• 한국재료학회지
• /
• 제21권8호
• /
• pp.450-455
• /
• 2011

[ $Al_2TiO_5$ ]has a high refractive index and good solubility of the chromophore in the $Al_2TiO_5$ lattice, which allows this structure to be a good candidate for the development of new ceramic pigments. However, pure $Al_2TiO_5$ is well known to decompose on firing at $900{\sim}1100^{\circ}C$. However, this process can be inhibited by the incorporation of certain metal cations into its crystalline lattice. In this study, the synthesis of gray ceramic pigment was performed by doping cobalt on the $Al_2TiO_5$ crystal structure. The $Al_2TiO_5$ was synthesized using $Al_2O_3$ and $TiO_2$, and doped with $Co_3O_4$ as a chromophore material. In order to prevent the thermal decomposition during the cooling procedure, MgO was added to samples by 0.05 mole, 0.1 mole, and 0.15 mole as a stabilizer. The samples were fired at $1500^{\circ}C$ for 2 hours and cooled naturally. The crystal structure, solubility limit, and color of the synthesized pigment were analyzed using XRD, Raman spectroscopy, UV, and UV-vis. $Al_2O_3$ was available for the formation of $CoAl_2O_4$, which should also be considered in order to explain the small amount of this phase detected in the sample with the higher $Co^{2+}$ content (${\geq}$ 0.03 mole). It was found that the solubility limit of $Co^{2+}$ in the $Al_2TiO_5$ crystal was 0.02 mole% through an analysis of Raman spectroscopy. Through the addition of a pigment with 0.02 mole% of $Co^{2+}$ to lime-barium glaze, stabilized gray color pigments with 66.54, -2.35, and 4.68 as CIE-$L^*a^*b^*$ were synthesized.

• 공업화학
• /
• 제3권2호
• /
• pp.256-265
• /
• 1992

NaCl(30wt%)/ZnO(60wt%)/${\alpha}-Al_2O_3$ 촉매상에서 메탄의 oxidative coupling 반응의 속도식을 연구하여 활성 산소종에 관하여 고찰하였다. 반응온도 $650^{\circ}C$에서 $750^{\circ}C$까지 메탄의 전화율 10%미만의 범위에서 메탄과 산소의 분압을 변화시켜 가면서 메탄의 전환속도를 측정하여 속도식을 검증하였다. 제안된 메틸라디칼의 생성반응은 Langmuir-Hinshelwood형 반응기구를 따른다. 촉매표면의 서로 다른 활성점에 흡착된 메탄분자와 산소분자가 반응하여 메틸라디칼이 생성되는 반응이 속도결정단계이며, 이때 활성화 에너지는 약 39kcal/mol이었다. 메탄의 C-H 결합의 해리에 관여하는 산소종은 표면상의 이원자 산소인 $O{_2}{^{2-}}$나 $O_2{^-}$로 제시할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.57.2-57.2
• /
• 2011

Dye-sensitized solar cells (DSSC) have recently been developed as a cost-effective photovoltaic system due to their low-cost materials and facile processing. The production of DSSC involves chemical and thermal processes but no vacuum is involved. Therefore, DSSC can be fabricated without using expensive equipment. The use of dyes and nanocrystalline $TiO_2$ is one of the most promising approaches to realize both high performance and low cost. The efficiency of the DSSC changes consequently in the particle size, morphology, crystallization and surface state of the $TiO_2$. Nanocrystalline $TiO_2$ materials have been widely used as a photo catalyst and an electron collector in DSSC. Front electrode in DSSC are required to have an extremely high porosity and surface area such that the dyes can be sufficiently adsorbed and be electronically interconnected, resulting in the efficient generation of photocurrent within cells. In this study, DSSC were fabricated by an screen printing for the $TiO_2$ thin film. $TiO_2$ nanoparticles characterized by X-ray diffractometer (XRD) and scanning electron microscope (SEM) and scanning auger microscopy (SAM) and zeta potential and electrochemical impedance spectroscopy(EIS).In addition, DSSC module was modeled and simulated using the SILVACO TCAD software program. Improve the efficiency of DSSC, the effect of $TiO_2$ thin film thickness and $TiO_2$ nanoparticle size was investigated by SILVACO TCAD software program.

• 한국표면공학회지
• /
• 제54권3호
• /
• pp.144-151
• /
• 2021

In the present work, planar-type ZnO powder of [0001] plane with a high aspect ratio range of 20:1 to 50:1 was synthesized. Ag or CuO could be coated on the planar-type ZnO powder by wet methods such as centrifugation or ball milling. During the coating, the average size of the powder was slightly increased while maintaining the shape and XRD pattern of ZnO. When Ag or CuO was coated, the absolute value of the zeta potential, as well as the concentration of oxygen vacancy, was increased. Ag or CuO coated planar-type ZnO power exhibited excellent antibacterial performance, which seems to be related to their high electrostatic attraction force. They could be made into a masterbatch by mixing with ABS resin, and their applicability to antibacterial substances was confirmed by manufacturing the caps of a keyboard.

