• Journal of the Korean Graphic Arts Communication Society
• /
• v.6 no.1
• /
• pp.59-66
• /
• 1988

One of the rising problems in the field of environmental engineering is the eutrophic phenomenon which appears in the closed water basin. This study is the elimination orthophosphate by adsorption, which is indispensible nutritive element for eutrophication Ziriconium(IV) oxide hydrate-activatedcarbon complex. which has excellent adsorptivity for orthophosphate and can easily be reused after desorption process has been made and used as adsorbents. The main purpose of this study is to obtain intraparticle diffusivity which is basic data for the design of adsorption operation the experimental results were as follows. 1. Optimum condition which gave maxinum adsorption of orthophosphate was ph5 2. Equilibrium adsorption showed good consistency with Freundlich type. q=10.80C1/2.08 3. Pore diffusivity and surface diffusivity obtained the kinetic experiment of batch adsorption were respectivity 5.38 and 2.06 ($\textrm{cm}^2$/sec)

• BMB Reports
• /
• v.30 no.1
• /
• pp.7-12
• /
• 1997

The kinetics of the interesterification of triolein and stearic acid catalyzed by immobilized Rhizopus delemar lipase were studied in a batch operation. In order to clarify the mechanisms of this reaction, three models are discussed under various conditions in terms of the ratio of triolein and stearic acid. The rate constants involved in the proposed model were determined by combining the numerical Gauss-elemination method, and the trial-and-error method so as to fit the calculated results with the experimental data. The accuracy of the obtained rate constants was confirmed after they were substituted for simultaneous differential equations and the equations simulated using an adaptive step-size Runge-Kutta method. Finally, the model which agrees with the calculated results and the experimental data was selected.

• Advances in environmental research
• /
• v.1 no.2
• /
• pp.143-151
• /
• 2012

Nitrate removal from aqueous solution was investigated using $ZnCl_2$ and phosphoric acid activated carbon developed from pomegranate peel with particle size 0.4 mm. Potassium nitrate solution was used in batch adsorption experiments for nitrate removal from water. The effects of activated carbon dosage, time of contact, and pH were studied. The equilibrium time was fond to be 45 min. Two theoretical adsorption isotherms namely Langmuir and Freundlich were used to describe the experimental results. The Langmuir fit the isotherm with the theoretical adsorption capacity ($q_t$) was fond 78.125 mg g-1. Adsorption kinetics data were modeled using the pseudo-first, pseudo-second order, and intraparticle diffusion models. The results indicate that the second-order model best describes adsorption kinetic data. Results show activated carbon produced from pomegranate is effective for removal of nitrate from aqueous solution.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.416-420
• /
• 2018

A comprehensive kinetic study has been conducted on dimethyl carbonate synthesis by transesterification reaction of ethylene carbonate with methanol. An alkali base metal (KOH) was used as catalyst in the synthesis of DMC, and its catalytic ability was investigated in terms of kinetics. The experiment was performed in a batch reactor at atmospheric pressure. The reaction orders, the activation energy and the rate constants were determined for both forward and backward reactions. The reaction order for forward and backward reactions was 0.87 and 2.15, and the activation energy was 12.73 and 29.28 kJ/mol, respectively. Using the general factor analysis in the design of experiments, we analyzed the main effects and interactions according to the MeOH/EC, reaction temperature and KOH concentration. DMC yield with various reaction conditions was presented for all ranges using surface and contour plot. Furthermore, the optimal conditions for DMC yield were determined using response surface method.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.51-60
• /
• 1996

This research was performed for the fundamental data using a advanced treatment process of piggery wastewater. Characteristics of influent wastewater was divided with various methods in fixed biofilm batch reasctor. Fractons of organic were divided into readily biodegradable soluble COD(Ss), slowly biodegradable COD(Xs), nonbiodegradable soluble COD($S_I$), and nonbiodegradable suspended COD($X_I$). Experimental results were summerized as following : i) biodegradable organics fraction in piggery wastewater was about 88.1 percent, and fraction of readily biodegradable soluble COD was about 66.1 percent. ii) Fractions of nonbiodegradable soluble COD was 11~12 percent, and soluble inert COD by metabolism was producted about 6~8 percent. iii) Active biomass fraction of attached biofilm was about 54.7 percent, and substrate utilization rate and maximum specific growth rate of heterotrophs were $8.315d^{-1}$ and $3.823d^{-1}$, respectively.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.494-499
• /
• 2001

