• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.349-351
• /
• 2011

The formation of oxide superconducting phase fabrication of superconducting wire materials and fabrication of precise superconducting material were studied for developing superconductor application technique. The $ZrO_2$ addition reduced the particle size $BaZrO_3$ trapped in the matrix after the sintering growth. The added $ZrO_2$ was converted to fine particles of $BaZrO_3$ which is the conventional sintering temperature for YBaCuO, $Y_2Ba_1Cu_1O_5$ and CuO are formed as by products of the reaction between $ZrO_2$ and YBaCuO phase. The formation of highly $BaZrO_3$ particle appears to be responsible for the refinement of $BaZrO_3$ phase after the citric acid sintering process.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.682-683
• /
• 2006

Thermoelectric conversion efficiency of thermoelectric elements can be increased by using a structure combining n-type and p-type semiconductors. From the above point of view, attention was directed at ZnO as a candidate n-type semiconductor material and investigations were made. As the result, a dimensionless figure of merit ZT close to 0.28 (1073K) was obtained for specimens produced by the PCS (Pulse Current Sintering) method with addition of specified quantities of $TiO_2$, CoO, and $Al_2O_3$ to ZnO. It was found that the interstitial $TiO_2$ in the ZnO restrains the grain growth and CoO acts onto the bond between grains. The influence of the inclusion of $TiO_2$ and CoO onto the sintering behavior also was investigated.

• 한국벤처창업학회:학술대회논문집
• /
• 2022.04a
• /
• pp.129-134
• /
• 2022

This research investigates the effect of SMEs' digital transformation (DX) efforts in O2O platforms on customer engagement. Among the three DX stages (i.e., digitization, digitalization, and DX), this study focuses on digitalization, a practically viable DX phase for SMEs using O2O platforms. This study categorizes the DX efforts of SMEs into three: information diversity, responsiveness to customers, and the degree of functional use. To analyze the impact of these efforts on customer engagement, we conduct the zero-inflated negative binomial regression using the dataset of Naver Smartplace, one of the representative O2O platforms in South Korea. The analysis result confirms that all three factors have positive impacts on customer engagement. Therefore, this study demonstrates that employing O2O platforms can be an effective strategy for SMEs lacking resources to achieve successful DX.

• Asia pacific journal of information systems
• /
• v.32 no.3
• /
• pp.580-600
• /
• 2022

The purpose of this study is to investigates the effect of SMEs' digital transformation efforts in O2O platforms on customer engagement. This study focuses on digitalization, which is a practically viable phase for SMEs using O2O platforms among the three digital transformation stages (digitization, digitalization, and digital transformation). This study specifically categorizes digital transformation efforts into three categories: information diversity, responsiveness to customers, and the degree of functional use. To analyze the impact of these efforts on customer engagement, we conducted a zero-inflated negative binomial regression using the dataset provided by Naver SmartPlace, a representative O2O platform in South Korea. The results present that the positive relationship between these aforementioned factors and customer engagement. Thus, this study demonstrates that utilizing O2O platforms can be an effective strategy for SMEs that lack the resources to achieve a successful digital transformation.

• Applied Microscopy
• /
• v.29 no.1
• /
• pp.95-103
• /
• 1999

Microstructural observations on the pseudo-brookite $MgTi_2O_5$ and the similar type of $(In_{0.36}Zn_{1.09})Ti_2O_{5.64}$ were carried out using a top-entry HRTEM working at 200 kV. The modulated structures were found in $(In_{0.36}Zn_{1.09})Ti_2O_{5.64}$, however, not in $MgTi_2O_5$. The electron diffraction patterns of sublattice in $(In_{0.36}Zn_{1.09})Ti_2O_{5.64}$ are quite similar to those of pseudo-brookite $MgTi_2O_5$. but the complicated superlattice reflections are present in the diffraction patterns. Four types of modulations have been found. The periodicities for the modulated structure are found to be 3.63 nm, 0.79 nm and 0.64 nm along [220] direction, and 0.81 nm along [420] direction. The phase transition from the modulated structure to the unmodulated one was also observed in situ due to the electron beam irradiation reversibly. Further damage by the electron beam made the crystal to be fragmented into many small crystals with the formation of the voids at the kinks in ledged structure of the surface. The anisotropic arrangements of In and O atoms in $(In_{0.36}Zn_{1.09})Ti_2O_{5.64}$ might cause the compound to be unstable under the electron beam.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.1
• /
• pp.34-41
• /
• 2022

