• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1339-1342
• /
• 2002

It is difficult to design system software to meet a better separation of concerns, which can provide a number of benefits such as adaptability, extensibility, and modularity in the design and implementation. During design, some aspectual properties, such as synchronization, scheduling, performance and fault tolerance, crosscut the basic functionalities of the system software. By separating functional components from the different aspectual components of the system software in the design, we can provide a better generic design model of system software. Aspect-Oriented Programming is a methodology that aims at separating components and aspects from the early stages of the software life cycle, and using techniques to combining them together at the implementation phase. In this paper we discuss an aspect-oriented framework that can simplify system software design and implementation by expressing it at a higher level of abstraction. Our work concentrates on how to achieve a higher separation of aspectual components, functional components, and layers from each other. Our goal is to achieve a better design model for implementing system software in terms of modularity, reusability and adaptability.

• 한국안전학회지
• /
• 제29권2호
• /
• pp.53-61
• /
• 2014

This study evaluated wind loads considering a local basic wind velocity and construction periods to define the level of applied wind loads for system supports. Structural responses of system supports were examined and compared to those of system supports with the level of wind loads following various standards and specifications for permanent and temporary structures. And, the maximum combined stress ratios were estimated to evaluate the structural safety of a considered system support. From results, it was found that the wind load level should be applied in accordance with construction periods when estimating the safety of system supports. Looking into the response by change of the basic wind velocity according to local regions, it is no need to consider wind loads in regions with the basic wind velocity of 30 m/s. However, it was analyzed that wind loads should be considered in the regions with the basic wind velocity of 40 m/s or above. In addition, wind loads should be considered in designing system supports located at the region with the basic wind velocity of 35 m/s starting from construction period of 1.5 years. The standard specification for temporary work was analyzed as an incorrect standard in evaluating wind loads, since it underestimated the response of system supports in accordance with the local basic wind velocity and construction periods.

• 한국의류산업학회지
• /
• 제2권3호
• /
• pp.239-245
• /
• 2000

The purpose of this study was for analysis of ease about basic bodice pattern, as the first step of the research process for the drawing method of basic bodice for women in their twenties. The five selected basic bodice were made and they were worn by FRP body The garment space of each bodice was measured by analysis of the garment space of each section in figure of polymerization of cross section by a 3-D measuring instrument. The research suggests that this compared analysis is an objective reference. This analysis not only of the area of cross section of garment space and ease but also of the girth of the body shape and wearing shape, using the PAD system and 3-D measuring instrument, can be helpful in making garment patterns.

• 한국복식학회:학술대회논문집
• /
• 한국복식학회 2003년도 International Costume Conference
• /
• pp.32-32
• /
• 2003

This research has for its object to look carefully into the peculiarity of the color of the costume in the Korean culture by revealing the characteristic and the idea of the color being discovered in the Korean basic culture, which has the majority of the Korean people. The scope of the basic culture was divided into folk belief, folk game and folk play. Within these limits, the colors of the dress, accessories, instruments were extracted by comparing with the naked eye in NCS Color System. For the analysis of hue and tone the secondary dimensional analysis using NCS color system and the three-dimensional analysis using the software, COLOR 3D Version 2.0, were done.

• 동력기계공학회지
• /
• 제20권2호
• /
• pp.79-84
• /
• 2016

The thermodynamic performance of ocean thermal energy conversion with 1 kg/s geothermal water flow rate as a heat source was evaluated to obtain the basic data for the optimal design of cycle with respect to the classification of the working fluid. The basic thermodynamic model for cycle is rankine cycle and the geothermal water and deep seawater were adapted for the heat source of evaporator and condenser, respectively. R245fa, R134a are better to use as a working fluid than others in view of the use of geothermal water. It is important to select the proper working fluid to operate the ocean thermal energy conversion. So, this paper can be used as the basic data for the design of ocean thermal energy conversion with geothermal water and deep seawater.

