions. The light environment of 4-year-old population was worse than that of 3-year-old population and leaf area and LAI differed greatly among planting positions. In 5-year-old population, leaf dry weight and leaf area of furrow part (that is, the amount of leaves protruded from the plants which were planted in 1st, 2nd or 3rd lines into the furrow) increased. The dry weights of leaves and stem increased considerably as plant became aged, and were distributed mainly in upper layer.

• Journal of Ginseng Research
• /
• v.39 no.1
• /
• pp.81-88
• /
• 2015

Background: In Changbai Mountains, Panax ginseng (ginseng) was cultivated in a mixture of the humus and albic horizons of albic luvisol in a raised garden with plastic shade. This study aimed to evaluate the impact of ginseng planting on soil characteristics. Methods: The mixed-bed soils were seasonally collected at intervals of 0-5 cm, 5-10 cm, and 10-15 cm for different-aged ginsengs. Soil physico-chemical characteristics were studied using general methods. Aluminum was extracted from the soil solids with $NH_4Cl $(exchangeable Al) and Na-pyrophosphate (organic Al) and was measured with an atomic absorption spectrophotometer. Results: A remarkable decrease in the pH, concentrations of exchangeable calcium, $NH_4^+$, total organic carbon (TOC), and organic Al, as well as a pronounced increase in the bulk density were observed in the different-aged ginseng soils from one spring to the next. The decrease in pH in the ginseng soils was positively correlated with the $NH_4^+$ (r=0.463, p<0.01), exchangeable calcium (r=0.325, p<0.01) and TOC (r= 0.292, p < 0.05) concentrations. The $NO_3^-$ showed remarkable surface accumulation (0-5 cm) in the summer and even more in the autumn but declined considerably the next spring. The exchangeable Al fluctuated from $0.10mg\;g^{-1}$ to $0.50mg\;g^{-1}$ for dry soils, which was positively correlated with the $NO_3^-$ (r=0.401, p < 0.01) and negatively correlated with the TOC (r=-0.329, p < 0.05). The Al saturation varied from 10% to 41% and was higher in the summer and autumn, especially in the 0-5 cmand 5-10 cm layers. Conclusion: Taken together, our study revealed a seasonal shift in soil characteristics in ginseng beds with plastic shade.

• Particle and aerosol research
• /
• v.9 no.4
• /
• pp.239-246
• /
• 2013

The purpose of this study is to determine the feasibility of dry-type desulfurization process for actual application to coal-fired power plant. We used actual exhaust gas from Facility Y, Plant #2 to fabricate a demo-scale testing device to attempt to improve the efficiency of desulfurization. A spout-bed circulating dry scrubber convergence system connecting turbo reactor with bag filter was devised, then analyzed for performance characteristics of $SO_2$ removal for Ca/S mole ratio, superficial gas velocity, and ammonia injection, and for secondary reaction characteristics of the non-reactive sorbent at the bag filter. As a result, the installation of spout-bed circulating dry scrubber convergence system showed better economy and efficiency for removing sulfur than the existing wet/semidry-type desulfurization process. In addition, the best efficiency for desulfurization occurred when connected to the bag filter, with differential pressure maintained at 150 $mmH_2O$.

• Carbon letters
• /
• v.15 no.3
• /
• pp.198-202
• /
• 2014

Amorphous agglomerates of carbon nanospheres (CNS) with a diameter range of 10-50 nm were synthesized using the solution combustion method. High-resolution transmission electron microscopy (HRTEM) revealed a densely packed high surface area of $SP^2$-hybridized carbon; however, there were no crystalline structural components, as can be seen from the scanning electron microscopy, HRTEM, X-ray diffraction, Raman spectroscopy, and thermal gravimetric analyses. Electrochemical and thermo catalytic decomposition study results show that the material can be used as a potential electrode candidate for the fabrication of energy storage devices and also for the production of free hydrogen if such devices are used in a fluidized bed reactor loaded with the as-prepared CNS as the catalyst bed.

• Nuclear Engineering and Technology
• /
• v.50 no.4
• /
• pp.570-581
• /
• 2018

Recently, a software program has been used in nuclear power plants (NPPs) to digitalize many instrumentation and control systems. To guarantee NPP safety, the reliability of the software used in safetycritical instrumentation and control systems must be quantified and verified with proper test cases and test environment. In this study, a software testing method using a simulation-based software test bed is proposed. The test bed is developed by emulating the microprocessor architecture of the programmable logic controller used in NPP safety-critical applications and capturing its behavior at each machine instruction. The effectiveness of the proposed method is demonstrated via a case study. To represent the possible states of software input and the internal variables that contribute to generating a dedicated safety signal, the software test cases are developed in consideration of the digital characteristics of the target system and the plant dynamics. The method provides a practical way to conduct exhaustive software testing, which can prove the software to be error free and minimize the uncertainty in software reliability quantification. Compared with existing testing methods, it can effectively reduce the software testing effort by emulating the programmable logic controller behavior at the machine level.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.640-647
• /
• 2023

Material corrosion in nuclear power plant (NPP) is not controlled only by amine injection but also by ion exchange (IX) which is the best option to remove trace Na⁺. This study was conducted to understand the Na⁺ leakage characteristics of IX beds packed with ethanolamine-form (ETAH-form) and hydrogen-form (H-form) resins in the simulated water-steam cycle in terms of intrinsic behaviors of four kinds of cation-exchange resins through ASTM test and Vanselow mass action modeling. Na⁺ was inappreciably escaped throughout the channel created in resin layer. Na⁺ leakage from IX bed was non-linearly raised because of its decreasing selectivity with increasing Na⁺ capture and with increasing the fraction of ETAH-form resin. Na⁺ did not reach the breakthrough earlier than ETAH⁺ and NH₄⁺ due to the increased selectivity of Na⁺ to the cation-exchange resin (H⁺ < ETAH⁺ < NH₄⁺ ≪ Na⁺) at the feed composition. Na⁺ leakage from the resin bed filled with small particles was decreased due to the enhanced dynamic IX processes, regardless of its low selectivity. Thus, the particle size is a predominant factor among intrinsic properties of IX resin to reduce Na⁺ leakage from the condensate polishing plant (CPP) in NPPs.