As the use of chemical products increases in daily life, the removal of dye waste has also emerged as an important environmental issue. This dye waste can be decomposed using a photocatalyst, and the photocatalyst can be synthesized very cost-effectively by using the sol-gel technology. The sol-gel technology is not only very useful for nanoscale film formation, but also can simply form multilayer structures. Using a multiple spin coating method, in this study, a ZnO film with a multilayered structure (3 layers, 5 layers) was formed by using zinc oxide (ZnO), which is effective in decomposing various dyes. For performance comparison, a ZnO film having a single layer structure by a single spin coating method was prepared as a control. Structural and elemental analysis of ZnO film was performed using an X-ray diffraction analyzer and an energy dispersive X-ray spectrometer. A nanowire-like surface morphology could be observed through a scanning electron microscope. Additionally, UV-Vis spectrophotometer was used to measure the absorbance of UV light. The ZnO film with a five-layer structure degraded the simulated methylene blue by 49% more than the ZnO film with a single-layer structure. In conclusion, it was found that ZnO having a multilayered structure is useful as a photocatalyst that decomposes methylene blue dye more effectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.8
• /
• pp.667-674
• /
• 2000

The stability of ZnO-Pr$_{6}$/O$_{11}$-CoO-Er$_{2}$/O$_3$based varistors was investigated with Er$_{2}$/O$_3$additive content of the range 0.0 to 2.0 mol%. All varistors sintered at 130$0^{\circ}C$ exhibited the thermal runaway within short times even under weak d.c. stress. As a result these varistors were completely degraded. On the contrary the stability of varistors sintered at 135$0^{\circ}C$ was far better than that of 130$0^{\circ}C$. In particular the varistors added with 0.5mol% Er$_{2}$/O$_3$ which the nonlinear exponent is 34.83 and the leakage current is 7.38 $mutextrm{A}$ showed a excellent stability which the variation rate of the varistors voltage the nonlinear coefficient and the leakage current is below 1%, 2%, and 3.5% respectively even under more severe d.c. stress such as (0.80 V$_{1mA}$9$0^{\circ}C$/12h)+(0.85 V$_{1mA}$115$^{\circ}C$/12h)+(0.90 V$_{1mA}$12$0^{\circ}C$12h) Consequently it is estimated that the ZnO-0.5 mol% Pr$_{6}$/O sub 11/-1.0 mol% CoO-0.5 mol% Er$_{2}$/O sub 3/ based varistors will be used to develop the advanced Pr$_{6}$/O$_{11}$-1.0 mol% CoO-0.5 mol% Er$_{2}$/O$_{3}$ based varistors will be used to develop the advanced Pr$_{6}$/O$_{11}$-based ZnO varistors having the high performance and stability in future. future.ure. future.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.388.1-388
• /
• 2001

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.860-863
• /
• 2007

ZnO nano film for transparent thin film transistors is prepared by injection type source delivery system of atomic layer deposition. By using this delivery system the source delivery pulse time can dramatically be reduced to 0.005s in ALD system. ZnO nanofilms obtained at $150^{\circ}C$ are characterized.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.6
• /
• pp.475-480
• /
• 2001

Glasses in he system CuO-P$_2$O$_{5}$ -Nb$_2$O$_{5}$ -Nb$_2$O$_{5}$ -V$_2$O$_{5}$ were prepared by a press-quenching method on the copper plate. the glass-ceramics from these glasses were obtained by post-heat treatment, and the crystallization behavior and DC conductivities were determined. The conductivities of the glasses were range from 10$^{-6}$ s.$cm^{-1}$ / at room temperature ,but the conductivities of the glass-ceramics were 10$^{-3}$ s.$cm^{-1}$ / increased by 10$^3$ order. The crystalline product in the glass-ceramics was CuV$_2$O$_{6}$ . the crystal growth of CuV$_2$O$_{6}$ phase increased with heat-treatment conditions. The linear relationship between il($\sigma$T) and T$^{-1}$ suggested that the electrical conduction in the present glass-ceramics would be due to a small polaron hopping(SPH) mechanism.