Algorithm for Improving the Efficiency of Storing Electricity using Experiments of Charging Characteristics for Industrial Lead-Acid Battery

산업용 연축전지의 충전특성실험에 근거한 축전효율 개선 알고리즘

  • 박윤호 (국방품질연구소) ;
  • 전순용 (동양대 시스템제어공학부) ;
  • 서보혁 (경북대 공대 전자전기공학부·)
  • Published : 2000.08.01

Abstract

It is difficult to analyze the charging characteristics of the lead-acid battery, because of the influences by various non-linear and time-variant parameters. In this study, the charging characteristics of high capacity industrial lead-acid battery 630 Ah was investigated through experiments with respect to the variations of temperature and the aged state of battery during the charging process. The database of those characteristics is established from the results of experiments, and the fuzzy logic charging algorithm is suggested using them. The results of experiment shows that the industrial lead-acid batteries can be always fully charged within the saved charging time by the proposed charging control algorithm adapting to the variations of charging condition. This new charging concept will be useful for developing the advanced battery charger improving the efficiency of storing electricity.

Keywords

References

  1. Y. C. LIANG and T. K. NG, 'Design of battery charging system with fuzzy logic controller', Int. J. Electronics, vol. 75, no. 1, pp. 75-86, 1993 https://doi.org/10.1080/00207219308907089
  2. C. M. Liaw and S. J. Chiang, 'Design and Implementation of a Single-Phase Three Wire Transformerless Battery Energy Storage System', IEEE Transactions on Industrial Electronics, vol. 41, no. 5, October 1994 https://doi.org/10.1109/41.315273
  3. Ming-Tsung Tsai, Chin-E Lin, Senior Wen-Inne Tsai, and Ching-Lien Huang, 'Design and Implementation of Demand-side multi-function battery energy storage system', IEEE Transactions on Industrial Electronics, vol. 42, no. 6, December 1995
  4. Deyuan Fan and Ralph E. White, 'A Mathematical Model of a Sealed Nickel-Cadmium Battery', IEEE Transactions on Energy Conversion, vol. 7, no. 1, March 1992
  5. Yoon-Ho Kim and Hoi-Doo Ha, 'Design of Interface Circuits with Electrical Battery Models', IEEE Transactions on Industrial Electronics, vol. 44, no. 1, pp. 81-86, February 1997 https://doi.org/10.1109/41.557502