• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2003.10a
• /
• pp.22-34
• /
• 2003

Processing and smelting of copper containing sulphide concentrates result in the accumulation of impurities into various process streams. All primary copper smelters and refineries around the world produce significant amounts of slag, dust, sludge, residues and others, which contain copper and precious metals. The recovery of these valuable metals is essential to the overall economics of the smelting process. Physical, chemical and mineralogical characterization of particular slag and Cottrell dusts from primary smelters and Dore furnace (TBRC) slag and Pressure Leached Anode slimes from a copper refinery have been carried out to understand the basic behind the recovery processes. Various process options have been evaluated and adapted for the treatment of slag from different smelting furnaces and Cottrell dusts as well as the intermediate products from copper refineries. Besides the hydro- or pyre-metallurgical treatments, the above mentioned physical separation options such as magnetic, gravity separation, flotation and precipitation flotation processes have been successfully identified and adapted as the possible process options to produce a Cu-rich or precious metal-rich concentrates for in-house recycling and other valued by-product for further treatment. The results of laboratory, pilot plant and production operations are presented, and incorporation of several alternative flowsheet is discussed in this paper.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.828-834
• /
• 2012

The ecotoxicity detection device for preliminary test (Test jig) was manufactured to develop the biological early warning system using Vibrio fischeri. In this study, the ecotoxicity detection charateristics of the Test jig was investigated for 6 heavy metals (Cr, Zn, Pb, Cd, Cu and Hg). It was observed that relative luminescence unit (RLU) of Vibrio fischeri constantly decreased by the concentrations of the tested heavy metals. In contrast with other heavy metals, RLUs of Pb and Hg constantly decreased even at low concentrations. RLU of Hg drastically decreased when its concentration increased from 0.13 mg/L to 0.25 mg/L. $EC_{50}$ values of Cr, Zn, Pb and Cd gradually decreased with exposure time, whereas there was no significant change in $EC_{50}$ values of Cu and Hg with time. On the other hand, $EC_{50}$ values between the Test jig and Reference device were compared to evaluate the ecotoxicity detection performance of the Test jig. No big difference was found in $EC_{50}$ vlaues between the two devices, indicating that the Test jig could be applied as the ecotoxicity detection device for heavy metals.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.216-222
• /
• 2011

BACKGROUND: This study was performed to evaluate the effects of environmental factors and heavy metals on the growth and phosphorus removal capacity of Alcaligenes sp., which was well known as one of PAOs(Phosphorus Accumulating Microorganisms). METHODS AND RESULTS: The environmental factors used in this study were temperature, pH and carbon sources, and the heavy metals included Cu, Cd, Zn, As, and Ni. The growth and P removal efficiency of Alcaligenes sp. was maximal as temperature, pH, and carbon source were $25^{\circ}C$, 7, and glucose+acetate, respectively. Also, the $IC_{50}$(median inhibitory Concentration) values of Alcaligenes sp. for the Cu, Cd, Zn, As, and Ni were 5.03, 0.08, 0.73, 282.20 and 4.74 mg/L, respectively. CONCLUSION(S): Based on the results obtained from this study, it appears that the growth and P removal efficiency of Alcaligenes sp. were affected by the environment factors and at the best optimum condition for its growth and P removal efficiency, as the concentrations of heavy metals were gradually increased, its growth was correspondingly decreased.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.74-81
• /
• 2011

The dry method and wet method are currently used for the recovery of platinum group metals (Pt, Rh, Pd) contained in spent automobile catalysts. The study herein aims to identify the melting condition and optimum collector metal in accordance with a comparison of each concentration change in melting waste catalysts, using Fe and Cu in a basic experiment to recover waste catalysts through application of the dry melting method. As a summarized result of the experiment herein, it was determined to be more advantageous to use Fe as a parent material rather than Cu from the aspect of recollection rate, and the concentration change rate of platinum group metals within slag was greatly enhanced at $1,600^{\circ}C$ melting condition rather than at $1,500^{\circ}C$ in terms of melting processing temperature. The mean concentration of platinum group metals - Rh, Pd and Pt - within slag after a melting process at $1,600^{\circ}C$ were 6.21 ppm, 5.98 ppm and 6.97 ppm. The Rh and Pd were 50.58% and 55.31% respectively greater than the concentration change rate of platinum group metals in slag at a melting temperature of $1,500^{\circ}C$. However, since the initial concentration of Pt within the waste catalysts was 12.9 ppm, is relatively low, it was difficult to compare concentration change rates after the melting process.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.1
• /
• pp.73-82
• /
• 2021

