• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권8호
• /
• pp.432-441
• /
• 2000

It is difficult to analyze the charging characteristics of the lead-acid battery, because of the influences by various non-linear and time-variant parameters. In this study, the charging characteristics of high capacity industrial lead-acid battery 630 Ah was investigated through experiments with respect to the variations of temperature and the aged state of battery during the charging process. The database of those characteristics is established from the results of experiments, and the fuzzy logic charging algorithm is suggested using them. The results of experiment shows that the industrial lead-acid batteries can be always fully charged within the saved charging time by the proposed charging control algorithm adapting to the variations of charging condition. This new charging concept will be useful for developing the advanced battery charger improving the efficiency of storing electricity.

• 전력전자학회논문지
• /
• 제18권6호
• /
• pp.507-514
• /
• 2013

In this paper, the proposed charging algorithm is converted from the charging mode to compensate the transient state in the solar battery charging system. The maximum power point tracking (MPPT) control methods and the various charging algorithms for the optimal battery charging are reviewed. The proposed algorithm has excellent transient characteristics compare to the previous algorithm by adding the optimal control method to compensate the transient state when the charging mode switches from the constant current mode to the constant voltage mode based on the conventional constant-current constant-voltage (CC-CV) charging algorithm. The effectiveness of the proposed method has been verified by simulations and experimental results.

• 한국위성정보통신학회논문지
• /
• 제12권4호
• /
• pp.95-99
• /
• 2017

식 구간에서 인공위성이 필요로 하는 모든 전력을 공급하는 배터리의 수명은 인공위성의 수명과 직결된다. 배터리의 수명은 배터리 충전 방식에 의해 영향을 받으므로, 배터리 충전을 제어하는 전력제어유닛은 배터리 수명을 고려하여 설계되어야 한다. 배터리 충전은 낮 구간에서 태양전지로부터 생성된 전력을 전력제어유닛의 충전 전류 제어를 통해 이루어진다. 계절마다 다른 식 구간의 빈도를 고려하고 배터리 과충전 방지를 위하여 배터리 충전관련 변수들은 계절에 따라 각각 다르게 설계되어야 한다. 또한 충전 시 과전류 충전과 과전압 충전을 방지하기 위해 배터리 충/방전 상태, 충전전류 양, 배터리 전압, 배터리 용량, 배터리 온도, 배터리 셀 전압 등을 모니터링 하여 충전 전류를 제어한다. 인공위성에서는 각 조건을 반영하여 충전 전류를 제어하는 tapering 방식을 사용한다. 본 논문에서는 tapering 충전 방식을 적용한 인공위성 전력제어유닛의 배터리 충전 알고리즘을 설계한다. 설계된 알고리즘을 위성에 업로드 할 수 있는 코드로 변환하고 구축된 위성환경에서의 시험을 통해 동작을 검증한다.

• Journal of Electrochemical Science and Technology
• /
• 제9권3호
• /
• pp.184-194
• /
• 2018

In this paper, we propose a rapid-charging system for the lithium-ion battery (LIB) packs used in electric forklifts. The battery offers three benefits: reduced charge time, prolonged battery life, and increased charging efficiency. A rapid-charging algorithm and DC/DC converter topology are proposed to achieve these benefits. This algorithm is developed using an electrochemical model, which controls the maximum charging current limit depending on the cell voltage and temperature. The experimental use of a selected 18650 LIB cell verified the prolongation of battery life on use of the algorithm. The proposed converter offers the same topological merits as a conventional resonant converter but solves the light-load regulation problem of conventional resonant converters by adopting pulse-width modulation. A 6.6-kW converter and charging algorithm were used with a forklift battery pack to verify this method's operational principles and advantages.

