• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.276-283
• /
• 2016

Red mud is an inorganic by-product produced from the mineral processing of alumina from Bauxite ores. the development of alkali-activated slag-red mud cement can be a representative study aimed at recycling the strong alkali of the red mud as a construction material. This study is to investigate the optimum water content, compressive strength, moisture absorption coefficient and efflorescence of alkali-activated slag-red mud soil pavement according to the recycling fine aggregate content. The results showed that the optimum water content, moisture absorption coefficient and efflorescence area of alkali-activated slag-red mud soil pavement increased but the compressive strength of that decreased as the recycled fine aggregate content increased.

• Journal of the Korean Ceramic Society
• /
• v.30 no.4
• /
• pp.299-308
• /
• 1993

Dispersant was used to avoid the agglomeration of aluminum hydrate precipitate and improve the sinterability of calcined alumina powder. The mean particle size of the aluminum hydrate precipitates was 0.26${\mu}{\textrm}{m}$ and 0.44${\mu}{\textrm}{m}$ when ball-milled with and without dispersant, respectively. After calcination at 110$0^{\circ}C$ for 5 hours, the size of the alumina powder without dispersant increased to 0.84${\mu}{\textrm}{m}$, while with dispersant slightly decreased to 0.22${\mu}{\textrm}{m}$. The most thermally active alumina powder was obtained from the sample calcined at 110$0^{\circ}C$ for 5 hours with the 1% dispersant concentration. Using the calcined alumina powder at the above optimized condition, the specimen showed fired density of 3.94g/㎤, 4-point MOR of 364MPa, and KIC of 3.26MPam1/2 after sintered at 155$0^{\circ}C$ for 3 hours.

• Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.33-37
• /
• 2002

The two kinds of pellet-type red-mud adsorbents (bead-type, crushed-type) were from red mud, which is generated as a by-product during the production of aluminum hydroxide from bauxite ore. The adsorption experiments of Pb^{2+} ion in the aqueous solution by these red-mud adsorbents were studied with a continuous adsorption ccolumn. As a result, the crushed-type adsorbent shows better performance in adsorption of Pb^{2+} than the bead-type adsorbent between the two types of the pellet-type adsorbents. The continusous adsorption experiment shows that the pellet-type adsorbents made from red mud have good performance for removal of Pd^{2+}. The breakthrough curves of the red-mud adsorbents were compared with that of activated carbon.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.423-425
• /
• 2012

레드머드(Red mud)란 Bauxite 광물을 Bayer process 공정을 거쳐 알루미나를 정제하는 과정에서 발생하는 슬러리 형태의 산업폐기물이다. 레드머드는 pH 10-12.5 범위의 높은 알칼리성을 나타내며, 14-21 가지의 광물상을 함유하고 있다. 하지만 유가성 물질이 함유되어 있음에도 불구하고 적절한 처리 방법이 없어 폐기물로써 처리되어지고 있다. 레드머드의 처리 및 보관 부분에서 강우로 인한 지하수 오염, 처리 토지 면적 등과 같은 문제점이 다소 발생하여 효율적인 처리가 시급한 실정이다. 이로 인해 환경, 토목, 건설 등 다양한 분야에서 레드머드를 재활용하기 위해 활발히 연구가 진행되어 지고 있지만 재활용양이 발생량에 비해 극히 적다. 따라서 본 연구에서는 최종 처리되는 레드머드의 부피를 줄여 최종 처리 비용을 감소시키고자 레드머드에 함유되어 있는 유가성 금속 성분 중 $TiO_2$ 성분의 회수 방법 중 초음파를 방사하여 회수하는 방법을 알아보았다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.1
• /
• pp.130-137
• /
• 2018

Now discusses the potential use and applications of coal bed methane (CBM) in various industries. One of the options for gas monetization is gas to power (GTP), sometimes called gas to wire (GTW). Electric power can be an intermediate product, such as in the case of mineral refining in which electricity is used to refine bauxite into aluminum; or it can be an end product that is distributed into a large utility power grid. For stranded gas, away from the regional markets, the integration of the ammonia and urea plants makes commercial sense. These new applications, if established, could lead to a surge in demand for methanol plants.

