• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.213-219
• /
• 1994

The formations of spinel and colors of ZnO-Fe2O3-TiO2-SnO2 system have been researched on the basis of ZnO-Fe2O3 system. Specimens were prepared by substituting Fe3+, with Ti4+ or Sn4+ when mole ratios between Fe3+ and Ti4+ or between Fe3+ and Sn4+ were 0.2 mole. The reflectance measurement and X-ray diffraction analysis of the formation of spinel and the colors of there specimens were carried out. ZnO-Fe2O3 system in which Fe2O3 was substituted with SnO2 and TiO2 was formed the spinel structure of 2ZnO.TiO2, 2ZnO.SnO2, ZnO.Fe2O3. The stable stains which were colored with yellow and brown could be manufactured.

• 토지주택연구
• /
• 제15권1호
• /
• pp.147-156
• /
• 2024

본 연구는 시멘트 클링커 제조에 사용되는 탄산염 광물인 석회석(CaCO₃)을 CO₂가 결합되어 있지 않은 탈탄산 원료를 사용하여 제조 공정 중에 발생하는 CO₂를 저감하고자 하는 연구로 다양한 산업부산물 중 폐콘크리트에 부착되어 있는 시멘트페이스트를 이용하고자 하였다. 일반적으로 시멘트용 석회석은 최소한 CaCO₃의 함유량이 80% 이상(CaO, 44% 이상)의 것을 사용해야만 시멘트 클링커의 품질을 확보할 수 있다. 하지만 폐콘크리트 미분말의 CaO 함량은 평균 20% 정도로 시멘트 클링커 원료로 사용하기 위하여 CaO 함량을 35% 이상으로 조성비를 올려줘야 이용이 가능하다. 따라서 폐콘크리트 미분말의 조성 광물 경도차이를 이용하여 경도가 상대적으로 낮은 CaO 형태의 광물을 선택적으로 분쇄하여 분급 및 체가름을 할 경우 CaO 함량을 35% 이상 상승시킬 수 있다. 이에 본 연구에서는 분쇄 공정을 통해 경도가 상대적으로 낮은 CaO를 함유한 광물들을 선택적으로 분쇄하여 효율적으로 CaO와 SiO₂ 외 기타 성분을 분리하는 최적 조건에 대하여 실험적 및 통계적으로 검토·분석하였다. 시멘트 크링커 원료로서 탈탄산된 35% 이상 CaO를 함유한 폐콘크리트 미분말 제조를 위한 최적 분쇄 조건 실험 결과, 분쇄 시간 5분 이내, 피분쇄물 종류 30mm, 피분쇄물양 1.0 이상이 최적 조건인 것을 알 수 있었지만 단일 입도의 분쇄물이 아닌 혼합입도의 분쇄물에 대한 검토가 필요할 것으로 판단된다.

• 약학회지
• /
• 제17권1호
• /
• pp.41-43
• /
• 1973

Trace-amounts of Diptered and DDVP in fishes could be separated and identified by thin layer chromatography and gas chromatography with DEGS-H$_{3}$PO$_{4}$ column.

• 전기화학회지
• /
• 제13권1호
• /
• pp.40-44
• /
• 2010

In this work, highly uniform size-controlled $Cu_2O$ nanocubes can be successfully formed by means of pulse electrodeposition. The size distribution, crystal structure, and chemical state of deposited $Cu_2O$ nanocubes are characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The phase transition from $Cu_2O$ to Cu can be controlled by constant current electrodeposition as a function of deposition time. In particular, the size of the $Cu_2O$ nanocubes can be controlled using pulse electrodeposition as a function of applied current density.

• 대한화학회지
• /
• 제14권2호
• /
• pp.141-145
• /
• 1970

The reduction of Mo-thiocyanate (V) complex on dropping mercury electrode has been studied at ionic strength 0.6 with pH less than 2.3. D-C polarogram obtained from acidic solutions are reversible, diffusion controlled current. The electrode reaction of Mo-thiocyanate(V) may be represented as follows. $MoO(SCN)_3\;+\;2H^+\;+\;2e\;{\to}\;Mo(SCN)_2{^+}\;+\;H_2O\;+\;SCN^-$From this reaction, the half wave potential assumed to be $E_{1/2}\;=\;E_0'\;-\;0.059\;pH\;-\;0.03\;log{\;frac{[Mo(SCN)_2{^+}][SCN^-]}{[MoO(SCN)_3]}}$Considering the dissociation of this complex, however, it was estimated that the electrode reaction may be written by. $MoO^{+3}\;+\;3SCN^-\;+\;2H^+\;+\;2e\;{\to}\;Mo(SCN)_2{^+}\;+\;SCN^-\;+\;H_2O$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.360-360
• /
• 2011

