• 한국멀티미디어학회논문지
• /
• 제21권3호
• /
• pp.382-390
• /
• 2018

A major accident occurring on the bed is falls that occur during at times when the care of nurses or protectors is inadequate, which is fatal to patients or the elderly. In particular, Enuresis or sleepiness caused by sleep apnea increases the risk of falls. Therefore, it is very important to detect falls and sleep apnea of patients without infringing privacy in the bed to patient's safety and accident prevention. In this paper, we reviewed the technologies developed for bed monitoring and implemented a non-intrusive monitoring system. The Occupancy Sensor allows the temperature of the bed and surrounding area to be extracted to enable track of the patient's motion. The Doppler Radar detects the patient's movements at normal times and the respiration state when patients have no movement during sleeping. It is specially designed for real-time monitoring of falling and respiration during sleeping through contactless multi-sensing while solving patient's privacy problems.

• 토지주택연구
• /
• 제8권3호
• /
• pp.161-169
• /
• 2017

In this study, sediment transfer and precipitation analysis of the test bed watershed was conducted through the model for the application and practical use of the urban sediment disaster prevention technology, and used this as an aid to design to secure reliability. In addition, conducted the test bed monitoring with the defense technology, analyzed the effect, and established the maintenance plan. Analyzed the change of soil deposition volume through arbitrary slope adjustment for the currently installed stormwater conduit of the test bed watershed. As a result, it is important to reduce the total sedimentation amount in the adjustment of the slope of the entire pipeline, but it is important that the sedimentation depth of each sediment does not rise to such a degree as to threaten the performance of the pipeline. Considering these matters, it is necessary to design the pipeline to prevent the clogging of the soil from the viewpoint of the reliability of the entire pipeline. The sediment disaster defense technology test bed is divided into a new city and an old city, and old city test bed is under construction. The result obtained through the monitoring of the test bed in the new city, sediment disasters such as debris can delay the time to reach the downtown area, and it is possible to secure the golden time, such as evacuation and rescue through the warning system. Also, the maintenance of the test bed application was suggested. Continuous and systematic monitoring is required for securing the reliability of element technology and successful commercialization.

• Parasites, Hosts and Diseases
• /
• 제58권1호
• /
• pp.99-102
• /
• 2020

Two-point mutations (V419L and L925I) on the voltage-sensitive sodium channel of bed bugs (Cimex lectularius) are known to confer pyrethroid resistance. To determine the status of pyrethroid resistance in bed bugs in Korea, resistance allele frequencies of bed bug strains collected from several US military installations in Korea and Mokpo, Jeollanamdo, from 2009-2019 were monitored using a quantitative sequencing. Most bed bugs were determined to have both of the point mutations except a few specimens, collected in 2009, 2012 and 2014, having only a single point mutation (L925I). No susceptible allele was observed in any of the bed bugs examined, suggesting that pyrethroid resistance in bed bug populations in Korea has reached a serious level. Large scale monitoring is required to increase our knowledge on the distribution and prevalence of pyrethroid resistance in bed bug populations in Korea. Based on present study, it is urgent to restrict the use of pyrethroids and to introduce effective alternative insecticides. A nation-wide monitoring program to determine the pyrethroid resistance level in bed bugs and to select alternative insecticides should be implemented.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.7089-7097
• /
• 2015

본 논문에서는 4대강 살리기 사업이 수행된 낙동강의 하상변동 양상을 해석하기 위해 과거 장기 모니터링 자료를 활용한 하상변동 분석을 수행하였다. 또한 4대강 살리기 사업 후 가장 큰 하상변동이 관측된 구간을 대상으로 향후 발생할 수 있는 장기 하상변동을 1차원 하상변동모형을 구축하여 예측하였다. 유입유사량 조건 및 유사이송공식에 따른 하상변동 예측 결과 값의 민감도 분석을 수행하였으며 단기 모니터링 실측자료와 하상변동 모의결과 값을 비교하여 모형 보정을 수행한 후 10년 장기 하상변동을 예측하였다. 모니터링 자료 분석 결과, 4대강 창녕 함안보-합천 창녕보 구간에서 전반적으로 가장 큰 최심하상고 변화가 나타났다. 1차원 하상변동 모형을 활용한 10년 동안의 장기 하상변동 수치모의에서는 창녕 함안보와 합천 창녕보 구간에서 구간별로 최대 2.07 m에서 3.26 m의 유사 퇴적이 발생하는 것으로 나타났다.

• 한국전산구조공학회논문집
• /
• 제33권2호
• /
• pp.113-119
• /
• 2020

사물인터넷 기반의 센서네트워크는 저렴한 비용으로 효율적으로 교량 등의 시설물 유지관리에 적용할 수 있는 한 방안이다. 본 연구에서는 사물인터넷 통신의 하나인, LoRa LPWAN 기반으로 교량 구조건전성모니터링을 위한 시스템을 개발하기 위해서 케이블 장력 모니터링을 위한 센서보드, 기존 계측 센서들과 함께 센서네트워크를 구축하기 위한 DAQ 보드, 데이터들 처리하고 LoRa 통신을 위한 스마트센서노드를 설계 및 제작하였으며 모니터링을 위한 센서네트워크를 구축하였다. 또한 본 시스템의 성능검증을 위해 영광대교에 Test Bed를 구축하여 교량 구조건전성 모니터링을 위한 센서네트워크에 적용가능성 여부를 살펴보았다. Test Bed 검증 결과 LoRa LPWAN 기반 센서네트워크는 데이터 전송률, 정확도, 경제성면에서 교량 구조 건전성 모니터링의 기술 중에 하나로 적용될 수 있으며, 향후 교량구조물 뿐만 아니라 다양한 공공기반 시설물에 유지관리를 위한 시스템으로 보급될 수 있기를 기대한다.

