• 제목/요약/키워드: Beating noise

검색결과 31건 처리시간 0.038초

LPLi 연료펌프의 맥놀이 소음 저감 연구 (Reduction of Beating noise at LPLi pump)

  • 강태식;심재기
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
    • /
    • pp.161-165
    • /
    • 2005
  • Until now LPG car has drived used to mixer and vaporizer. So LPG car always has problems back fire and when in the winter. LPG Car's Fuel consumption is rather than gasoline. But LPLi Fuel pump located in the fuel tank is directly injection in the engine. So Fuel consumption is better than LPG mixer system and result to reduced exhaust gas. In this paper to reduction of beating noise of LPLi(liquid phase LPG Injection) fuel pump. General speaking we know, beating noise is occur to near frequency each of pump. So we Modification of RPM through chang of amature turn number and area of dimension of the pump's body.

  • PDF

팬 작동에 따른 비팅성 아이들 진동 평가 (Evaluation of idle vibration beated by cooling fan imbalance)

  • 박진한;안세진;정의봉
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.247-249
    • /
    • 2014
  • The beating phenomenon occurs because of various causes, when idle vibration was happened. In this study, the beating phenomenon was divided into several parameters and controlled by the parameter. It was hypothesized that the beating parameter is related to discomfort of idle vibration. The three-down one-up method was performed for evaluating discomfort of controlled vibrations, which is widely used in the field of psychophysics. As a result in pilot test, a subject responds beating vibration more discomfort than normal idle vibration. In the future, the study will be implemented to know how much the parameters of beating signal affect to the discomfort at idle vibration in passenger vehicle.

  • PDF

고속 여객선 선미부 과대 진동/소음 감소를 위한 연구 (Study on Reduction of Excessive Noise and Vibration of Aft Part of High Speed Ro-Ro Passenger Ship)

  • 신윤길
    • 한국해양공학회지
    • /
    • 제33권2호
    • /
    • pp.196-202
    • /
    • 2019
  • In this study, the excessive noise and vibration phenomena of a high-speed Ro/Ro passenger ship were analyzed, and a countermeasure was taken based on them. This ship was granted a comfort class notation by the classification society, which was COMFORT-VIBRATION-II and COMFORT-NOISE-CREW-II. However, unfortunately, excessive noise and vibration in the aft part of the ship were delivered from the twin shaft propellers, and therefore the Class Requirement was not satisfied before delivery. In order to obtain the class notation, all of the concerned parties came to an agreement to reduce the noise and vibration level during operation after delivery because a seasonal ferry service was already scheduled and the cabin was fully booked. The root cause of the massive amount of noise and vibration was mainly the propeller-induced excitation pulse and beating that occurred from the mismatch of the rotating speeds of the two shaft lines. A 1st order vibrating force and beating phenomena existed in the propeller. Thus, a reduction of the excitation force, elimination of the beating phenomena, and decrease of the noise level at the aft area cabins and public spaces were required. In addition, structural reinforcements were conducted using pillars and additional girders at the aft part of the decks.

단시간 푸리에 변환과 맥놀이를 이용한 강건한 결함 진단법 (Robust Damage Diagnostic Method Using Short Time Fourier Transform and Beating)

  • 이호철
    • 한국소음진동공학회논문집
    • /
    • 제15권9호
    • /
    • pp.1108-1117
    • /
    • 2005
  • A robust damage detection method using short-time Fourier transform and beating phenomena is presented as an estimating tool of the healthiness of large structures. The present technique makes use of beating phenomena that manifest themselves when two signals of similar frequencies are added or subtracted. Unlike most existing methods based on vibration signals, the present approach does not require an analytic model for target structures. Furthermore, the main advantage of the proposed method compared to the competing diagnostic method using vibration data is its robustness. The proposed method is not affected by the amplitude of exciting signals and the location of exciting points. From a measuring view point. the location of sensing point have no influence on the performance of the present method. With a view to verifying the effectiveness of this method. a series of experiments are made and the results show its possibility as a robust damage diagnostic method.

실시간 기본주파수 추종방법에 근간한 조화 신호의 능동제어 (Active Control of Harmonic Signal Based on On-line Fundamental Frequency Tracking Method)

  • 김선민;박영진
    • 소음진동
    • /
    • 제10권6호
    • /
    • pp.1059-1066
    • /
    • 2000
  • 본 논문에서는 고조파 소음을 내는 시스템의 기본 주파수 추정을 통한 새로운 피드백 능동소음제어 방법을 제안한다. 기준신호를 측정하기 어려운 상황에서 종래의 다중 정현파 소음의 능동제어 방법은 기준신호를 측정하는 대신 추정된 주파수를 이용하여 기준신호를 만들어낸다.$^{(4)}$ 그러나 맥놀이현상(beating phenomenon)이 존재할 때는 순간적으로 특정 주파수 성분이 사라지게 되므로 적응 주파수 추정이 어렵게 되어 맥놀이현상에 의한 주파수 추정에서의 혼돈은 만들어진 기준신호를 쓸모없게 만든다. 제안된 알고리즘은 두 가지 부분으로 구성된다. 첫째는 기본주파수 추정을 이용한 기준신호 발생기이고 둘째는 기존의 피드포워드 제어 부분이다. 제안된 결정 규칙을 이용한 기본주파수 추정알고리즘은 맥놀이현상에 둔감할 뿐 아니라 기존의 직렬형 적응노치필터 방법에 비해 좋은 추종성능과 적은 주파수 추정 오차의 분산을 갖는다.$^{(4)}$ 더욱이 신호대잡음비가 좋지 않아 기존의 주파수 추정방법으로는 추정될 수 없는 주파수 성분가지 제어가 가능하다. 제안된 능동소음제어 방법의 성능을 검증하기 위해서 실측한 선박의 객실 소음과 자동차의 시변하는 엔진부밍소음에 대해서 모의 실험을 수행한다.

