• 에너지공학
• /
• 제20권2호
• /
• pp.109-122
• /
• 2011

온실가스배출억제와 수입원유저감을 위하여 전 전기자동차의 도입이 활발하게 추진되고 있다. 이의 항속거리 연장을 위한 리튬이온 이차전지 소재와 공정개발 등의 연구개발 동향, 그리고 양산체제 구축 중에 있는 리튬이온 이차전지 메이커의 계획도 조사하였다. 완성차메이커와는 수평분업적인 협력관계가 형성되고 있음을 볼 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.495-503
• /
• 2011

The sealed nickel-metal hydride (Ni-MH) secondary battery are primarily used as energy storage for the HEV. But, the research on Ni-MH battery has focused on anode materials. In the present study, we investigate to improve the electrochemical characteristics of Ni-MH batteries using the surface treatment of $Ni(OH)_2$ cathode by CoOOH. Surface treated $Ni(OH)_2$ cathode showed significant improvement in the activation behavior, rate capability, charge retention, and cycle life of the batteries were significantly improved. In addition, the surface treated electrode exhibited the higher overvoltage for oxygen evolution than the untreated electrode. This phenomenon indicates that the charge efficiency can be improved by suppressing the oxygen evolution on cathode.

• 전자통신동향분석
• /
• 제36권3호
• /
• pp.76-86
• /
• 2021

Technologies for lithium secondary batteries are now increasingly expanding to simultaneously improve the safety and higher energy and power densities of large-scale battery systems, such as electric vehicles and smart-grid energy storage systems. Next-generation lithium batteries, such as lithium-sulfur (Li-S) and lithium-air (Li-O₂) batteries by adopting solid electrolytes and lithium metal anode, can be a solution for the requirements. In this analysis of battery technology trends, solid electrolytes, including polymer (organic), inorganic (oxides and sulfides), and their hybrid (composite) are focused to describe the electrochemical performance achievable by adopting optimal components and discussing the interfacial behaviors that occurred by the contact of different ingredients for safe and high-energy lithium secondary battery systems. As next-generation rechargeable lithium batteries, Li-S and Li-O₂ battery systems are briefly discussed coupling with the possible use of solid electrolytes. In addition, Electronics and Telecommunications Research Institutes achievements in the field of solid electrolytes for lithium rechargeable batteries are finally introduced.

• 한국인터넷방송통신학회논문지
• /
• 제17권5호
• /
• pp.199-208
• /
• 2017

리튬 폴리머 배터리는 높은 안전성, 빠른 충전 및 긴 라이프 사이클 등으로 인해 에너지 저장치(ESS: Energy Storage System), 전기자동차(EVs: Electric Vehicles)등에 채택이 되어 사용되고 있으며, 그리고 현재는 농업용 드론에서 까지 사용이 되고 있다. 그러나 리튬 폴리머 배터리는 과충 방전에는 리튬-이온 배터리 내의 격차구조가 파괴되어 배터리 수명이 줄어들게 되며, 과충 방전을 방지하기 위해 불균등한 셀 전압을 균등 제어 할 수 있는 셀 밸런싱 시스템이 필수적이다. 본 논문은 각 셀의 충 방전할때의 전압차이를 검출하여 불균형된 셀을 확인하여 비선형 시스템에 적합한 퍼지 제어기를 개발하여 적용한 셀별 밸런싱 알고리즘을 제안한다. 본 논문은 농업용 드론의 배터리팩의 셀 밸런싱을 퍼지제어를 하여 셀 간 균등 제어를 위해 설계하였으며, 최종 결과로 셀 간 밸런싱이 잘 되는지 확인하고 자 셀이 2개 있을 때와 6개 그리고 최종적으로 12개의 각 셀 밸런싱이 되는지를 확인하였다. 이는 다른 제품에도 사용할 수 있는지를 실험하고자 하였으며, 확인결과 사용된 셀의 개수와는 관계없이 셀별 밸런싱이 잘 되고 있음을 확인하였다.

