• Geomechanics and Engineering
• /
• 제2권4호
• /
• pp.281-302
• /
• 2010

An extended model for the response of a rigid footing on a reinforced foundation bed on super soft soil is proposed by incorporating the rough membrane element into the granular bed. The super soft soil, the granular bed and the reinforcement are modeled as non-linear Winkler springs, non-linear Pasternak layer and rough membrane respectively. The hyperbolic stress-displacement response of the super soft soil and the hyperbolic shear stress-shear strain response of the granular fill are considered. The finite deformation theory is used since large settlements are expected to develop due to deformation of the super-soft soil. Parametric studies quantify the effect of each parameter on the stress-settlement response of the reinforced foundation bed, the settlement and tension profiles.

• Geomechanics and Engineering
• /
• 제36권2호
• /
• pp.121-130
• /
• 2024

Many foundation projects are built on red-bed soft rocks, and the damage evolution of this kind of rocks affects the safety of these projects. At present, there is insufficient research on the damage evolution of red-bed soft rocks, especially the progressive process from mesoscopic texture change to macroscopic elastoplastic deformation. Therefore, based on the dual-porosity characteristics of pores and fissures in soft rock, we adopted a cellular automata model to simulate the propagation of these voids in soft rocks under an external load. Further, we established a macro-mesoscopic damage model of red-bed soft rocks, and its reliability was verified by tests. The results indicate that the relationship between the number and voids size conformed to a quartic polynomial, whereas the relationship between the damage variable and damage porosity conformed to a logistic curve. The damage porosity was affected by dual-porosity parameters such as the fractal dimension of pores and fissures. We verified the reliability of the model by comparing the test results with an established damage model. Our research results described the progressive process from mesoscopic texture change to macroscopic elastoplastic deformation and provided a theoretical basis for the damage evolution of these rocks.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.17-17
• /
• 2011

As a method of countermeasure to bed degradation and armoring phenomena of bed material in the downstream area of dam reservoirs, sediment augmentation (replenished sediment) has been carried out in many Japanese rivers. In general, bed of the replenished sediment site is composed of rocks, because the site is located in the downstream area of the dams and sediment supply is very small. Bed deformation process has been researched by many researchers. As a method of countermeasure to bed degradation and armoring phenomena of bed material in the downstream area of dam reservoirs, sediment augmentation (replenished sediment) has been carried out in many Japanese rivers. In general, bed of the replenished sediment site is composed of rocks, because the site is located in the downstream area of the dams and sediment supply is very small. Bed deformation process has been researched by many researchers. However, most of them can treat movable bed only and cannot be applied to the bed deformation process of sediment on rocks. If the friction angle between the sediment and the bed surface is assumed to be the same as the friction angle between the sediment and the sediment, sediment transport rate must be smaller without sediment deposition layer on the rocks. As a result, the reproduced bed geometry is affected very well. In this study, non-equilibrium transport process of non-cohesive sediment on rigid bed is introduced into the horizontal two dimensional bed deformation model and the model is applied to the erosion process of replenished sediment on rock in the Nakagawa, Japan. Here, the Japanese largest scale sediment augmentation has been performed in the Nakagawa. The results show that the amounts of the eroded sediment and the remained sediment reproduced by the developed numerical model are $56300m^3$ and $26800m^3$, respectively. On the other hand, the amounts of the eroded sediment and the remained sediment measured in the field after the floods are $56600m^3$ and $26500m^3$, respectively. The difference between the model and field data is very small. Furthermore, the bed geometry of the replenished sediment after the floods reproduced by the developed model has a good agreement with the measured bed geometry after the floods. These results indicate that the developed model is able to simulate the erosion process of replenished sediment on rocks very well. Furthermore, the erosion speed of the replenished sediment during the decreasing process of the water discharge is faster than that during the increasing process of the water discharge. The replenished sediment is eroded well, when the top of the replenished sediment is covered by the water. In general, water surface level is kept to be high during the decreasing process of the discharge during floods, because water surface level at the downstream end is high. Hence, it is considered that the high water surface level during the decreasing process of the water discharge affects on the fast erosion of the replenished sediment.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.112-116
• /
• 2019

This study was carried out by structural analysis using finite element method for designing high rigidity structure of multi - functional automatic lathe bed. As a result of comparison, it was confirmed that the weight was designed to be higher than the maximum deformation amount. The shape and dimensions of the main pillars and walls of the bed were changed to derive the most suitable design for the multifunction automatic lathe bed. A model of structural design was derived with the goal of minimizing the maximum deformation amount of $20{\mu}m$ or less and the weight of the bed. As a result of applying the derived design improvement proposal to the multifunctional automatic lathe bed, 57.4% weight reduction and maximum principal stress decreased by 45.0% than the initial design model. It is expected that the optimum design that meets these design conditions will reduce the weight of the structure as well as improve the safety of the structure and reduce the machining error in the operation of the machine tool.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1370-1376
• /
• 2008