• 조명전기설비학회논문지
• /
• 제29권9호
• /
• pp.96-102
• /
• 2015

This paper presents battery charging method using 3-phase AC-DC boost converter. General battery charging method is that charging the battery voltage to the reference voltage according to the constant current(CC) control, when it reaches the reference voltage, charging the battery fully according to the constant voltage(CV) control. However, battery chaging time is increased because of the battery impedance, constant current charging section which shoud take the large amount of charge is narrow, and constant voltage charging section which can generate insufficient charge is widen. To improve this problem, we proposes the method to reduce the charging time according to the SOC(State of Charge) estimation using battery impedance.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.736-744
• /
• 2012

In this paper, a battery charging system for Plug-in Hybrid Electric Vehicle (PHEV) and Electric Vehicle (EV), and operation algorithm of charging system are introduced. Also, the proposed charging system uses commercial electricity in order to charge the battery of parked PHEV and 48V battery charging system with power factor controllable single phase converter for PHEV is investigated in this paper. This research verifies the power factor control of input and the converter output controlled by the charge control algorithm through simulation and experiment.

• 전력전자학회논문지
• /
• 제19권2호
• /
• pp.149-156
• /
• 2014

This paper proposes the battery charging algorithm for small-scale wind power generator using three phase PWM converter. it is impossible to control output power of the converter in over wind speed region since back EMF of PMSG is higer than battery voltage. Therefore, battery charging algorithm is proposed to expand battery charging over wind speed region. The suggested method is using the q-axis current for battery charging in the rated wind speed region. In the over wind speed region after it lower back EMF of PMSG using d-axis current it can control output power of the converter. The validity of the proposed algorithm are verified by experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.548-551
• /
• 2000

The battery charger for high speed trail car is very important power source for the purpose of safty and system stability. it provides control power of VVVF, CVCF, DC/DC converter and inverter for traction motor. This paper included power circuit of the ZVZCS type battery charger for high speed trail car and battery included power circuit of the ZVZCS type battery charger for high speed trail car and inverter for traction motor. This paper included power circuit of the ZVZCS type battery charger for high speed trail car an battery charging algorithm. Also the optimum parallel operation of 50Kw battery charger for high speed trail car and charging control method of Ni-Cd battery illustrates validity and effectiveness through the experiments.

• 항공우주시스템공학회지
• /
• 제17권6호
• /
• pp.144-148
• /
• 2023

항공기 배터리는 항공기의 엔진 시동 전원 및 비상 전원을 공급하는 역할을 하는 핵심 장비이다. 배터리는 안정적인 전원 공급을 위해 언제나 충분한 용량을 보장하도록 충전되어야 하며 높은 신뢰성을 유지해야 한다. T-50 계열 항공기 배터리는 -18 ℃ 이상의 낮은 온도에서 엔진을 최대 2회 시동할 수 있도록 설계하였으나, 겨울철에 엔진 시동에 실패하는 현상이 간헐적으로 발생하였다. 이에 본 논문에서는 배터리의 저온 충전 시 발생하는 실패 현상에 대하여 분석 및 시험을 수행하고 이를 바탕으로 충전 알고리즘을 개선하였다. 또한 저온시동 모사시험을 수행한 결과 저온에서의 배터리 충전 결함이 해결되었으며 충전 성능 향상이 확인되어 새로운 알고리즘의 개선을 확인하였다.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1211-1222
• /
• 2018

This study presents a power distribution control scheme for a three-phase interleaved parallel DC/DC converter in a battery energy storage system. To extend battery life and increase the power equalization rate, a control method based on the nth order of the state of charge (SoC) is proposed for the charging and discharging processes. In the discharging process, the battery sets with high SoC deliver more power, whereas those with low SoC deliver less power. Therefore, the SoC between each battery set gradually decreases. However, in the two-stage charging process, the battery sets with high SoC absorb less power, and thus, a power correction algorithm is proposed to prevent the power of each particular battery set from exceeding its rated power. In the simulation performed with MATLAB/Simulink, results show that the proposed scheme can rapidly and effectively control the power distribution of the battery sets in the charging and discharging processes.