• Applied Microscopy
• /
• v.33 no.3
• /
• pp.195-204
• /
• 2003

The Experimental calibration method has been investigated to correct d-spacing estimation and to identify phases in the electron diffraction data acquired by imaging plates. When the diffraction data from the imaging plate was corrected by the d-spacing calibration method with the radial intensity distribution plotting in this experiment, The accuracy of d-spacing estimation was significantly increased in errors of about 0.5%. The experimental calibration equation followed up the first order exponential decay function was derived from the trace of d-spacing deviation between the measured and the calculated values. It was applied to the analysis of d-spacing and the phase identification of the transitional phases formed from [001] gibbsite specimen by electron beam irradiation effect. In this case more accurate phase identification and d-spacing evaluation is possible for the transitional phases whose diffraction patterns are complicatedly superimposed. It is concluded that ${\chi}$-alumina, ${\gamma}$-alumina and ${\sigma}$-alumina are clearly identified as the major transitional phases formed from gibbsite by electron beam irradiation for 120 min.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.842-850
• /
• 2003

The suspension insulators are subjected to harsh environments in service for a long time. The long-term reliability of tile insulators is required for both mechanical and electrical performances. This study describes some basic performance tests and accelerated aging test by cool-heat cycling methods and thermal mechanical performance test methods on alumina porcelain insulators (new and aged) used for transmission line in KOREA. There was no fail in electrical and mechanical performance tests such as a high voltage strength, a flashover voltage, and an impact strength in all samples. But in the case of accelerating aging tests which have above 9$0^{\circ}C$ temperature gradient, fracture phenomena was happened by a thermal shock in tile aged sample(sample A) with low alumina porcelain body. It was indicated that sample A was more severely aged than other samples. According to results of HRB test and microstructural analysis, it was reasoned that insulator bodies with the matrix reinforced with alumina crystalline phase have advantages over the suppression of crack advance. And cool-heat aging and mechanical thermal ageing tests shows that a temperature gradient is more effective to accelerating than a cycling number.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.11
• /
• pp.1575-1578
• /
• 2003

An environmentally benign approach for the synthesis of 2-substituted-4,6-diaryl pyrimidines using inorganic solid supports for its catalytic role as well as an energy transfer medium is described. The methodology eliminates the usage of solvent during the reaction. The reaction time is brought down from hours to minutes along with yield enhancement. The rate enhancement and high yield is attributed to the coupling of solvent free conditions with microwaves. Further, the role of base is studied in the reaction and it is concluded that microwave assisted basic alumina catalysed reaction is the best in terms of catalysis as well as reaction time and yield.

• Macromolecular Research
• /
• v.16 no.2
• /
• pp.149-154
• /
• 2008

UV-curable electrolytes inks were prepared by dissolving [2-[(methacryloyloxy)ethyl]dimethyl]propylaminium bromide (MEPAB), 1,5-[bis(2-methacryloxyethyl)dimethyl ammono]penthane dibromide (MDAPD), hexafunctional reactive oligomer (SP1013), trimethylolpropane triacrylate (TMPTA) and a photoinitiator in methanol/2-methoxyethanol. The compositions of the electrolyte inks were MEPAB/MDAPD/SP1013/TMPTA=6/24/17.2/12.8, 15/15/17.2/12.8 and 24/6/17.2/12.8. Humid-membranes were deposited on a gold electrode/alumina electrode using an ink-jet printer equipped with a UV lamp followed by immediate UV curing. The humidity-sensing characteristics including hysteresis, frequency and temperature dependence, response time and water durability were estimated.

• Composites Research
• /
• v.34 no.5
• /
• pp.330-336
• /
• 2021

Alumina powder is one of the widely used materials for industry, but there is a problem that the strength of the product changes depending on the powder packing state. To solve the above problem, previous studies have been conducted to increase the particle packing efficiency, but most of the existing studies analyzed the packing characteristics of millimeter-scale particles, so the physical properties are different from those of the micrometer scale. It is difficult to apply to the micrometer scale. In this paper, a three-step experiment was performed using a statistical method to increase packing using micrometer-scale alumina powder. First, a size combination with high packing and a mixing ratio were selected using the mixture test design method, and an appropriate excitation frequency was selected by analyzing the height change according to the frequency change in the vibration test apparatus. Finally, an alumina powder packing experiment was performed based on the experimental results mentioned above. As a result, it was confirmed that the maximum height variation was 42% higher than the maximum value of the 155 measurements performed when selecting the packing size combination. It is thought that this study will serve as basic data for processing and packing research using fine powder.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.57-65
• /
• 2019