  • PDF

유체 커플링의 맥놀이 현상 사례 연구 (Case Studies on Beating Phenomena of Hydraulic Couplings)

  • 최성필;박종포;김호종
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
    • /
    • pp.133-138
    • /
    • 1997
  • Belt-conveyer driving systems, which transport coal stored in the yard of a coal-fired fossil power plant to coal silos, experienced severe vibrations. From measurement, it was found that the vibrations showed beating phenomenoa and arose from hydraulic couplings installed between motors and gear boxes. In the present paper, described are results of case studies on vibration troubleshooting for the belt-conveyor driving systems: 1)resonance of the system; 2)field balancing.

  • PDF

외부 광주입에 의한 모드 잠금된 고리형 광섬유 레이저의 스펙트럼 빗살 안정화 (Spectral Comb Stabilization of a Mode-Locked Semiconductor Fiber Ring Laser by External Optical Injection)

  • 서동선
    • 전기전자학회논문지
    • /
    • 제15권4호
    • /
    • pp.313-318
    • /
    • 2011
  • 10 GHz 고조파 모드잠금 고리형 반도체 광섬유 레이저의 외부 CW 광주입 효과를 연구하였다. 선폭 ~ 100 KHz의 코히어런트 외부 광주입에 의해 40 dB가 넘는 스펙트럼 빗살의 골짜기와 30 dB가 넘는 슈퍼모드 비팅 잡음 억제효과를 얻을 수 있었다. 저가의 주입광원을 이용할 수 있는지를 조사하기 위해 주입광을 대략 10 MHz의 선폭을 갖는 DFB 레이저로 교체하였다. 그 결과, 스펙트럼 빗살의 골짜기는 유사한 특성을 보였으나, 슈퍼모드 비팅 잡음은 억제되기보다는 오히려 증가하는 것으로 관측되었다.

조화신호의 실시간 기본 주파수 추종 방법과 능동소음제어에의 응용 (On-line Fundamental Frequency Tracking Method for Harmonic Signal and Application to ANC)

  • 김선민;박영진
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.263-268
    • /
    • 2000
  • 본 논문에서는 고조파 소음을 내는 시스템의기본 주파수 추정을 통한 새로운 피드백 능동소음제어 방법을 제안한다. 기존신호를 측정하기 어려운 상황에서 종래의 다중 정현파 소음의 능동제어 방법은 기준신호를 측정하는 대신 추정된 주파수를 이용하여 기준신호를 만들어낸다. 그러나 비팅현상(beating phenomenon)이 존재할 때는 순간적으로 특정 주파수 성분이 사라지게 되므로 적응 주파수 추정이 어렵게 되어 비팅현상에 의한 주파수 추정에서의 혼돈을 만들어진 기준신호를 쓸모없게 만든다. 제안된 알고리즘은 두 가지 부분으로 구성된다. 첫째는 기본주파수 추정을 이용한 기준신호 발생기이고 둘째는 기존의 피드포워드 제어부분이다. 제안된 결정 규칙을 이용한 기본주파수 추정알고리즘은 비팅현상에 둔감할 뿐 아니라 기존의 직렬형 적응노치필터 방법에 비해 좋은 추종성능과 적은 주파수 추정 오차의 분산을 갖는다. 더욱이 신호대잡음비가 좋지 않아 기존의 주파수 검증하기 위해서 실측한 선박의 객실 소음과 자동차의 시변하는 엔진부밍소음에 대해서 모의 실험을 수해한다.

  • PDF

타이어의 모노럴 비팅음이 인체에 유발하는 영향에 관한 기초 연구 (Preliminary Study on the Effects of Monaural Beating Sound of Tires to Human Body)

  • 백광현
    • 한국음향학회지
    • /
    • 제30권1호
    • /
    • pp.49-55
    • /
    • 2011
  • 타이어 피치블록의 수에 따라 발생된 모노럴 비팅음이 사람에 미치는 영향을 실험을 통하여 측정하고, 알파파 강화와 유사한 긍정적 생리 변화를 인체에 줄 수 있는지 그 가능성을 알아보았다. 실험의 반복성 및 측정 여건 등 여러 요인으로 인하여, 모노럴 비팅음 발생 타이어가 장착된 차량의 주행에서 녹음된 음을 정온한 환경의 실험실에서 재생하고 신체 반응을 HRV를 이용하여 측정한 후 각종 파라미터를 추출, 통계 분석하여 그 효과를 검증하였다. 통계적으로 유의한 결과 요소는 적었지만 긍정적 신체 변화 유발이 가능할 수도 있음을 보여주었다.