• The International Journal of Costume Culture
• /
• v.8 no.2
• /
• pp.97-104
• /
• 2005

In this research, the fit of basic dresses was examined, by analyzing and comparing the satisfaction of fitness of basic dresses made by the draping method on a custom-made replica body form and that of a basic dress made by the flat pattern method. Basis dresses were produced by the draping method for each 52 subjects using custom-made body forms, and another kind basic dresses for each subjects were produced by the flat pattern method using measurements of body sizes. Both basic dresses received high scores for the satisfaction of fit, but the basic dresses produced by draping method received higher scores. Thus it is expected to produce a more successful fit by draping a basic dress on a custom-made body form. Future research using more subjects might confirm these results. A more concrete analysis through using additional satisfaction tests could be conducted. For example, each subject might also serve as an evaluator to rate her satisfaction of fit wearing each of the two custom-made dresses. Finally, examining various body forms is suggested.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.94-105
• /
• 2021

This study analyzes the shape change of the breast according to the replica combination method of the lower cup and suggest a pattern construction for the end use purpose. To provide appropriate brassiere patterns to each individual who has various 3D shape characteristics, the ways of layout of 3D replicas were investigated as well as evaluated subjectively and objectively. As for experimental brassieres, basic replicas from the mold cup of long-run brassiere were combined into five different ways to find the appropriate lower brassiere cup pattern. Eighteen women wore experimental brassieres and their breasts were analyzed using the Geomagic Design X program (3D System, Inc., Korea). As result, the pattern that matched the vertexes of the four pieces of the replica and naturally spread the bottom part was best for raising and pushing toward the inside breasts. The fit was good in the case of a pattern in which the convex portions overlapped both sides of the four replica pieces where the vertexes and the bottom part naturally spread apart. The subjects were able to differentiate comfortably fitted brassieres and highly functional brassieres.

• Health Policy and Management
• /
• v.11 no.1
• /
• pp.37-61
• /
• 2001

In the course of this research, we developed FRIS(Food Replica Information System), which calculates calories and nutrient values of foods in a very simple and interesting manner, and experienced of application to some communities. We expect that individuals will have opportunities to raise their consciousness of food, nutrients, and healthy living by participating in FRIS. 154 kinds of commonly consumed Korean foods were selected and one serving sized food replicas, having the same shapes, size, and color as the real foods, were constructed with attached bar code labels. An application program with food replicas and bar code was also developed in order to provide information on calories and nutrient values for people's meals or selected foods based on survey results of housewives' requirements related to foods and nutrients. FRIS should be a basic tool in nutrition education and consultation. Its applicability would vary according to the nutritionist's flexibility and contents of developed application programs. Technical stability should be strengthened and more useful contents of application prograln be added to spread the use of the system. Additionally, in future research, more delicate models should be developed and an analytical method should be applied to examine the effects of FRIS to individual behavioral changes in their eating habits.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.452-456
• /
• 2016

In this paper, a dual-channel readout amplifier array is realized in a standard $0.18{\mu}m$ CMOS technology for the applications of panoramic scan LADAR systems. Each channel consists of a PIN photodiode with 0.9 A/W responsivity and a 1.0 Gb/s readout amplifier(ROA). The proposed ROA shares the basic configuration of the previously reported feedforward TIA, except that it exploits a replica input to exclude a low pass filter(LPF), thus reducing chip area and improving integration level, and to efficiently reject common-mode noises. Measured results demonstrate that each channel achieves $70dB{\Omega}$ transimpedance gain, 829 MHz bandwidth, -22 dBm sensitivity for $10^{-9}BER$, -34 dB crosstalk between adjacent channels, and 45 mW power dissipation from a single 1.8 V supply.

