• Journal of environmental and Sanitary engineering
• /
• v.19 no.2
• /
• pp.30-36
• /
• 2004

Dry decontamination technique is required for maintaining nuclear material handling equipment contaminated with highly radioactive material in a hot cell. In order to determine the optimum blasting conditions of dry ice pellet blasting device, the basic experiments have been conducted on the simulated test specimens of four types of metals. The removal efficiency of test piece was evaluated by the XRF analysis and the change of the surface condition before and after blasting. The removal efficiency of cesium on loose contamination was 100% under blasting pressure; 3 kg/$cm^2$, blasting distance; 10 cm, blasting time: 10 sec. In case of fixed contamination, the removal efficiency of cesium was almost 96% under blasting pressure; 4kg/$cm^2$, blasting distance; 10 cm, blasting time; 30 sec.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.4
• /
• pp.59-62
• /
• 2013

The conductive link is used as a cooling medium between a cryocooler and magnet in a cryogen-free superconducting magnet system. The low temperature superconducting (LTS) magnet has one solenoidal configuration with a metal former which has a 52 mm room temperature bore. The superconducting coil is installed in the cryostat maintaining high vacuum and cooled by a two-stage cryocooler. In order to maintain the operating temperature of magnet at the designed level, the cold head temperature of the cryocooler must be lower so that heat can be removed from the superconducting coil. Also, temperature difference is occurred between the magnet and cryocooler and its magnitude is dependent upon the contact resistance at the interfacial surface between metals in the conductive link. In the paper, the performance of the LTS magnet is investigated with respect to the conductive link between the magnet former and the cold head of the cryocooler. The effects of the contact pressure and interfacial materials on the temperature distribution along the conductive link are also presented.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.5
• /
• pp.84-93
• /
• 2000

To provide the basic information for the water improvement and control of water resource in Boryung fresh water reservoir watershed, the characteristics of stream sediments and water quality of the watershed were investigated through 16 times totally, form November in 1998 to March in 2000. The COD values of stream water quality of the Boryung fresh-water reservoir watershed ranged from 0.75 to 6.38. Total -N concentration affected by the livestock wastes and agricultural activity ranged from 0.45 to 21.80mg/L and which was almost over the quality standard of agricultural water(1.0mg/L). Total-P concentration ranged from 0~0.176 mg/L and average value 0.031 mg/L . The contents of heavy metals from 138.4 to 3,457.3mg/kg and total-P were from 210.0 to 468.3 mg/kg. These were very high according to the influence by the livestock waste and sewage water partly.

• Transactions of Materials Processing
• /
• v.19 no.5
• /
• pp.290-295
• /
• 2010

Shaving technology is one of the significant metal forming technologies which can make the smooth and fine sheared surface of products after shearing process. The sheared surface on the side wall of the cutting edge is very important because it functions as a basic surface for measuring the dimensions of product. Effective sheared surface after shaving can be influenced by several working variables such as shaving allowance, shaving clearance, type of material and profile of cutting edge. The influence of these variables on shaving characteristics was investigated in this study. A cut-off die to make the simplified gear-shaped products was manufactured. Three kinds of sheet metals (AL5052, SPCC and SAPH440) of 3mm thickness were firstly sheared and then shaved for four shaving allowances and three sharing clearances. It was shown through experiments that the optimum working condition to give the maximum effective sheared surface in shaving was found ; Shaving allowance is 0.2mm and Shaving clearance is 0.01mm.

• Korean Journal of Plant Resources
• /
• v.4 no.2
• /
• pp.39-45
• /
• 1991

Proximate compositions of the roots of cultured and wild Codonopsis lanceolata were examined as tile basic reasearch for the study of their source of processed foods.No significant difference in the contents was found between the wild root and thecultivated at 3$0^{\circ}C$ in biotronroom. In view of the results to have measured mineralswhich is included in 14 sorts of Codonopsis lanceolata and surveyed their distribution.12 kinds of minerals including T1, Co, Ge, Sm, Mo, Sc, Be, Cd, As, Ga, Bi, ph are ne-vel or little included in almost source. Other twenty-one sorts of minerals (Ni, Se,Ba, Sb, Si, Ti, B, Li, Ifs, Ca, Sr, Mn, Fe, Cu, Zn, p, Al, Na, V, Cr, K) are more or less in-cluded in all source and Ca, Mg, p, K, and Fe are metals that are included in large qu-entities in comparison with others. No minerals difference in the contents was foundbetween the cultivated temperature. The content of elements of inorganic metal differsaccording to the part of C. lanceolata.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1323-1324
• /
• 2006