We demonstrated the fabrication method of superhydrophobic nanocoating through a facile spin-coating and the chemical modification. The resulting coating showed a tremendous water repellency with a static water contact angle (CA) of 158$^{\circ}$ and a hysteresis of 1$^{\circ}$. The number of ZnO nanoparticle (NP) coating cycles affected on the surface roughness, which is key role for superhydrophobic surface, and thus the CA can be modulated by changing the ZnO NP coating cycles. The CA can be controlled by changing the carbon length of Self-Assembled Monolayers(SAM). This simple ZnO coating is substrate-independent including flexible surfaces, papers and cotton fabrics, which can effectively be used in various potential applications. We also observed the thermal and dynamic stabilities of SAM on ZnO nanoparticles. The superhydrophobicic surface maintained its superhydrophobic properties below 250$^{\circ}C$ and under dynamic conditions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.322-322
• /
• 2008

Low-temperature co-fired ceramics (LTCC) have turned out to be very promising technology in accordance with the rapid developments in semiconductor technology. The demands for compact electrical assemblies, smaller power loss as well as high signal density can be fulfilled by LTCC. And for the multi-layered ceramic devices with embedded passive components such as high dielectric constant decoupling capacitor, LTCC materials require the several conditions to avoid delamination and internal cracks. For the present study, diopside-based glass is chosen as the LTCC substrate material in view of its high coefficient of thermal expansion (CTE). From the experimental resultsn the influence of each element on the CTE change can be revealed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.263-266
• /
• 2003

The fine $YBa_2Cu_3O_x$ powder ($0.2{\sim}1.0\;{\mu}m$) is produced by sol-gel method, and electrophoresis deposition is used for the preparation of $YBa_2Cu_3O_x$ thick films which are deposited on Ag wire. The oriented $YBa_2Cu_3O_x$ was tried to be prepared by the zone-melting method under low oxygen partial pressure. The orientation and the phase composition were examined by the X-ray diffraction and the superconductivities were measured by 4 line method. The critical current densities are still quite low, which may be due to unsuitable technical parameters for zone-melting of $YBa_2Cu_3O_x$ thick films. Therefore the heat treatment condition and controlling of low oxygen partial pressure should be improved in the future experiment.

• Bulletin of the Korean Chemical Society
• /
• 제9권3호
• /
• pp.126-129
• /
• 1988

Lithium bonded complexes with $H_2O$ molecule were investigated theoretically by varying the substituent of lithium compound as follows; LiH, LiLi, $LiCH_3,\;LiNH_2$, LiOH, LiF, and LiCl. Some hydrogen bonded complexes with $H_2O$ molecule were also investigated to be compared with lithium bonded analogues. Electron correlation effect on the structures and energies of lithium bond was also investigated through MP2 and MP4 corrections. Unlike hydrogen bond with $H_2O$ molecule, lithium bonded complexes with $H_2O$ molecule were found to be interacting linearly with $H_2O$ molecule. Electron correlation effect was very small for lithium bonded complexes. The lithium bond energies were found to be less affected by the choice of substituent of lithium compound.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.532-538
• /
• 1998

한국산 천연베릴을 잉요하여 온도구배융제환류법에 의해 에메랄드($3BeO{\cdot}Al_2O_3{\cdot}6SiO_2:Cr^{3+}$) 단결정이 성장되었다. 리튬-몰리브데늄-바나디움 산화물계 융제는 $(MoO_3+V_2O_5)/Li_2O$, 와 $V_2O_5-Li_2O$를 서로 다르게 용융한 2종류의 융제를 혼합하여 제조하였다. 융제의 최적 조성은 산화몰리브데늄.바나디움에 대한 산화리튬의 몰비($(MoO_3+V_2O_5)/Li_2O$)가 3몰이었고 융제첨가제는 Li2O량에 대하여 $K_2O$ 또는 $Na_2O$를 0.2mole% 이내로 치환하였다. 베릴원료의 용융 농도는 융제량에 대하여 3~10% 함량이었고, $Cr_2O_3$ 발색제는 베릴량에 대하여 1%이었다. 융액은 용융, 성장, 회수 블록으로 나뉘어진 3지대 온도구배 결정성장로에서, $1100^{\circ}C$와 $1000^{\circ}C$ 사이의 안정상태에서 연속적으로 순환되도록 하였다. 에메랄드 단결정은 성장지대에서 950~$1000^{\circ}C$ 구간에서 1일 1회 2시간동안 열진동 처리하였을 때 미소핵의 생성이 억제된 대형 단결정을 성장시킬 수 있었다. 육각주상 에메랄드 단결정의 우선성장방향은 c(0001) 바닥면이었고, m(1010) 기둥면에 수직이었다.