In this study, the quality characteristics of the mother material of panel were evaluated for the production of moss panel using alumina cement and biological characteristics and environmental impact characteristics of moss panel were evaluated. The ratio of W/B 10%, Vs/Vm 20% and foaming agent 0.5% were selected as the basic mixing ratio for the mother panel of moss panel through pretest and SAP was added to improve the moisture content of panel. The optimal mixing ratio of SAP was considered to be less than 0.5% considering the quality characteristics. Also, through the use of alumina cement, the pH of the panel could be lowered to 10~11. The panel was able to improve the surface roughness through the foaming agent, and it was confirmed that the SAP had an effect of improving the moisture content of the panel. For the environmental impact characteristics of the moss panel, the moss panel evaluated the carbon dioxide reduction performance and the fine dust cleaning performance.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.1
• /
• pp.80-85
• /
• 2004

This study was performed to provide basic quality characteristics data of Kimchi by storage containers that will be applied for Kimchi storage container development of new material. In all storage containers, pH was decreased with increased storage days, while acidity was increased with increased storage days, The changes of pH and acidity by storage containers were alumina < stainless < bio < plastic. Salt content was same to all containers. In all storage containers, reducing sugars of Kimchi at first were 22.65${\pm}$0.04$\^$a/ mg/mL. But as these of alumina, stainless, bio and plastic at storage after 31 days were 11.18${\pm}$0.15$\^$a/ mg/mL, 5.39${\pm}$0.02$\^$b/, 3.74${\pm}$0.10$\^$c/, and 3.14${\pm}$0.02$\^$d/ mg/mL, respectively. The hardness, cohesiveness and gumminess of Kimchi by storage containers decreased with increased storage days. And the changes ratio of these were alumina < stainless < bio < plastic. The desirable organoleptic characteristic such as sourness, fresh cabbage taste and firmness were long time maintained at alumina container A significant evidence was detected that the alumina container showed less quality change than that of bio, stainless and plastic containers as storage days increased.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.100-105
• /
• 1995

The aim of this study is to developed water proofing properties of cement mortar this study the effect of mix proportion on the basic characteristics of cement mortar was investigated. Also water absorption and permeability properties of mortar using several admixtures were tested. from this results, Physical properties of mortar is improved by using the sand witch has a broad particle size distribution. Also the sililca alumina powder is effective for decreasing the water permeability of mortar and zinc stearate is in creasing the water repellence property.

• Clean Technology
• /
• v.3 no.2
• /
• pp.87-93
• /
• 1997

A new process has been developed for nitrate and other salts removals from polluted waters. Alumina cement and calcium oxide served as precipitating agents to remove nitrate with stirring at basic pH. Low content of alumina in the commercialized alumina cements resulted in a increasing in nitrate removal yield. It is found that the compositions of aluminium and calcium are the most important factors in successful nitrate insolubilization. In order to remove high concentration of nitrate in polluted water, multi-stage precipitation was found to be very effective. Sulfate, chloride, and phosphate ions as well as nitrate were also removed by the precipitated reaction. After precipitation, post-treatments including Na2CO3 addition and neutralization with acid alleviated the level of aluminium and calcium in the treated water.

• Applied Chemistry for Engineering
• /
• v.2 no.1
• /
• pp.1-11
• /
• 1991

Xenon-129 NMR technique has been developed since 1980 as a new method for the characterization of microporous materials such as zeolites, activated carbons and alumina by using chemical shift and linewidth variations in $^{129}Xe$ NMR of adsorbed xenon gas. This NMR technique has been known to be very effective to probe the locational and the chemical changes of the supported metallic species as well as the physicochemical change of the support material. Recently, this method has been successfully applied for the characterization of amorphous materials such as activated carbons, silica and alumina. Basic principles, experimental techniques and recent applications of the $^{129}Xe$ NMR method for the study of heterogeneous catalysts are introduced in this paper.