• Journal of Environmental Science International
• /
• v.21 no.9
• /
• pp.1059-1068
• /
• 2012

The purpose of this study was to develope the environmentally favorable method of roller compacted soil concrete pavement using industrial waste red mud. Red mud was the major solid waste produced in the process of alumina extraction from bauxite(Bayer process). For recycling purpose, red mud was treated and applied to use as concrete admixtures. To this end, laboratory test such as compressive strength of soil concrete, and field test such as construction characteristics of soil concrete pavement, had been conducted. From the study results, the compressive strength of soil concrete was strongly related to its matrix proportion and compaction energy. The optimum mix proportion was comprised of cement 300 $kg/m^3$, water 110 $kg/m^3$, fine aggregate 600 $kg/m^3$, course aggregate 1400 $kg/m^3$, red mud admixture 50 $kg/m^3$ and compaction energy above 2.86 $cm-kgf/m^3$. The $7^{th}$-day and $28^{th}$-day mean compressive strength of soil concrete were 43.8 MPa and 53.3 MPa each under the optimum condition. Pavement application of soil concrete using red mud admixture indicated that the proposed method was simple in case of construction and showed a good surface texture.

• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.38-46
• /
• 2006

The removal of arsenic(V) using four different natural minerals were evaluated. Parameters like contact time, pH, adsorbent dosages, and As(V) concentration were optimized. The kinetics of adsorption was observed to be fast and reached equilibrium within 2h. As(V) adsorption on studied minerals was dependent on pH and followed a pseudo-second-order reaction model. For kaolin, maximum adsorption was found at pH 5.0. Whereas, in case of other three minerals, a pH range of 6.0-7.0 was found to be the best for As(V) adsorption. The maximum adsorption capacity (Q) was calculated by fitting Langmuir equation to the adsorption isotherms obtained under a specified condition. From the slope of best fit, the Q values were calculated to be 2.07, 2.15, 1.95 and 0.86 mg As(V)/g of bauxite, wad, iron ore and kaolin, respectively. Desorption of As(V) from loaded materials was dependent on the type of leaching reagents used. Based on the results, it was found that among the studied natural minerals, wad was the best As(V) adsorbent.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.313-314
• /
• 2013

The study carried out the experiment with presenting as the fundamental data for developing non-cement by using red mud generated in blast furnace slag and bauxite generated in the process of manufacturing the pig iron process of manufacturing Al(OH)₃/Al₂O from as the binding material using the accelerator of NaOH. After fixing the thing and the NaOH adding the blast furnace slag and NaOH 10, 20, 30 (%) with 10, 20, 30 (%) substituted the red mud in the blast furnace slag and the experimental method carried out the experiment. And it measured the flexural strength and compressive strength and took a photograph EDS analysis and SEM. Consequently, the compressive strength was improved as the addition rate of the NaOH was high and the compressive strength according to the replacement ratio of the red mud was degraded. This is determined that film of the blast furnace slag is destroyed and it makes the hydration reaction condition and the intensity is revealed.

• Korean Journal of Metals and Materials
• /
• v.46 no.7
• /
• pp.437-442
• /
• 2008

The synthesis and hydration of Calcium Sulfo Aluminate[$3CaO{\cdot}3Al_2O_3{\cdot}CaSO_4(C_4A_3{\overline{S}})$, CSA cement utilizing secondary steelmaking refining slags is studied for recycling the discarded steel plant wastes to meet the environmental requrations imposed on the steel industry. Raw materials of secondary refining slag, lime sludge, gypsum and bauxite were prepared to be sintered at $1,250^{\circ}C$. The sintered samples were hydrated for 1, 3 and 7 days to evaluate the mineralogical and physico-mechanical properties. The hydration products evaluated with the aid of SEM and XRD analyses confirmed the formation and the continuing growth of ettringite phase with the further hydration times, which plays a role in developing the early strength and the expansion properties of cements. The physico-mechanical properties of hydrated CSA products employing the recycled steelmaking refining slags determined in terms of compressive strength and linear expansion of hydrated products are found to be superior to those of the Ordinary Portland Cement(OPC) or the other commercial CSA cements.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.93-94
• /
• 2023

Through the industrial revolution that began in the 18th century, the amount of carbon dioxide in the atmosphere increased rapidly as humans used fossil energy such as coal and oil as fuel for steam engines and factory machines. The amount of carbon dioxide emitted while producing cement, the main material of concrete used in construction, is large enough to account for 5-8% of the world's carbon dioxide emissions. In this study, Non cement-based matrix were used to reduce carbon dioxide emissions from cement production. Red mud is an industrial by-product generated in the manufacturing process of aluminum hydroxide using bauxite, and more than 120 million tons are produced worldwide. In addition, red mud is a porous material that can be physically adsorbed, and causes a photocatalytic reaction of TiO₂ to remove harmful substances such as nitrogen oxide formaldehyde in the air and chemically adsorbs ammonia and hydrogen sulfide. Therefore, this study aims to examine the physical properties of the matrix by mixing red mud, an industrial by-product with good adsorption performance, into the Non cement-based matrix.