The present work investigates the possible use of fly ash for the removal of heavy metal ions from aqueous solutions. Batch experiments were conducted and the influences of metal concentration, pH, and fly ash concentration were investigated. Heavy metals used in these studies were zinc, lead and cadmium. Adsorption studies were done over a range of pH values (3-10) at $25^{\circ}C$ and heavy metal concentrations of 10-400 mg/L using fly ash concentrations of 10, 20 and 40 g/L. Experiments were also conducted without fly ash to determine the extent of heavy metal removal by precipitation. Kinetic and equilibrium experiments were performed and adsorption data were correlated with both Langmuir and Freundlich adsorption models. The results indicate that fly ash can be used as an adsorbent for heavy metals in the aqueous solutions, yet the degree of removal depends on the pH.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.96-98
• /
• 2002

Furnace slag, a steel industry waste, has been converted into an inexpensive and efficient adsorbent. The product obtained has been utilized for the removal of arsenic from ground water. Kinetic studies have bepn described with the mechanism of adsorption The results from batch studies showed that the As(III) can be removed from the ground water within the pH range 3-7 However the maximum removal was experienced at pH 7.0. Equilibrium was attained within 24 hours. Adsorption data of arsenic correlate well with the Freundlich and Langmuir adsorption models. The maximum sorption capacity as calculated using Freundlich adsorption isotherm was found to be of 0.004 mg g-1 at pH 7 and $25^{\circ}C$.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.122-124
• /
• 2002

The removal capacity of zero-valent iron for Cr(Ⅵ) was evaluated using batch kinetic tests. The rate constants for zero-valent iron dramatically increased as initial Cr(Ⅵ) concentration decreased. Generally, the reaction rates of Cr(Ⅵ) with zero-valent iron were faster than that of a biotic degradation of Cr(Ⅵ), and furthermore the reaction rates were inversely proportional to the initial Cr(Ⅵ) concentrations. After certain reaction time elapsed. no further decrease of Cr(Ⅵ) was observed, indicating a loss of iron reactivity. The loss of iron reactivity was primarily due to the passivation of iron surfaces with iron-Cr precipitates, but the reactivity of iron was recovered by adding iron-reducing bacteria. Even though the addition of bacteria itself removed Cr(Ⅵ), the combination of iron-reducing bactera and oxidized iron significantly enhanced the reaction rate for Cr(Ⅵ) removal. The results from column tests also confirmed that the innoculation of iron-reducing bacteria to the column containing completely oxidized iron partially enhanced the recovery of the iron reactivity.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.3 no.3
• /
• pp.3-18
• /
• 1993

본 논문에서는 박테리아에서 생성되는 생체 계면활성제인 emulsan의 생산을 위한 유가식 배양에서 에칸을 농도의 제어에 퍼지기법을 적용하였다. 기절저해가 있는 유가식 배양에서 emulsan의 생산을 향상시키기 위해 최대 비성장속도를 갖는 최적 기질농도가 유지되도록 기질인 에탄올의 공급 속도가 조절되어 졌다. 생물반응기에서 Acunetobacter calcoaceticus RAG-1 박테리아를 회분식과 유가식으로 배양 실험하여 최적 에탄올 농도를 구하고, kinetic 모델을 제시하였다. 배양실험의 결과와 지식을 바탕으로 퍼지 규칙을 구성하였다. 퍼지 제어기에서 제어 입력변수는 기질농도의 최적치와 운전치의 오차와 오차의 변화로서 구성되고, 제어 출력변수는 기질 공급 속도의 변화량으로 구성되었다. 멤버쉽 함수를 입력변수의 퍼지 집합화 과정을 통하여 구하였고, 최소-최대법과 무게 중심법을 이용하여 출력 제어값을 구하였다. 유가식 배양의 전산모사와 실험 결과에서 퍼지제어 기법은 최적 기질 농도를 정확히 제어하였으며, emulsan 생산은 향상되었다.

• Journal of Life Science
• /
• v.16 no.6
• /
• pp.938-941
• /
• 2006

Continuous fermentation process for the production of soluble glucan using mutant Agrobacterium sp. ATCC31750 has been developed in this research. When the concentration of soluble glucan was higher than 6 g/l, the viscosity of the fermented broth was too high and it needs complex separation process to separate from culture broth. Mathematical models which describe the cell growth and glucan production was developed and they kinetic parameters were estimated with experimental data. They are used for the optimization of continuous fermentation process and calculate optimal dilution rate for easy separation of glucan 4 g/l. With continuous fermentation, glucan production rate was increased 1.8 times more than that with batch fermentation.