• Advances in nano research
• /
• 제10권3호
• /
• pp.295-312
• /
• 2021

A new ionic liquid functionalized magnetic silica nanoparticle was synthesized and characterized and tested as an adsorbent. The adsorbent was used for magnetic solid phase extraction on ICP-MS method. Simultaneous determination of precious metal Au has been addressed. The method is simple and fast and has been applied to standard water and surface water analysis. A new method for separation/analysis of trace precious metal Au by Magnetron Solid Phase Extraction (MSPE) combined with ICP-MS. The element to be tested is rapidly adsorbed on CoFe2O4@SiO2@[BMIM]PF6 composite nano-adsorbent and eluted with thiourea. The method has a preconcentration factor of 9.5-fold. This method has been successfully applied to the determination of gold in actual water samples. Hydrophobic Ionic Liquids (ILs) 1-butyl-3-methylimidazole hexafluorophosphate ([BMIM]PF6) coated CoFe2O4@SiO2 nanoparticles with core-shell structure to prepare magnetic solid phase extraction agent (CoFe2O4@SiO2@ILs) and establish a new method of MSPE coupled with inductively coupled plasma mass spectrometry for separation/analysis of trace gold. The results showed that trace gold was adsorbed rapidly by CoFe2O4@SiO2@[BMIM]PF6 and eluanted by thiourea. Under the optimal conditions, preconcentration factor of the proposed method was 9.5-fold. The linear range, detection limit, correlation coefficient (R) and relative standard deviation (RSD) were found to be 0.01~1000.00 ng·mL-1, 0.001 ng·mL-1, 0.9990 and 3.4% (n = 11, c = 4.5 ng·mL-1). The CoFe2O4@SiO2 nanoparticles could be used repeatedly for 8 times. This proposed method has been successfully applied to the determination of trace gold in water samples.

• 한국병원경영학회지
• /
• 제3권1호
• /
• pp.34-61
• /
• 1998

A study on cooperative medical treatment system between oriental and western medical practitioners was conducted from March through August 1997 in order to determine a productive model of cooperation of two medical parts for treatment of patients. Questionnaires were distributed to 195 medical doctors(M.D.) and 195 doctors of oriental medicine(O.M.D.) working in clinics and hospitals in six major cities. Statistical analysis tools used for this study were frequency, t-test and multiple regression by using SPSS/P.C package. The results are summarized as follows: 1. The respondents were composed of male docotors(78%) and female doctors(22%) and 68.2% of M.D. and 97% of O.M.D. were interested in the other medical part. The doctors of both disciplines had some limitation on treatment of patients but they were reluctant to refer their patients to other doctors in different discipline. 2. M.D assumed that oriental medicine was more effective for chronic diseases, and O.M.D. thought that western medicine was more effective for acute diseases. 92.3% of O.M.D.s responded that even though they do not utilize western medical technology for diagnosis, they believed the results of diagnoses by western medical technology. 3. 60.5% of O.M. and 93.3% of O.M.D. said that cooperative medical treatment system could be necessary for patients and it would be effective for control of diseases and 69% of western medical doctors and 99% of oriental medical doctors agreed that oriental medical practice would be more effective for cerebellar vascular accidents than other diseases. 77.4% of western medical doctors and 92.3% of oriental medical doctors responded that the students of two different disciplines have to be taught on the other disciplines. 82.6% of western medical doctors and 83.3% oriental medical doctors agreed that it would be necessary to have collaborative research between scientists in two disciplines. 81.5% of M.D.s and 93.3% of O.M.D.s believed that they had prejudice and distrust on other discipline 4.90% of the doctors were not satisfied with the government medical policies on health insurance, legal matters, and health delivery system. 5. 75.4% of M.D.s and 50.2% of O.M.D.s said that two medical disciplines should be integrated, but they were skeptical on that. 75.3% of M.D.s thought that western hospitals should employ O.M.D.s Finally this study recommended that western medical students study oriental medicine and the vice versa, and M.D.s and O.M.D.s should have seminars and workshops to exchange knowledge, and experiences. It is also recommended that medical laws be revised to allow medical doctors refer the patients whom they can not handle to oriental medical doctors and the vice versa.