Objectives: This study aimed to investigate the public cognition and information acquisition route for heavy metals and organic solvents in the general population in order to provide information for the development of public relations materials. Methods: The study was carried out by questionnaire from January to March 2011 by an interview with trained surveyors. There were 700 participants, divided by gender and age. A questionnaire was issued consisting of subjective and objective cognition evaluation items and questions about information acquisition route and preferred information acquisition route for six heavy metals and five organic solvents. Data were expressed as a percentage using the SPSS 23.0 software package. Result: For heavy metals, subjective and objective cognition degrees were higher in the order of lead, mercury, cadmium, and arsenic. They were higher among males than females, and in adults compared to school-age subjects. For organic solvents, both cognition degrees were high in the order of acetone, benzene, and formaldehyde. However, cognition degree by gender and age showed a complex pattern. As a response to information acquisition route, broadcast media had the highest in all ages and genders, followed by word of mouth from neighbors in elementary school children, school education or expert lectures in middle and high school students up to people in their 30s, and print media among those in their 40s to over 60s. There was no difference in the order by gender. As a response to preference for information acquisition route, broadcast media also proved the highest in all ages and genders, followed by school education or professional lectures among those in elementary school and over their 60s, and the internet in other age groups. Females preferred school education or expert lectures and word of mouth from neighbors, while males preferred the internet. In the case of the internet, the ranking was higher for preferred information acquisition route compared with the ranking for information acquisition route. Conclusions: This data on cognition degree, information acquisition route, and preferred information acquisition route according to gender and age can provide basic data for the development of educational and promotional materials for heavy metals and organic solvents exposure management.

• Journal of Environmental Science International
• /
• v.26 no.6
• /
• pp.797-802
• /
• 2017

This study aimed to remove organic matter and heavy metals that could affect the recycling of soils contaminated by heavy metals, by means of electrolysis, carried out simultaneously with the leaching of the soil. To ensure better experimental equipment, a soil electrolysis apparatus, equipped with spiral paddles, was used to agitate the heavy-metal-contaminated soil effectively. The heavy-metal-contaminated soil was electrolyzed by varying the voltage to 5 V(Condition 1), 15 V(Condition 2), and 20 V(Condition 3), under the optimal operating conditions of the electrolysis apparatus, as determined through previous studies. The results showed that the pH of the electrolyte solution and the heavy-metal-contaminated soil, after electrolysis, tended to decrease with an increase in voltage. The highest removal efficiencies of TOC and $COD_{Cr}$ were 18.8% and 29.1%, 38.8% and 4.2%, and 33.3% and 50.0%, under conditions 1, 2 and 3, respectively. Heavy metals such as Cd and As were not detected in this experiment. The removal efficiencies of Cu, Pb and Cr were 4.7%, 8.3% and 2.1%, respectively, under Condition 1, while they were 42.9%, 15.2% and 22.1%, respectively, under Condition 2, and 4.7%, 23.0%, and 24.9%, respectively, under Condition 3. These results suggest that varying the voltage with the soil electrolysis apparatus for removing contaminants for the recycling of heavy-metal-contaminated soil allows the selective removal of contaminants. Therefore, the results of this study can be valuable as basic data for future studies on soil remediation.

