• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.1
• /
• pp.94-101
• /
• 2004

The gross composition, gross amino acid content, apparent ileal amino acid digestibility and apparent ileal digestible amino acid content from 64 commercially produced meat and bone meals were statistically analysed. The samples were produced by 22 plants over a 2.5 year period with eight plants using batch dry rendering and 14 plants using low temperature rendering. A linear model with method and time of year (period) as fixed effects, plant within method as a random effect and sheep percent as a covariate was fitted to the composition data. The majority of the variation in the gross composition, amino acid digestibility and digestible amino acid content was explained by differences between plants using the same method. Neither rendering season nor origin of the raw materials contributed significantly to the observed variation in meat and bone meal protein quality. Rendering method (low temperature or batch rendering) had a significant effect on the variation observed in gross fat content, gross energy content, pepsin nitrogen digestibility, protein solubility and total lanthionine content. The digestibility of a number of amino acids and the apparent digestible content of arginine, cysteine, aspartic acid, proline and hydroxyproline were also significantly affected by rendering method. On average, batch dry and low temperature rendering systems produce meat and bone meals of similar nutritional quality. The variation between plant and within plant, however, is large, indicating that purchasing meat and bone meal from the same plant does not guarantee a consistent quality.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.133-140
• /
• 2018

In this paper, we develop an automated software for in-plane structural analysis of composite laminated structures. The developed software supports various failure criteria and reports the analysis results considering user's convenience. It also provides batch job analysis function based on parallel processing technique. To verify the performance of the software, we compared margin of safety(MS) calculated in the software to those obtained from in-house method and the specimen experiment. As a result of comparisons, there was an error of less than 0.01 in the in-house method and it is within about ${\pm}10%$ with the specimen experiment. In addition, we confirmed the improvement of execution speed of batch job analysis based on parallel processing technique.

• Journal of the Korea Convergence Society
• /
• v.8 no.4
• /
• pp.9-18
• /
• 2017

UAVs began to be actively applied to so-called 3D jobs, including the autonomous exploration, investigation, mapping, search and rescue, etc. since the mid-2000s. With this global trend, having a precise controllability of the UAV will certainly revolutionize the life of the modern human in the aspect of tremendous applications of the UAV. In the first part, a simplified dynamic model of the UAV identified using system identification techniques is compared with the previously built time-discrete linear model. In the second part, the three parameters of the dynamic model are estimated using the batch and RLS methods. Angular acceleration data of the quadrotor UAV at the hovering maneuver are analyzed and shown to be converging at all time. Also, according to the quadrotor flight data from both experiments and MATLAB simulations, the batch estimation method turns out to be more accurate than the RLS estimation method based on the comparison of final parameter values.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2418-2425
• /
• 2021

Monazite is a phosphate mineral that contains thorium (Th) and rare earth elements. The Th concentration in monazite can be as high as 500 ppm, and it has the potential to be used as fuel in the nuclear power system. Therefore, this study aimed to conduct the techno-economic analysis (TEA) of Th extraction in the form of thorium oxide (ThO₂) from monazite. Th can be extracted from monazite through an alkaline fusion method. The TEA of ThO₂ production studied parameters, including raw materials, equipment costs, total plant direct and indirect costs, and direct fixed capital cost. These parameters were calculated for the production of 0.5, 1, and 10 ton ThO₂ per batch. The TEA study revealed that the highest production cost was ascribed to installed equipment. Furthermore, the highest return on investment (ROI) of 21.92% was achieved for extraction of 1 ton/batch of ThO₂, with a payback time of 4.56 years. With further increase in ThO₂ production to 10 ton/batch, the ROI was decreased to 5.37%. This is mainly due to a significant increase in the total capital investment with increasing ThO₂ production scale. The minimum unit production cost was achieved for 1 ton ThO₂/batch equal to 335.79 $/Kg ThO₂.