• 항공우주기술
• /
• 제11권1호
• /
• pp.178-184
• /
• 2012

본 논문에서는 초경량항공기의 사고 예방을 위한 실시간 안전진단 시스템(Health and Usage Monitoring System; HUMS)을 개발함에 있어 Test-bed 항공기에 HUMS를 적용한 주익 제작 과정을 살펴보고자 한다. 대상 항공기는 Jabiru-UL 모델이며, 주익 내부에 설치한 센서는 광섬유센서, 압전센서 및 스트레인 게이지이다. 센서 설치 후 조립을 완료한 주익에 대한 각 센서의 동작 여부에 대한 계측시험을 수행하였다. 조립 완료한 주익은 항공기에 장착되어 HUMS의 운영 성능 향상을 위한 데이터 획득 및 고장검출 알고리즘의 검증을 위한 Test-bed로 활용하고자 한다.

• 대한의용생체공학회:의공학회지
• /
• 제35권5호
• /
• pp.169-176
• /
• 2014

As body postures on bed affects various sleep related diseases, it is considered as important information when monitoring sleeping in daily life. Though there have already been a few approaches to monitor body postures on bed conventionally, the development for simple and unconstrained methods is still needed to realize the long-term daily monitoring. Focusing on the fact that ballistocardiogram changes depending on the body postures on bed, we developed a novel method to estimate body posturesusing extremely simple, film-type ballistocardiogram sensor which is based on polyvinylidene fluoride(PVDF) film. With 10 subjects, we performed two experiments. One was for an estimation test to show that body postures on bed can be estimated by ballistocardiogram, and the other was for a reproducibility test to present the feasibility of ballistocardiogram based body postures monitoring. To estimate body postures on bed, we made an individual template set of body postures by designating one ballistocardiogram (BCG) sample as a template in each postures. Then, we calculated Pearson's correlation coefficients between a sample and each templates and estimated the body posture of the sample by choosing a posture which corresponds to the most significant correlation coefficients. As a result, we estimated body postures on bed with 99.2% accuracy in average and found that the estimation using ballistocardiogram is reproducible.

• 상하수도학회지
• /
• 제29권6호
• /
• pp.617-623
• /
• 2015

In this study, determination methods of monitoring location in water distribution system were suggested and applied to real test bed. Small block of Gwangtan water distribution system is consisted of 582 pipes, 564 junctions, 1 reservoir, and 1 pump station. Small block of Ho Chi Minh water distribution system is consisted of 162 pipes, 148 junctions, and 1 reservoir. Two small block water distribution systems were analyzed by pressure contribution analysis method to determine the optimum monitoring locations. The pressure change was estimated at each junctions by the additional demand at a junction. From the results, the optimum monitoring location can be determined by rank of pressure contribution index at each junctions due to demand change at a junction.

• 청정기술
• /
• 제15권2호
• /
• pp.130-136
• /
• 2009

상용촉매인 Johnson Matthey사 KATALCO 83-3 촉매를 이용하여 마이크로 채널 반응기 (micro-channel reactor: MCR) 형태에 따른 메탄올 수증기 개질반응을 통한 수소제조반응 특성 연구를 수행하였다. 반응온도 200${\sim}$300$^{\circ}C$, 공간속도 3,000${\sim}$10,000 $hr^{-1}$, 촉매 크기 0.05${\sim}$2.2 mm 조건을 갖는 고정층 반응기에서 반응활성 실험을 수행한 결과, 촉매 크기 0.35 mm에서 최적의 반응활성을 나타났다. 이 결과를 토대로 stacked bed, boat bed 등 마이크로 채널 반응기 형태에 따른 반응활성을 연구한 결과, stacked bed type 마이크로 채널 반응기가 더 좋은 반응활성을 가짐을 알 수 있었다.

• 대한임베디드공학회논문지
• /
• 제9권3호
• /
• pp.165-171
• /
• 2014

In this paper, we propose the hardware and software of a test-bed of a hovering AUV (autonomous underwater vehicle). Test-bed to develop as the underwater robot for the hovering -type is planning to apply for marine resource development and exploration for deep sea. The RTU that controls a azimuth thruster and a vertical thruster of test-bed is a intergrated-type thruster. The main control unit that collects sensor's data and performs high-speed processing and controls a movement of test-bed is a underwater hybrid navigation system. Also it transfers position, posture, state information of test-bed to the host PC of user using a wireless communication. The host PC checks a test-bed in real time by using a realtime monitoring system that is implemented by LabVIEW.