• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.365-372
• /
• 2013

The multibeam surveillance radar is a state-of-art of 3D radar technology. It applies the stacked beams realized by a digital beamformer. In this paper, a hybrid compensation technique on elevation angle errors for low elevation angle targets over the sea in multipath radar environments is proposed. The proposed method can be applied to stacked beam radars. Double null algorithm based on maximum likelihood method in 3-D beamspace domain works well unless the phase difference between the two rays(direct and specular path) is close to $0^{\circ}$ and the magnitude of reflection coefficient is close to 0. To overcome these problems, we propose a hybrid compensation technique which uses the selective double null algorithm and the beam-ratio compensation technique for low-elevation errors on a log scale. Results of computer simulation show that the proposed method outperform conventional monopulse method and double null algorithm only under various multipath environments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.8 s.338
• /
• pp.25-32
• /
• 2005

Frequency hopping system has been adopted to many communication systems in order to overcome the inferior situation such as jamming environment. But typically its processing gain being limited, data interfered by jamming signal could not be fully recovered. This can be enhanced by combing FH system with spatial interference canceller which is a kind of active beamformer In this Paper, we proposed the compensation method of weight vector discrepancy according to the hopped frequencies and the PMBF method which is able to eliminate the inference effectively with less computational complexity. That is, the steering vector of wanted signals can be calculated from the frame without jamming signals using eigen analysis. New projection matrix extracted by the steering vector of wanted signal eliminates the interferences from the covariance matrix of received signal including wanted signal and jamming signals. This PMBF has similar performance of SINR beamformer with less computational complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10A
• /
• pp.974-983
• /
• 2007

In this paper, a low complexity subcarrier allocation scheme is proposed for multiuser MIMO-OFDM systems with zero-forcing beamformer (ZFBF) so that the total transmit power can be minimized satisfying given target data rate. Since the optimal method requires very high computational complexity, we propose a low complextiy suboptimal method. Using the fact that the effective channel gain is proportional to the orthogonallity of channels of multiplexed users, a user set with the highest orthogonality of channel among users is assigned to each subcarrier in order to minimize required transmit power. The numerical results show that the proposed suboptimal method can reduce computational complexity with little performance loss.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.110-115
• /
• 2001

In this paper, we propose a beamformer adequate for the nested away that is generally used for multiple frequency band signal processing. The nonisotropic beam pattern of channel in this array causes two problems: the bearing-estimate error of mainlobe and the difference between design and output in sidelobe level. By separating the time delay among channel signals and the time delay among sensor signals in channel, we can remove the effects of the nonisotropic beam pattern of channel in the beamformer output. Through this process, a method to correct simultaneously these problems is proposed.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.5
• /
• pp.478-484
• /
• 2002

Linear towed arrays (LTA) have a nonlinear shape due to tow vessel motion, ocean swells and currents. By reasons of nominally linear shape, various towed array shape estimation techniques have been developed since the perturbed shape cause the error in target detection. In this paper,, we propose the beamforming method for the perturbed LTA with simple structure. The proposed method linearizes a nonlinear phase of steering vector with position information measured by two reference sensors. It can be proved using some properties of Markov transition matrix, and iteration number of linearization process is decided by variance of cross phase difference. As a result of computer simulation in the ocean environment, beampattern of the proposed method is almost same with the ideal case in my type of array shape. In the signal-to-noise ratio (SNR) performance simlation, the DOA estimation performance of the proposed beamforming method is evaluated, and the comparison with Bartlett beamformer of the LTA shows that the proposed method can estimate. the spatial characteristic of sources more accuracy.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.62-68
• /
• 2002

It is well known that the MDVR beamforming outperforms the conventional delay-sum beamformer in the sense of noise rejection and bearing resolution. However, the MDVR method requires long observation time to achieve high frequency resolution. The STMV method uses the steered covariance matrix of sensor data, so it has an ability to form an adaptive weight vector from a single time-series snapshot. But it uses the same weight vector across all frequencies. In this paper, we propose an SSMV method. The basic idea of the SSMV method is to decompose a full frequency band into several subbands to acquire a weight vector for each subband, individually. Also the wrap may be divided into several subarrays in order to reduce a computational load and the bandwidth of each subband. Simulations using real sea trial data show that the proposed SSMV method has good performance with short observation time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.249-253
• /
• 2006

We propose a new beamforming algorithm, which is based on simplex downhill optimization method in the presence of pilot channels in cdma2000 reverse-link, for the rake structure antenna array in DS/CDMA communication system. Our approach uses the desired signal(pilot) covariance matrix and the interference covariance matrix. The beamforming weights are made according to maximum SINR criteria using simplex downhill optimization procedure. Our proposed scheme provides lower computational load, better convergence speed, better performance than existingadaptive beamforming algorithm. The simplex downhill method is well suited to finding the optimal or sub-optimal weight vector, since they require only the value of the deterministic function to be optimized. The rake beamformer performances are also evaluated under several set of practical parameter values with regard to spatial channel model. We also compare the performance between conventional rake receiver and the proposed one under same receiving power.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.145-148
• /
• 2004

수중음향 시스템에서는 빔형성(Beamforming) 기법을 이용하여 목표물로부터 신호를 수신하고 이에 대한 정보를 얻어낼 수 있는데, 이러한 빔형성에 있어서 주엽(Mainlobe)의 빔폭(Beamwidth)과 부엽(Sidelobe)의 크기(Level)를 설계자가 목표하는 값에 최적화 시킬 수 있는 방법을 찾는 것이 무엇보다도 중요하다 최근 연구된 빔형성 기법의 대표적인 결과 중 하나로는 Phi1ip의 Weighting Function Method를 들 수 있다. 이러한 Phi1ip의 방법은 목표 주엽폭과 부엽 준위를 정하고 이를 적응필터 설계방식과 유사하게 적응시켜 나가는 과정을 이용한다. 그러나 이 방법은 주엽폭과 부엽 준위간의 상관관계로 인해서 원하는 부엽준위에 다다르지 못하거나 결과값을 얻는데 상당한 시간이 소요되는 경우가 자주 발생하는데, 이러한 단점을 보완하기 위하여 본 논문에서는 부엽 준위에 미치지 못하는 일부에 대하여 부분 최적화를 시켜 비교적 쉽게 설계를 만족시키는 새로운 알고리듬을 제안하고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.74-80
• /
• 2001

Because of ocean waves, swell, steering corrections, etc, the hydrophones of a towed array will not live along a straight line. However the degradation of bearing estimation performance occurs when beamforming is carried out on the hydrophone outputs of an acoustic towed array which is not straight. So it is required to estimate the shape of the array for the improved beamformer output. In this paper, an iterative array shape estimation technique is presented, which is based on the use of the least squares polynomial fitting to the data from heading sensors. The estimation error and the influence of deformations on the performance of the conventional beamformer output are investigated. Finally, the suggested method is applied to the real system in order to investigate the applicability.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.24-30
• /
• 2006

This paper considers interference suppression and multipath mitigation in Global Navigation Satellite Systems (GNSSs). We propose an anti-jam GNSS receiver which suppresses interference and multipath by subspace projection method. The resulting interference suppressed and multipath mitigated signal is then process by a beamformer, whose weight vector maximizes the signal-to-noise ratio of the output signal. The enhanced performance is shown by refined cross correlation and beam pattern.