• 대한기계학회논문집A
• /
• 제39권10호
• /
• pp.955-962
• /
• 2015

비커스 경도 시험은 모든 재료에 적용할 수 있으며, 경도 시험 중에서 가장 광범위하게 사용된다. 경도는 기계적 성질을 평가하는 하나의 확률변수로 볼 수 있다. 본 연구는 $ZrO_2$ 단상 세라믹스와 $TiO_2$ 첨가량에 따르는 $ZrO_2/SiC$ 복합 세라믹스의 굽힘강도와 비커스 경도의 통계적 성질을 조사하였다. 굽힘강도와 비커스 경도는 와이블 확률 분포를 잘 따랐다. 척도 및 형상 파라메터는 $ZrO_2$ 모재 세라믹스, $ZrO_2/SiC/TiO_2$ 모재 세라믹스 및 이들을 열처리한 세라믹스를 사용하여 평가하였다. 또한 압입하중의 증가에 따른 영향도 평가하였다.

• 한국대기환경학회지
• /
• 제20권6호
• /
• pp.783-792
• /
• 2004

In this study, a thick-film semiconductor odor gas sensor for the detection of $CH_3$SH was developed using SnO$_2$ as the main substrate and was investigated in terms of its sensitivity and reaction time. In the process of manufacturing the sensor, Taguchi's design of experiment (DOE) was applied to analyze the effects of a variety of parameters, including the substrate, the additives and the fabrication conditions, systematically and effectively. Eight trials of experiments could be possible using the 27 orthogonal array for the seven factors and two levels of condition, which originally demands 128 trials of experiments without DOE. The additives of Sb$_2$O$_{5}$ and PdCl$_2$ with the H$_2$PtCl$_{6}$ ㆍ6$H_2O$ catalyst were appeared to be important factors to improve the sensitivity, and CuO, TiO$_2$, V$_2$O$_{5}$ and PdO were less important. In addition, TiO$_2$, V$_2$O$_{5}$ and PdO would improve the reaction time of a sensor, and CuO, Sb$_2$O$_{5}$, PdCl$_2$ and H$_2$PtCl$_{6}$ㆍ6$H_2O$ were negligible. Being evaluated simultaneously in terms of both sensitivity and reaction time, the sensor showed the higher performance with the addition of TiO$_2$ and PdO, but the opposite results with the addition of CuO, V$_2$O$_{5}$, Sb$_2$O$_{5}$ and PdCl$_2$. The amount of additives were superior in the case of 1% than 4%. H$_2$PtCl$_{6}$ㆍ6$H_2O$ would play an important role for the increase of sensor performance as a catalyst.nce as a catalyst.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.359-359
• /
• 2011

This study reports the H2S gas sensing properties of CuO / ZnO nano-hetero structure bundle and the investigation of gas sensing mechanism. The 1-Dimensional ZnO nano-structure was synthesized by hydrothermal method and CuO / ZnO nano-heterostructures were prepared by photo chemical reaction. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) spectra confirmed a well-crystalline ZnO of hexagonal structure. In order to improve the H2S gas sensing properties, simple type of gas sensor was fabricated with ZnO nano-heterostructures, which were prepared by photo-chemical deposition of CuO on the ZnO nanorods bundle. The furnace type gas sensing system was used to characterize sensing properties with diluted H2S gas (50 ppm) balanced air at various operating temperature up to 500$^{\circ}C$. The H2S gas response of ZnO nanorods bundle sensor increased with increasing temperature, which is thought to be due to chemical reaction of nanorods with gas molecules. Through analysis of X-ray photoelectron spectroscopy (XPS), the sensing mechanism of ZnO nanorods bundle sensor was explained by well-known surface reaction between ZnO surface atoms and hydrogen sulfide. However at high sensing temperature, chemical conversion of ZnO nanorods becomes a dominant sensing mechanism in current system. Photo-chemically fabricated CuO/ZnO heteronanostructures show higher gas response and higher current level than ZnO nanorods bundle. The gas sensing mechanism of the heteronanostructure can be explained by the chemical conversion of sensing material through the reaction with H2S gas.

• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.305-314
• /
• 1991

This study was conducted to research the formation and the color development of NiO-ZnO-Fe2O3-TiO2-SnO2 system for the purpose of synthesizing the spinel pigments which are stable at high temperature. After preparing ZnO-Fe2O3 as a basic composition, {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.Fe2O3 system, {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.TiO2 system, and {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.SnO2 system were prepared with {{{{ chi }}=0, 0.2, 0.5, 0.7, 1 mole ratio respectively. The manufacturing was carried out at 128$0^{\circ}C$ for 30 minutes. The reflectance measurement and the X-ray analysis of these specimens were carried out and the results were summarized as follows. 1. In the specimens which included NiO, it was difficult for the spinel structure to be formed. 2. As increasing the contents of NiO and Fe2O3, all the groups which were yellow or green colored changed to brown. 3. NiO-ZnO-Fe2O3 system and NiO-ZnO-TiO2 system formed the spinel structure and the illmenite structure appeared in NiO-TiO2 system.