The structure of railroad or subway is that low fare transportation system of the large traffic volume. Like this structure is subjected to the cyclic load of moving vehicle. Consequently the result of the settlement analysis or plastic deformation prediction of railroad bed could be used as an important factor in safety of the railroad. The results of cyclic triaxial test were used in the numerical analysis of power model which Li and Selig(1994) developed. The soil samples were obtained from the construction site of railroad. Cyclic triaxial test was conducted with the variation of the magnitude of cyclic load and soil types. The large magnitude of plastic deformation in the railroad bed is caused of structure failure of the railroad.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.89-96
• /
• 1994

This study is to develop a new composite material, a mixture of epoxy resin and granite aggergates which is called Expoxy-Granite, to overcome the inherent disadvantages of conventional materials commonly used as a bed structure material of long-term dimensional/ thermal stability. Under the various manufacturing conditions which could be formulated through experimental investigation, we have constructed 6 kinds of Epoxy-Granite structure models having one fifth the size of the ultra-precision machine tool bed structure. They are compared with cast iron and pure granite models through the dynamic test and the thermal deformation test. Both in the steel ball dropping test and in the forced vibration test, three types of epoxy-granite models made in this study have shown much better dynamic characteristics than the cast iron model and almost the same characteristics as compared with the pure granite model. In the thermal deformation test the above composite materials have also represented lower thermal displacements in the vertical direction of each model as compared with other specimens. It is therefore seen that the epoxy-granite complsite material can be applied to the construction of high-precision machine tool bed, instead of cast iron or pure granite.

• 한국해양환경ㆍ에너지학회지
• /
• 제7권4호
• /
• pp.199-206
• /
• 2004

연안 해역에서의 대규모 외해 구조물의 건설은 구조물 배후의 해안선으로부터 외빈에 이르는 광범위한 영역에서 심각한 해빈변형을 야기학 수 있다. 신 등[2000]과 신과 홍[2004]은 일련의 3차원 이동상 실험을 통하여 외해 구조물 배후의 표사이동 양상을 밝혔으며, 본 연구는 이들 실험 결과를 토대로 복합 3차원 해빈변형모델을 제안한 것이다. 제안된 모델은 3차원 이동상 실험 결과와의 비교를 통해 검정하였으며, 그 결과 외해 구조물 배후에 대한 해안선 측의 톰보로 재현은 물론 외빈대에서의 침식ㆍ퇴적역에 있어서도 좋은 일치를 나타내었다. 또한 대규모 인공섬 건설에 의한 해빈변형문제가 실제 야기되었던 현지 해안에 제안된 모델을 적용하여 그 타당성을 확인하였다.

• 한국수자원학회논문집
• /
• 제35권1호
• /
• pp.77-90
• /
• 2002

하상보호용 사석은 초기 거동조건의 범위를 넘어 한계조건에 도달하면 흐름에 의해서 각각의 자갈 또는 석재가 분리되면서 점진적으로 파괴된다. 이와 반대로 하상보호용 매트리스의 경우는 비록 초기 거동조건의 범위를 넘어 한계조건에 도달할지라도 매트리스 철망에 의해 각각의 자갈 또는 석재의 분리가 억제가 됨을 알 수 있었다. 비록 변형된 하상보호용 매트리스일지라도 새로운 형태의 평형을 얻을 수 있으며, 더 이상의 변형과 나쁜 조건에서도 저항할 수 있음을 확인하였다. 동일한 수리학적 거동조건에서 하상보효용 매트리스의 채움재로 사용된 자갈 또는 석재의 평균 크기가 하상보호용 사석의 1/2정도이며, 하상보호용 매트릭스에서 Shield 계수는 하상보호용 사석의 약 2배임을 알 수 있었다. 또한 동일한 크기의 자갈 또는 석재가 채움재로 사용될 때 허용유속에 대해서 하상보호용 매트리스의 경우 하상보호용 사석보다 2배이상 심지어 3∼4까지 견딜 수 있음을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.32-36
• /
• 2002

This paper presents the structural characteristic analysis of a centerless grinding machine with concrete bed. The centerless grinding machine is composed of grinding wheel head, regulating wheel head, concrete bed, wheel dresser and so on. Especially, the concrete bed is introduced to improve the static, dynamic and thermal characteristics of the centerless grinding machine. The structural analysis model of centerless grinding machine is constructed by the finite element method, and the structural characteristics in the design stage are estimated based on the structural deformation and harmonic response under the various testing conditions related to gravity force and directional farces

• 대한금속재료학회지
• /
• 제47권11호
• /
• pp.759-772
• /
• 2009

Amorphous alloys, in addition to being promising materials for a variety of practical applications, provide an excellent test bed for evaluating our understanding of the underlying physics on deformation in amorphous solids. Like many amorphous materials, amorphous alloys can exhibit either homogeneous or inhomogeneous deformation depending on the stress level. The mode of deformation has a strong influence on whether the material behavior is classified as ductile or brittle. It was observed that the characteristics of these deformations are largely dependent on the atomic-scale structures of the alloys and determine the amount of the plastic deformation prior to failure. In this study, the structural features that control the homogeneous deformation of amorphous alloys are outlined on the basis on experiments and molecular dynamics simulations.