• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.1-11
• /
• 2013

Reducing the energy that consumed by tag is a key requirement for the wider acceptance of the active RFID systems that use battery constrained tags. When the reader is not interrogating, the active RFID standard protocols try to reduce energy consumption of tags by using sleep mode. On sleep mode tags is active by receiving a specific signals from reader, until tag receive a sleep mode command from the reader, a tag waste energy for remaining in RX mode. Overhearing is a state of a tag in which it wastes energy for maintaining active RX state while there is no frame destined to it. According to our analysis, the amount of energy consumed by a tag due to overhearing is several time larger than that consumed by the effective communication. We propose RANO(Reservation Aloha for No Overhearing) that is designed to inform a tag of its effective communication intervals to eliminate overhearing problem in active RFID communication. The performance of the proposed protocol was evaluated through the real world by changing the number of tags and size of data. The result of an experiment, the proposed protocol performed saving about 22 times less than the standard protocol did.

• Journal of the Korean Ceramic Society
• /
• v.49 no.6
• /
• pp.659-662
• /
• 2012

Yttrium (Y) and niobium (Nb) doped spherical $Li_4Ti_5O_{12}$ were synthesized to improve the energy density and electrochemical properties of anode material. The synthesized crystal was $Li_4Ti_5O_{12}$, the particle size was less than $1{\mu}m$ and the morphology was spherical and well dispersed. The Y and Nb optimal doping amounts were 1 mol% and 0.5 mol%, respectively. The initial capacity of the dopant discharge and charge capacity were respectively 149mAh/g and 143 mAh/g and were significantly improved compared to the undoped condition at 129 mAh/g. Also, the capacity retention of 0.2 C/5 C was 74% for each was improved to 94% and 89%. It was consequently found that Y and Nb doping into the $Li_4Ti_5O_{12}$ matrix reduces the polarization and resistance of the solid electrolyte interface (SEI) layer during the electrochemical reaction.

• Resources Recycling
• /
• v.18 no.6
• /
• pp.18-23
• /
• 2009

An investigation on the synthesis of aluminum citrate, one of the aluminum organic compounds, has been performed using aluminum chloride solutions as a starting material. For the synthesis of aluminum citrate, citric acid was added to aluminum solutions with the mole ratio of citric acid to aluminum to be 2.5 and aluminum citrate synthesized was also characterized in terms of chemical analysis, X-ray diffraction, particle size measurement and SEM analysis. As a result, it was found that the ratio of ethanol/Al solution more than 4.0 was required for the synthesis of aluminum citrate from aluminum solutions. Furthermore, the pH should be controlled to be more than 7.0 in order to obtain the recovery of aluminum citrate higher than 97%. From the chemical analysis of aluminum citrate synthesized in this work, the content of $NH_4$, Al and C was found to be 17.0, 4.01 and 25.7%, respectively. Accordingly, the aluminum citrate synthesized from aluminum solutions was confirmed to be $(NH_4)_5Al(C_6H_4O_7)_2{\cdot}2H_2O$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.9
• /
• pp.833-841
• /
• 2016

The 200 W electrically powered unmanned aerial vehicle, which is studied in this research, uses solar cells, a fuel cell and batteries as the main power source simultaneously. The output of each power source performs power control for each power source by the active power control method so that an adequate capacity of the battery could be maintained while limiting the maximum output of the fuel cell. The output variation for each power source under the active power control method was identified through an integrated ground test. In addition, the effect of limiting the maximum output of the fuel cell on the output variation of the entire system was experimentally identified, and it was confirmed that the adequate maximum output value of the fuel cell for preventing the overdischarge of six series-connected, small size batteries for fuel cell systems is 150 W.

• Journal of KIISE:Databases
• /
• v.37 no.3
• /
• pp.165-170
• /
• 2010

This paper proposes an in-network join strategy SBJ(Semi & Bloom Join), an efficient join strategy for sensor networks, that minimizes communication cost. SBJ is a hybrid join strategy that can reduce energy consumption by using a bloom filter to reduce the size of data that needs to be sent or received in sensor network. The key to reducing the communication cost in SBJ is to eliminate data not involved in the join result in the early stages of join processing. Through simulation, the paper shows that compared to other join strategies in sensor network, SBJ join strategy is more efficient in reducing the communication cost resulting in a significant reduction in battery consumption.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.56-61
• /
• 2009