• Journal of the Korea Society for Simulation
• /
• v.6 no.1
• /
• pp.85-96
• /
• 1997

Designing and constructing a proper simulator for real power plants requires extensive research in human engineering and computer science and integration of different fields of technologies such as system analysis, operational knowledge for nuclear plant, etc. A full scope replica type simulator for nuclear power plant is developed. The simulator has the same feature and operational functions as one in the main control room (MCR) of a reference power plant. The simulator provides the necessary training to recover or reduce damages from accidents that usually are unpredictable. This paper describes the configurations and characteristics for the simulator that is developed for Younggwang Nuclear Power Plant #3,4 which is the basic model of the Korean Nuclear Power Plant. The paper also describes technical aspects of Auto Code Generator that is used for developing the simulator. The successful development of the simulator will contribute to improve safety in operation of nuclear power plants.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.399-403
• /
• 2004

Education of clothing and textiles in the university is various according to the purposes. Among that clothing construction and practice is what is needed the most in understanding the process of apparel producing, and is the basic subject of areas from apparel designs to quality management. Producing apparel starts from planning the bodice pattern according to the human body shape. Basic bodice pattern should be highly practical so that production of all items of apparel patterns can be possible. Also, a basic bodice pattern needs to be planned in the way that even beginners can use it by classifying sizes according to each body measurements. Thus in this study. bodice patterns will be produced in way of draping method subjecting university students in early 20s. standardized and classified sizes will be calculated from it and bodice pattern made by studied flat pattern method will be examined and compared so that finally suitability will be compared. As a result of examining and comparing bodice patterns made by draping method and studied flat pattern method on the model of the human body produced by plaster method, sizes were classified into 5 levels. As a result of evaluation of creation. satisfying consequence from various body shape was acquired and it is expected of the beginners who are stating from clothing construction and practice to be educated by using the result of this study.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.5
• /
• pp.434-444
• /
• 2012

The purpose of this study was to develop children-friendly education materials based on food replicas for the dietary education of lower grade elementary students. Through a literature review on current dietary problems and dietary education for children, five education themes were chosen: balanced diet, seasonal food, traditional food, noodle culture, and making instant noodles. A total of 304 key food items for food replicas were selected based on the themes: six basic food groups (113 items), balanced meals (37 items), dietary habits (74 items), spring foods (13 items), summer foods (17 items), autumn foods (16 items), winter foods (11 items), Korean traditional foods (52 items), Korean native noodles (18 items), noodles from foreign countries (19 items), and making instant noodles (46 items). Next, a food replica database was developed consisting of name of the food, picture, size, ingredient, recipe, reference, and attached code. Powerpoint slides and teaching plans for all education themes were developed utilizing the food replicas in order to raise interest and understanding of serving size and intake amount. This research provides a basis for the development of food replicas as effective dietary education materials for elementary students and their use in extra-curricular activities, after school programs, community health centers, or food companies.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.122-131
• /
• 1995

The research trends for metal matrix composites have been on basic mechanical properties, fatigue behavior after aging and fractographic observations. In this study, the fatigue crack initiation as well as the fatigue crack growth behavior and the fracture mechanism were investigated through observations of the fracture surface on silicon carbide particles reinforced aluminum metal matrix composites(SiCp/Al). Based on the fractographic study done by scanning electron microscope and replica, crack growth path model and fracture mechanism are presented. The mechanical properties, such as the tensile strength, yield strength and elongation of SiCp/Al composites are improved in a longitudinal direction, however, the fatigue life is shorter than the basic Al6061 alloys. From fractographic observations, it is found that the failure mode is ductile in basic Ai6061 alloys. And because some SiC particles were pulled out from the matrix and a few SiC particles could be seen on the fracture surface of SiCp/Al, crack growth paths are believed to follow the interface of the matrix and its particles.

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.170-185
• /
• 2013

The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.

• International Journal of Costume and Fashion
• /
• v.3
• /
• pp.13-24
• /
• 2003

The purpose of this study was to examine the changes brought by the upper body form using a three-dimensional human body measurement the gypsum method. The developed plane figure was constructed using paper replica to analyze the dimensional shape of the upper torso and to be able to design clothes suitable for elderly women's physical characteristics. The characteristics are analyzed and compared with existing patterns in order to extract the components for the pattern design. The examination was carried out based on the developed plane figures of upper body surface replicas. Type 1, the bent-forward body form, has a wide gap on the shoulder. In Type 2, the gap of waist line was wide at angulus scapulae point. Type 3 was the thin body form, and the girth of the chest, front interscye breadth and back interscye breadth were more level with one another, compared to the other types. In Type 4, the bent-backward body form, there was a wide gap on front shoulder. Comparison with the developed plane figure and existed pattern, items revealed differences in significance included the front and back interscye width between the measured values of the existed patterns and the developed plane figure. Therefore, the basic components of basic bodice pattern for old women were determined in the up-bust circumference and length of the back.