Refractory materials, such as W and Mo, are very useful elements for use in high-temperature applications. But it is not easy to fabricat pure W and Mo with very high density and retaining very fine grain size because of their high melting point. In this paper, a newly developed method named as resistance sintering under ultra high pressure was use to fabricate pure fine-grained W and Mo. The microstructure was analysis by SEM. The sintering mechanism is primary analyzed. Basic physical property of these sintered pure W and Mo, such as hardness, bend strength, are tested.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.6
• /
• pp.80-91
• /
• 2008

Electrostatic forces have an advantage of directly levitating not only non-ferromagnetic metals but also semiconductors, such as silicon wafers, and dielectric materials like glass. This paper describes the characteristics of electrostatic forces and electrostatic suspension system, followed by the basic principle of 1-DOF(degree of freedom) electrostatic suspension system, and the structures of electrodes-for-suspension and voltage supplying methods to the electrodes in 1-DOF model. This paper also discuss about the minimum number of electrodes needed to control n-DOF motion of the suspended object and represents some desirable electrode patterns to stabilize the 6-DOF motion of the object. In the near future, electrostatic suspension system is expected to be applied to industrial manufacturing processes, for example, to the manufacture of semiconductor devices and/or flat panel display devices.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.149-156
• /
• 2011

In case of domestic pyrolysis dry distillation gassification technology, it stays at the stage of its early introduction and development. Moreover, the companies possessed of this technology are limited to Japan and some countries in Europe, and domestic operative performance of this system is nominal, so there exist a lot of difficulties in securing its basic data. In addition, considering its operation and management, there happens a corrosion of metals by the production of corrosive gases in time of combustion of waste, and there arise a problem of occurrence of low temperature corrosion on exterior casing or gas ducts of a combustion chamber due to the high temperature corrosion around the burner of an incinerator, lowering the durability of an incinerator. Therefore, this study looked at the problems arising in time of incineration by understanding the characteristics of the pyrolysis dry distillation gassification incinerating facility, and did research on the improvement plan for durability of an incinerator for more economic, efficient waste incineration.

• Journal of Integrative Natural Science
• /
• v.13 no.4
• /
• pp.158-169
• /
• 2020

Modern people live in the age of plastics. It has been widely used due to its easy molding processing, mass production, and excellent durability. However, over-produced plastics for convenience cause plastic disasters and adversely affect the ecosystem. Since the COVID-19 outbreak, the use of single-use plastic waste due to the use of delivery services has increased. The COVID-19 pandemic has caused a plastic pandemic. Currently, domestic recycling policies depend only on recycling collection companies and market prices of recyclable resources. This paper confirms whether the outbreak of COVID-19 has affected the price of plastic waste. It also shows that the price of plastic waste is more unstable than metals with a high recycling rate. This urges businesses to share the cost of recycling on plastic waste, no longer being dependent on market prices for recyclable resources.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.892-898
• /
• 2005

A long, bis(monodentate), linking Schiff-base ligand L (py-CH=N-$C_6H_4$-N=CH-py) was prepared from 1,4-phenylenediamine and 3-pyridinecarboxaldehyde by the Schiff-base condensation. Ligand L has two terminal pyridyl groups capable of coordinating to metals through their nitrogen atoms. In contrast, the same reaction between 1,2-phenylenediamine and 3-pyridinecarboxaldehyde produced a mixture of imidazol isomers (2-pyridin-3-yl-1H-benzoimidazole), which are connected to one another by the N-H…N hydrogen bonding to form a tetramer. From Zn($NO_3)_2{\cdot}6H_2O$ and ligand L under various conditions, one discrete molecule, trans- [Zn($H_2O)_4L_2]{\cdot}(NO_3)_2{\cdot}(MeOH)_2$, and two 1-D zinc polymers, [Zn$(NO_3)(H_2O)_2(L)]{\cdot}(NO_3){\cdot}(H_2O)_2$ and [Zn(L) (OBC)($H_2O$)], were prepared. In ligand L, the N$\ldots$N separation between the terminal pyridyl groups is 13.994 $\AA$, with their nitrogen atoms at the meta positions (3,3’) in a trans manner. The corresponding N$\ldots$N separations in its compounds range from 13.853 to 14.754 $\AA$.