Browse > Article
http://dx.doi.org/10.5228/KSPP.2010.19.5.290

Influence of Working Variables in Simplified Gear Shaving Process  

Lee, K.S. (서울산업대학교 산업대학원 정밀기계공학과)
Jung, J.Y. (서울산업대학교 제품설계금형공학과)
Kim, J.H. (서울산업대학교 제품설계금형공학과)
Publication Information
Transactions of Materials Processing / v.19, no.5, 2010 , pp. 290-295 More about this Journal
Abstract
Shaving technology is one of the significant metal forming technologies which can make the smooth and fine sheared surface of products after shearing process. The sheared surface on the side wall of the cutting edge is very important because it functions as a basic surface for measuring the dimensions of product. Effective sheared surface after shaving can be influenced by several working variables such as shaving allowance, shaving clearance, type of material and profile of cutting edge. The influence of these variables on shaving characteristics was investigated in this study. A cut-off die to make the simplified gear-shaped products was manufactured. Three kinds of sheet metals (AL5052, SPCC and SAPH440) of 3mm thickness were firstly sheared and then shaved for four shaving allowances and three sharing clearances. It was shown through experiments that the optimum working condition to give the maximum effective sheared surface in shaving was found ; Shaving allowance is 0.2mm and Shaving clearance is 0.01mm.
Keywords
Cut-off Die; Shaving; Effective Sheared Surface; Clearance; Shaving Allowance;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 W. J. Chung, K. B. Hwang, J. H. Kim, H. Y. Ryu, 2008, A Study on the Improvement of the Accuracy of a Shaving Process Using a Progressive Die, International Journal of Modern Physics B, Vol. 22, Part 1 of 2, No. 31-32, pp. 5673-5679.   DOI
2 S. K. Oh, D. I. Jo, B. D. Kang, J. H. Kim, 2008, Influence of shaving Allowance and Clearance in Pre-shearing process for Improving shaving Accuracy, Journal of The Korea Society of Die & Mold Engineering, Vol. 3 No. 3, pp. 40-44.
3 J. H. Kim, J. G. Ryu, C. S. Choi, W. J. Chung, 1996, Development of Fine Blanking Die with Fluid Chamber and its Application to Production of Circular Blanks in a Hydraulic Press, Journal of the Korean Society for Precision Engineering, Vol. 13, No. 5, pp. 157-163.
4 S. K. Oh, D. I. Jo, B. D. Kang, J. H. Kim, 2008, Study on the shear Factors in fine Blanking Process, Journal of The Korea Society of Die & Mold Engineering, Vol. 2 No. 2, pp. 38-42.
5 K. T. Han, 1999, A Study on the Forming of Parts for Automobile using Fine Blanking Process, Journal of the Korean Society of Machine Tool Engineers Vol. 8, No. 2, pp. 56-61.   과학기술학회마을
6 J. K. Lee, W. Park, S. H. Kang, C. H. Kim, C. H. Kim, 2002, A Study on the Steps of Shear Deformations Behavior of Fine-Blanking Process, Journal of the Korean Society of Machine Tool Engineers Vol. 11, No. 4, pp. 26-33.   과학기술학회마을
7 T. S. Kwak, Y. J. Kim, W. B. Bae, 2002, Finite element analysis on the effect of die clearance on shear planes in fine blanking, Journal of Materials Processing Technology, Vol. 130-131, pp. 462-468   DOI
8 S. Mekaru, 1982, Fine Cutting of Hard Material with Trapezoidal Single-side cutting Edged Tool, JSTP, Vol.23, No.254, 225-231.
9 K. Kondo, T. Lwama, K. Ohishi, 1982, Formability of the sheared Surface by Opposed Dies Shearing Process and Its Utilization, JSTP, Vol.23, No.262, pp. 1058-1065.
10 K. Hirota, K. Kondo, K. Maeda, 1996, Development of a Simple Precision Shearing Process for Thick Plates, JSTP, Vol.35, No.386, pp. 67-72.