• 대한기계학회논문집A
• /
• 제40권10호
• /
• pp.895-900
• /
• 2016

리튬 이온 배터리의 잔존수명 추정은 품질보증, 운전계획, 교체주기 파악 등을 위해 활용된다는 점에서 그 필요성이 점점 커지고 있다. 본 논문에서는 에너지 저장 장치용 배터리의 잔존 수명을 단일지수 용량열화 모델과 마코프체인 몬테카를로(MCMC) 방법을 이용하여 추정한 결과를 제시한다. MCMC방법은 사전 정보가 제대로 주어지지 않았을 때, 추정결과가 모델 초기값과 입력 설정값에 따라 크게 변하게 되는 단점이 있어, 실제 현장에서 배터리 모델과 추정법에 익숙하지 않은 사용자가 활용하는데 어려움이 있다. 이러한 어려움을 극복하기 위해, 본 논문에서는 베이지안 추론법의 이론식을 전역 탐색하여 구한 이론값과 MCMC 추정값을 비교해서, 초기값과 설정값을 결정하는 과정을 제안한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.66-67
• /
• 2014

Stabilization of the DC bus voltage is an important task in DC-AC microgrid system with renewable energy source such as solar system. A battery energy storage system (BESS) has become a general solution to stabilize the DC-bus voltage in DC-AC microgrid. This paper develops the analog BESS controller which requires neither computation nor dc-bus voltage measurement, so that the system can be implemented simply and easily. Even though others methods can stabilize and control the DC-bus voltage, it has complicated structure in control and low adaptive capability. The proposed topology is simple but is able to compensate the solar source variation and stabilize the DC-bus voltage under any loads and distributed generation (DG) conditions. In addition, the design of analog controller is presented to obtain a robust system. In order to verify the effectiveness of the proposed control strategy, simulation is carried out by using PSIM software.

• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.347-352
• /
• 2013

Four types of electrolyte were tested for the application as an electrolyte in the Zn-Br redox flow battery. Electrolyte was consist of $ZnBr_2$ (electrolyte number 1), $ZnBr_2+KCl$ (electrolyte number 2), $ZnBr_2+KCl+NH_4Br$ (electrolyte number 3) and $ZnBr_2+KCl+EMPBr(C_7H_{16}BF_4N)$ (electrolyte number 4). The each electrolyte property was measured by CV (cyclic voltammetry) method. The different between the potential of anodic and cathodic maximum current density in a CV experiment (${\Delta}E_P$) was 0.89V, 0.89V, 1.06V and 0.61V for the electrolyte number 1, 2, 3 and 4, respectively. The electrolyte involved KCl increased conductivity which was appeared by anodic and cathodic maximum current density in a CV experiment. It was estimated that the electrolyte of number 3 ($ZnBr_2+KCl+NH_4Br$) and number 4 ($ZnBr_2+KCl+EMPBr$) could be suitable as an electrolyte in the Zn-Br redox flow battery with non-appeared bubble, non-Br formation and high anodic-cathodic maximum current density.

• 조명전기설비학회논문지
• /
• 제25권9호
• /
• pp.26-32
• /
• 2011

The object of this paper is to optimize the battery system for supplying stably power in separate house in which a PV-wind hybrid power generation system is applied. In a power system to be used in a stand alone, it is very important to build optimize the electrical storage system and to utilize it for supplying stably output voltage when there is a shortage of the power generation capacity or there is no sunshine, or when power is to be supplied with a load. This paper provides an optimized method to evaluate capacity of battery by analyzing advantages and disadvantages of the existing battery evaluating method being used in each company for supplying stably power in separate house utilizing the new renewable energy such as a light of the sun.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.167-168
• /
• 2017

This paper investigates to identify an optimal for analysis of battery behavior in system-level applications such as Battery Energy Storage Systems in Smart Grid infrastructures and Electrical vehicles. At system level applications, it is mandatory to check model for meaningful equivalency and practical ability for extension from unit cell to Battery stack. The investigation of current battery models in relation to their suitability for study and analysis of system level applications of battery helpful for identification of optimal model and it also provides an intuition and direction to develop the most suitable model, if such models are not available already.

• 전력전자학회논문지
• /
• 제22권6호
• /
• pp.535-542
• /
• 2017

This paper proposes a simple 3-level interleaved charger-discharger for the uninterruptible power supply (UPS) with various combinations of battery cells. The proposed converter not only improves charging and discharging efficiency, but also reduces the physical volume and the cost. Furthermore, the converter also offers the capability of the neutral point voltage, so that more stable operation can be obtained. In addition, the proposed converter significantly reduces the ripple current of the battery inductor, thereby providing an expected life extension of the battery. Experimental results for a 300kVA UPS prototype verify the validity of the proposed converter. The proposed charger-discharger is suitable for UPSs and energy storage systems (ESSs) with wide input battery voltage ranges.