• Journal of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.483-494
• /
• 1988

The adsorption behavior of aromatic acids on Amberlite XAD-4 resin was investigated by measuring the distribution coefficient by batch method. The adsorption of solutes on XAD-4 was affected by the several factors such as, analyte concentration, the pH of solution and concentration of pairing ion. The enhanced adsorption of solutes on XAD-4 in the presence of tetraalkylammonium salt as an ion pairing reagent, referred to as ion interaction, was suggested to follow a double layer model where the pairing ion occupies a primary layer at the adsorbent while the solute anion and other anions in the system comlpete for the secondary layer. Therefore, the ability of an ion pairing reagent to enhance solute adsorption depended significantly on the type and concentration of counter-ion and co-anion accompanying the ion pairing reagent or salt used for ionic strength control. In addition, a good linear relationship between the logarithm of capacity factors measured by batch and elution method as a function of the concentration of ion pairing reagent and methanol can be used to predict the retention in elution method on the basis of capacity factors measured by batch method.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.2
• /
• pp.205-212
• /
• 2009

Solution copolymerization of Styrene(St.) with 2-Hydroxypropylacrylate(2-HPA) was carried out with Benzoylperoxide(BPO) as an initiator in toluene at $80^{\circ}C$ in a batch reactor. Reaction volume and reaction time were 0.3 liters, 8 hours respectively. The time to reach steady state was about the six time. The monomer reactivity ratios, $r_1$(St.) and $r_2$(2-HPA) were determined by both the Kelen-Tudos method and the Fineman-Ross method ; $r_1$(St.)=0.376(0.330), $r_2$(2-HPA)=0.408(0.778). The activation energy of thermal decomposition was in the range of $33{\sim}55kcal/mol$.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.5
• /
• pp.641-646
• /
• 2003

An accurate and efficient method for measuring the mass of hairy roots using conductometry is established. A conductivity equation expressed in terms of the concentration of the ion species in the medium is suggested. By using this equation, the effect of the individual ions on the total conductivity can be quantitatively analyzed. An equation for the in situ estimation of the cell growth coefficient for determining the mass of hairy roots is established based on measurements of the nitrogen concentration and conductivity during cultivation. The proposed equation does not require preliminary experiments to determine the cell growth coefficient. Instead, the physiological characteristics of the plant species are reflected by introducing the cellular nitrogen content. Since the cell growth coefficient is determined by measuring the major ionic nutrient concentrations, it is more effective to express the dynamics of an actual culture system. This improved method for determining the mass of hairy roots was successfully utilized in a fed-batch culture system.

• Journal of Environmental Health Sciences
• /
• v.28 no.3
• /
• pp.49-54
• /
• 2002

This study was conducted to evaluate the feasibility and characteristics of poly acrylamide (PAA) immobilized sludge as a microbial entrapment bead for wastewater treatment. In the PAA method of immobilized sludge, it was found that the optimum acrylamide concentration for actual wastewater treatment was to be 12%. When the sequencing batch reactor (SBR) was operated during 30 days, removal efficiencies of TOC and phosphate was 95% and 70ft, respectively. From this research, repeated cycle of anaerobic and aerobic conditions is required to enhance the removal of TOC and phosphate. During the operation, immobilized cells could be used without being disrupted.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.146-153
• /
• 2011

Silver nano-particles have been synthesized by liquid phase reduction method and alcohol reduction process. Silver nano-particles of the size 30 ~ 40 nm were formed successfully by alcohol reduction process. The formation, structure, morphology and size of silver nano-particles have been studied using FE-SEM, TEM, XRD, UV-visible spectroscopy. In particular high dispersion stability of the synthesized silver nano-particles could be obtained by PVP binding. Antibacterial activity of Ag/PET master batch sample made from its nano-silver particles showed excellent antibacterial activity against S. aureus and E. coli.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.4
• /
• pp.387-394
• /
• 2010

The influent COD of municipal wastewater has been divided into 4 fractions; readily soluble biodegradable, slowly particulate biodegradable, soluble and particulate unbiodegradable COD. The mathematical modeling of biological wastewater treatment processes and the design and operation of nutrient removal plants require a reliable and accurate estimate of the composition of influent wastewater COD. COD utilization rate is proportional to the oxygen uptake rate(OUR), so a batch biodegradation test with OUR measurement has been effectively used for the determination of COD fractionation. But the mathematical model of COD utilization and heterotrophs synthesis is essential to interpret the OUR measurement. Mamais method is another method for determining readily biodegradable soluble COD. Like the OUR test method, batch biodegradation test is necessary but it does not require mathematical model. These two methods for determining COD fractionation are introduced here in detail. Experimental results showed that COD composition by Mamais method is not different to that by OUR test method so, either of them can be used.