• 대한건축학회논문집:구조계
• /
• 제35권7호
• /
• pp.171-178
• /
• 2019

Auto Climbing Formwork System (ACS) for construction of high-rise building is a construction method for automatically lifting the formwork system supported by the anchor on the pre-constructed concrete wall. It has excellent construction speed and quality, but it has the possibility of structural failure depending on the quality of concrete and also has low economical efficiency due to the use of foreign technology. In order to overcome these problems, this study conducted an optimum design for the development of a new concept of Corner Supported Auto Climbing System (CS-ACS) in conjunction with the development of corner steel-reinforced concrete core wall system. For the design the formwork system, the basic module and structural member compositions were planned, and the structural analysis program was used to analyze the optimum member's cross section and spacing. As a result, the horizontal displacement and the stress of the horizontal members were influenced by the spacing more than the cross-section of the member. On the other hand, vertical members did not affect the displacement and stress of the formwork system. The form tie was very effective in controlling the displacement when adjusting the spacing of the horizontal members, but when the spacing of the form tie is more than 1,500mm, it is analyzed that form tie is yielding in basic module. When the span of the formwork system is more than 30m, it is analyzed that the basic module needs to be changed because of the increase of overall displacement.

• 패션비즈니스
• /
• 제23권1호
• /
• pp.49-63
• /
• 2019

The purpose of this study is to examine the characteristics of modular design observed in Korean traditional clothing. Modular design, which is one of the noticeable characteristics of modern fashion design emerged in the 20th century. This study analyzed the Korean traditional culture to investigate the characteristics that show similarities to the modular system in design. A traditional Korean house is composed of small structures called 'chae'. A traditional Korean building is composed of a basic unit space called 'kan', and the rooms are divided and recombined. Korean traditional interior design shows furniture, bedding and art works that could be used, folded then stored. Korean cuisine is served in combination with small dishes. Korean letters are combined in square shaped form to make writing and printing easy. Korean traditional clothing has a way of washing where clothing are disassembled, washed and then re-stitched. The pattern pieces are made to be rectangular shaped so that the fabric pieces can be kept in shape during washing. The rectangular shaped pattern pieces can be replaced and reused after washing. Tops and bottoms could be interchanged for color-coordination, because the shapes of the clothing were standardized. These features exhibit modular system in Korean traditional clothing design. Modular system design has common characteristics which have basic modules, pursue practical purpose, have interchangeability adapted to circumstances, and could be disassembled and re-combined. Korean traditional clothing illustrates different ways of practicing modular system, but has some common features to contemporary modular fashion design.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 1995년도 학술발표대회논문집 하
• /
• pp.85-93
• /
• 1995

Recently, the development of Artificial Intelligence(AI) and Expert System has caused some interest in the possibility of developing an intelligent CAD system. However, these development and possibility are in an extremenly early stage for Architectural design. In this study, the design process of Residence being recognized as a Constraints-satisfied model, a part of these constraints used in the Architectural design of Residence are being systematized and sorted by the design process. Those regulations and planning items to be considered in the basic planning stage are being systematized as a knowledge base system. The possibility of this knowledge-based system as an effective design tool is studied and an integrated form of Architectural design system is proposed.

• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.337-346
• /
• 2013

플랜트 설계는 매우 다양한 공학 분야가 참여하는 고도로 복잡한 시스템이다. 이 방대한 시스템에 관여된 각 서브시스템은 각기 다른 서브시스템과 수시로 정보를 주고 받으며 작업을 반복하게 되는 복잡한 관계를 형성한다. 이런 복잡한 프로세스에서 체계적인 설계관리는 성공적인 플랜트 설계를 위한 필수적인 요건이다. 이에 본 연구에서는 Design Structure Matrix를 이용하여 플랜트의 최적 설계 협업 체계를 도출하였다. 이를 위해 전문가 설문 및 워크샵을 수행하여 플랜트 설계의 주요 업무, 설계 서브시스템, 설계요소, 관련설계요소, 그리고 그들간의 관계를 파악하였다. 효율적인 분석을 위해 Visual Basic Application과 Matlab을 이용하여 자동화된 분석 프로그램을 개발하였다. 제안된 방법과 프로그램을 소각로 설계 시스템에 적용한 결과 유효한 주요 반복작업 그룹들을 도출할 수 있었다. 도출된 결과물은 설계 협업 전략 수립에 유용하게 활용될 수 있을 것으로 사료된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.1-4
• /
• 1995

We propose a new design method for a generalized predictive control (GPC) system based on the parametrization of two-degree-of freedom control systems. The objective is to design the GPC system which guarantees the stability of the control system for a perturbed plant. The design procedure of our proposed method consists of three steps. First, we design a basic controller for a nominal plant using the LQG method and parametrize a whole control system. Next, we identify the deviation between the perturbed plant and the nominal one using a closed-loop identification method and design a free parameter of parametrization to stabilize the closed-loop system. Finally, we design a feedforward controller so as to incorporate GPC technique into our controller structure. A numerical example is presented to show the effectiveness of our proposed method.