The dissolution of domestic aluminum hydroxide of 99.7% purity has been performed with mineral and organic acid prior to the synthesis of aluminum compounds from aluminum solution. Mean particle size of aluminum hydroxide used in the work was $14.4{\mu}m$, $22.9{\mu}m$ and $62.3{\mu}m$, respectively and the effect of reaction temperature, concentration of acid and reaction time on the dissolution of aluminum hydroxide has been examined. As a result, the dissolution of aluminum hydroxide was increased with the concentration of HCl and more than 70% dissolution was obtained with 5 mole/l HCl at $70^{\circ}C$ for reaction time of 4 hr. As far as the dissolution of aluminum hydroxide with sulfuric acid was concerned, it was found that the optimum concentration of sulfuric acid was about 6 mole/l for the effective dissolution of aluminum hydroxide. When oxalic acid was used for the dissolution of aluminum hydroxide, nearly complete dissolution could be obtained by the dissolution for 16 hr with 1.0 mole/l oxalic acid at $90^{\circ}C$.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.54-59
• /
• 2011

An investigation on the synthesis of aluminum tartrate, one of the aluminum organic compounds, has been performed using aluminum chloride solution as a raw material. For this aim, the effect of the ratio of ethanol/Al solution and pH on the synthesis of aluminum tartrate has been examined and aluminum tartrate synthesized has also been characterized in terms of the chemical composition, X-ray diffraction pattern, particle size distribution, and SEM analysis. As a result, the synthesis more than 97% could be obtained under the conditions of pH more than 3.0 at the ratio of ethanol/Al solution of 3.0. From the chemical analysis of aluminum tartrate synthesized in this work, the content of $NH_4$, Al and C was found to be 9.10, 4.83 and 25.8%, respectively. In addition, aluminum tartrate synthesized from the aluminum chloride solution was found to be $(NH_4)_3Al(C_4H_4O_6)_3$.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.675-687
• /
• 2010

Structural Health Monitoring (SHM) is the science and technology of monitoring and assessing the condition of aerospace, civil and mechanical infrastructures using a sensing system integrated into the structure. Impedance-based SHM measures impedance of a structure using a PZT (Lead Zirconate Titanate) patch. This paper presents a low-power wireless autonomous and active SHM node called Autonomous SHM Sensor 2 (ASN-2), which is based on the impedance method. In this study, we incorporated three methods to save power. First, entire data processing is performed on-board, which minimizes radio transmission time. Considering that the radio of a wireless sensor node consumes the highest power among all modules, reduction of the transmission time saves substantial power. Second, a rectangular pulse train is used to excite a PZT patch instead of a sinusoidal wave. This eliminates a digital-to-analog converter and reduces the memory space. Third, ASN-2 senses the phase of the response signal instead of the magnitude. Sensing the phase of the signal eliminates an analog-to-digital converter and Fast Fourier Transform operation, which not only saves power, but also enables us to use a low-end low-power processor. Our SHM sensor node ASN-2 is implemented using a TI MSP430 microcontroller evaluation board. A cluster of ASN-2 nodes forms a wireless network. Each node wakes up at a predetermined interval, such as once in four hours, performs an SHM operation, reports the result to the central node wirelessly, and returns to sleep. The power consumption of our ASN-2 is 0.15 mW during the inactive mode and 18 mW during the active mode. Each SHM operation takes about 13 seconds to consume 236 mJ. When our ASN-2 operates once in every four hours, it is estimated to run for about 2.5 years with two AAA-size batteries ignoring the internal battery leakage.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.4
• /
• pp.269-277
• /
• 2019

In this paper, the compatibility analysis on the track record operation center for the regional industry upbringing is presented. The renewable energy sources such as solar, wind and battery energy storage system have been widely spread in these days. Also the requirements on the efficiency, reliability and power demands of these distributed systems are increasing and they can be demands on the construction of the data track record center for renewable energy industries in order to promote the local industries. The analysis on the size of the de-centralized power system are performed based on the technical issues. The necessities, requirements and center goals to meet these missions are presented in the following session. The proposal of the 1 MW operation center construction and operations are presented in the result of the compatibility analysis. And the lists of the required equipments in the operation facilities are suggested to have proper operational capabilities. The results of this research can be applied in the fundamental data to promote the regional renewable industries.

• Journal of Advanced Navigation Technology
• /
• v.26 no.1
• /
• pp.35-45
• /
• 2022

In this paper, we modeled the devices used easily in PV system circuits. In addition, for full operation of the photovoltaic system, a complete operation system for the DC-DC buck-boost converter and the MPPT control system was modeled and simulated to confirm good operation. we were constructed an actual system with the same conditions in the simulation and experimented. The purpose is to confirm the stable power supply through the load leveling by presenting the PCS considering ESS of photovoltaic power generation. we will do study to apply hybrid capacitors that have high energy density to the same size compared to the EDLC to DVR. As a result, we proposed a single-phase 3 kW grid-connected solar power converter.