• Resources Recycling
• /
• v.17 no.2
• /
• pp.46-54
• /
• 2008

It is well known that PCB (Printed Circuit Board) is a complex mixture of various metals. In this study, pyro-metallurgical process was investigated to extract valuable metallic components from the PCB scrap. PCB scrap was shredded and oxidized to remove plastic materials, and then, quantitative analysis were made. 15 mass %$Al_2O_3-45$ mass %CaO-40 mass %$SiO_2$ and 32 mass %$SiO_2-20$ mass %$Al_2O_3-38$ mass %CaO-10 mass %MgO, were chosen as basic slag compositions which are determined based on the quantitative analysis of PCB scrap. During experiments a super kanthal rotating furnace was used to melt and separate metallic components. Moreover the revolution effect on was the recovery of valuable metals from PCB scrap also investigated.

• YAKHAK HOEJI
• /
• v.53 no.5
• /
• pp.274-280
• /
• 2009

To survey the status of quality control of major ingredients of 'Ssanghwatang (Oriental medicine used for fatigue)', we analyzed 1,024 samples (9 kinds) of medical herbs to determine amounts of ashes, acid-insoluble ashes, loss on drying that are major elements to ensure basic quality of herbal drugstuffs. After ash analysis, Paeoniae Radix (from China) failed to meet the herbal standard criterion. After yielding Z-score(indicating the probability of exceeding its criterion) Zizyphi Fructus, Zingiberis Rhizoma, Paeoniae Radix, Rehmanniae Radix Preparata became objects of intense quality control (=IQC). Analysis on loss on drying shows Cinnamomi Cortex was unsuitable and was put under the IQC. In case of respective heavy metals, Angelicae Gigantis Radix, Cnidii Rhizoma, Cinnamomi Cortex exceeded the maximum permissible range for Cd. The 3 kinds of sub-standards were put to the IQC. Statistic figures showed a significant correlation (t-test, p<0.01) between country-of-origin and sub-quality rates. Compared to domestic one, imported medicinal herbs were less suitable in regard of acid-insoluble ash, loss on drying and Pb/Hg content. Meanwhile, amounts of Acid-insoluble ash showed positive relation with amounts of Pb (r=0.202) and As (r=0.243) among heavy metals leading to an inference that herbs of which root/rhizome is used for medical purposes attribute its high heavy metal content to the fine earth/sand being stuck to its root stalk.

• Composites Research
• /
• v.31 no.4
• /
• pp.128-132
• /
• 2018

Multi-material design with metals and composites can keep structural functions as well as reduce the weight of automotive parts. However, recycling of automotive parts should be considered due to the increasing emphasis on the environments and pollutions. We derived the key issues for increasing the recycling rate of automotive parts by carrying out a survey targeting representatives and workers related with automotive recycling. The core of the key issues was the separation technology of adhesively bonded metal-composite hybrid structures, so we conducted the basic research and suggested the separation technology which can easily be adopted into the recycling industries.

• Journal of Environmental Science International
• /
• v.21 no.3
• /
• pp.377-382
• /
• 2012

Recent research has demonstrated that treating poultry litter with alum (aluminum sulfate) and aluminum chloride can remove environmental threats (ammonia, soluble phosphorus and odor) posed by litter. However, scientific information available on heavy metal in poultry litter with liquid aluminum chloride is still lacked. The purpose of this study was to investigate the effects of applying liquid aluminum chloride to rice hulls on heavy metals and to provide basic information to producers. Six hundred 0-d-old broiler were assigned to 4 treatments (control, 100 g, 200 g and 300 g of liquid $AlCl_3$/kg of rice hulls, respectively) with 3 replicates of 50 birds. The experimental period lasted for 6 weeks. Liquid $AlCl_3$ was sprayed on the rice hulls surface using a small hand pump. Total Al contents increased (P<0.05) with the increasing levels of liquid $AlCl_3$ levels over time in comparison with control groups. Total Cu and Pb were lowered in all liquid $AlCl_3$ treatments compared with the controls during 6 weeks. Significant differences in all treatments were found for total Cu contents at 2, 3 and 5 weeks and total Pb at 0, 1, 2 and 3 weeks. Total Zn contents decreased with time when compared with controls. However, no significant differences in total Zn contents were observed among all treatments. In light of environmental managements, spraying liquid $AlCl_3$ to rice hulls indicated the significant advantages in reducing heavy metals as well as improving poultry industrial competitiveness.