• 한국해양학회지
• /
• v.22 no.1
• /
• pp.25-33
• /
• 1987

The transport and fate of fine-grained, cohesive sediments in an estuary were investigated numerically. A numerical model of sediment entrainment, deposition, and transport has been developed by incorporating recent results of laboratory and field investigations. The time-dependent flow fields produced by fiver inflow and semi-diurnal tides, were calculated, and the corresponding distributions of suspended-sediment concentrations were obtained. The time-changes of sediment bed condition due to entrainment and deposition were obtained. The entrained sediments contribute initially to high sediment concentrations in the estuary basin. As the time passes, the suspended-sediment concentrations were much reduced by the seaward transport due to residual currents. The erosional and dipositional areas were appeared to be strongly dependent on the current-velocity fields and sediment properties of the estuary.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.4
• /
• pp.83-93
• /
• 1983

A non-linear numerical tidal model of the Yellow Sea and the East China Sea is used to derive the mean and maximum bed stress the mean and maximum transport potential on the continental shelf. It has provided a preliminary assessment of relation between sediment transport paths and the mean and maximum bed stress distribution determined from the numerical model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.2
• /
• pp.127-133
• /
• 1999

The MOSU model, a depth-averaged two-dimensional sediment transport model, is applied to simulate the bed level changes before and after dock construction in Daemyung site. The model is a semi¬coupled finite difference model that can be applied to a river, a reservoir, a lake, estuaries, or coastal regions, The model is able to simulate the transport of fine sand, silt, and clay. The model parameters are estimated by qualitative calibration. A prediction result of the numerical model shows that the bed level changes due to dock construction are little.

• Journal of Korea Water Resources Association
• /
• v.32 no.6
• /
• pp.697-709
• /
• 1999

Two dimensional finite element model(RMA) is applied to examine sediment transport behavior near Buyeo water intake station of the Keum River. The simulation results of bed change with various discharge conditions agree with those of observation. As the alternatives of channel modification and resulting bed lowering near intake station, construction of jetties and removal of small island are considered. The station of jetties diverted the main stream toward the other side and the width of the main stream did not change so much. The bed elevation of the main channel is reduced about 5~20 cm, when flow condition of 12,030㎥/sec applied. The removal of small island provides the less significant effect on sediment movement. This study shows that the construction of jetties would be effective to reduce the entrainment of sediment.

• Water Engineering Research
• /
• v.3 no.2
• /
• pp.75-84
• /
• 2002

An Euler-Lagrange two-phase flow model is presented fur simulation sheet-flow transport under wave and current. The flow is computed by solving the Reynolds Averaged Navier-Stokes equation in conjunction with the k-$\varepsilon$ turbulence model for turbulence closure. The sediment transport is introduced as a motion of granular media under the action of unsteady flow from the Lagragian point of view. In other word, motion of every single particle is numerically traced with Movable Bed Simulator (MBS) code based on the Distinct Element Method (DEM), in which the frequent interparticle collision of the moving particles during the sheet-flow transport is sophisticatedly taken into account. The particle diameter effect on time-dependent developing process of sheet-flow transport is investigated, by using three different diameter sizes of sediment. The influence of an imposed current on oscillatory sheet-flow transport is also investigated. It is concluded that the sediment transport rate increases due to the relaxation process related to the time-lag between flow velocity and sediment motion.

• Journal of Korea Water Resources Association
• /
• v.37 no.12
• /
• pp.1033-1041
• /
• 2004

A 2-dimensional numerical sediment transport model using erosion rates in undisturbed conditions has been developed and applied to calculating the suspended sediment concentrations and bed level changes in the Lower Fox River The model reduces inaccuracy of sediment model by using the accurate erosion rates obtained in a flume (called Sedflume). The flume has been developed to measure erosion rates as a function of sediment depth and at the situation of high shear stresses such as flood event. Both mechanisms of suspended load and bedload transport are included in the model. The model results were verified for the description of sediment transport in a straight channel and the sediment transport during flood event in the Lower Fox River The results of Lower Fox River simulation showed good agreements with the observed SS concentrations. This model can be used to simulate sediment transport under the high shear conditions such as flood.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.203-206
• /
• 2008

There are lots of the narrow pass on alluvial channel of Korea. Most of research about this narrow pass of channel were focused on incremental effect of water level at backwater segment. In the meantime this research showed that it is important to valuate the river-bed variation at backward and forward around narrow pass. The sediment deposit at not only the backward of narrow pass but also the forward affected incremental effect of water level. The sediment deposit at the forward of narrow pass headed by sediment that passed through the narrow passed or scoured right around it.

• Journal of Korea Water Resources Association
• /
• v.44 no.1
• /
• pp.65-72
• /
• 2011

Natural streams meander, forming pools at the outer part of bend and riffles at the crossing. Pools are deep at a lower flow velocity, and riffles are shallow at a higher flow velocity. Attentions are being paid to pool-riffle sequences in meandering streams because pool-riffle sequences tend to increase biodiversity of the stream ecosystem. This study investigates the characteristics of distribution of bed sediment particles in the upstream reach of the Gap Stream, which is a tributary of the Geum River in Korea. The upstream part of the Gap Stream, the study reach, is a gravel-bed stream, showing a pool and three riffles due to meandering. The reach also includes pools at the upstream and downstream parts of the weir. The characteristics of bed sediment particles sampled at the wetland and in the side channel are studied, revealing that the median particle diameter in the riffle is about four times larger than that in the pool. In addition, flow simulations are carried out for ordinary discharge and design flood, and such parameters important to sediment transport as velocity, shear stress, dimensionless shear stress (or Shields number), and dimensionless shear velocity are provided to see the mobility of sediment particles in the pool-riffle sequence.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.3
• /
• pp.277-288
• /
• 1995

Prediction of turbidity due to fine-grained bed material load under wave action is critical to any assessment of anthropogenic impart on the coastal or lacustrine environment Waves tend to loosen mud deposits and generate steep suspension concentration gradients, such that the sediment load near the bottom is typically orders of magnitude higher than that near the surface. In a physically realistic but simplified manner, a simple mass conservation principle has been used to simulate the evolution of fine sediment concentration profiles and corresponding erodible bed depths under progressive, nonbreaking wave action over mud deposits. Prior field observations support the simulated trends. which reveal the genesis of a near-bed. high concentration fluidized mud layer coupled with very low surficial sediment concentrations. It is concluded that estimation of the depth of bottom erosion requires an understanding of mud dynamics and competent in situ sediment concentration profiling. Measurement of sediment concentration at the surface alone, without regard to the near-bed zone, can lead to gross underestimation of the erodible bed depth.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1992.08a
• /
• pp.158-165
• /
• 1992

Bottom sediments, in various types of sediment transport models, have been usually assumed to be horizontally and/or vertically homogeneous. The assumption may be appropriate in well-sorted sedimentary environments including sand beaches and high turbid regions of fine grained cohesive sediments. (omitted)