• Journal of the Korean Data and Information Science Society
• /
• 제17권4호
• /
• pp.1289-1297
• /
• 2006

Before other statistical data analysis the preprocessing steps should be performed adequately to have meaningful results. These steps include processes such as baseline correction, normalization, denoising, and multiple alignment. In this paper an algorithm for baseline correction is proposed with using the piecewise cubic Hermite interpolation with block-selected points and local minima after denoising for SELDI or MALDI mass spectrometry data.

• 한국압력기기공학회 논문집
• /
• 제14권2호
• /
• pp.69-76
• /
• 2018

The paper presents preliminary investigation results for the effect of the baseline correction in the acceleration excitation method on finite element seismic analysis results (such as accumulated equivalent plastic strain, equivalent plastic strain considering cyclic plasticity, von Mises effective stress, etc) of nuclear safety Class I components. For investigation, finite element elastic-plastic time-history seismic analysis is performed for a surge line including a pressurizer lower head, a pressurizer surge nozzle, a surge piping, and a hot leg surge nozzle using the Chaboche hardening model. Analysis is performed for various seismic loading methods such as acceleration excitation methods with and without the baseline correction, and a displacement excitation method. Comparing finite element analysis results, the effect of the baseline correction is investigated. As a result of the investigation, it is identified that finite element analysis results using the three methods do not show significant difference.

• 전자공학회논문지
• /
• 제53권3호
• /
• pp.124-131
• /
• 2016

분광법을 이용한 많은 응용에서 스펙트럼 데이터의 기준선 보정은 분석 시스템의 성능을 좌우하는 매우 중요한 과정이다. 기준선은 많은 경우에 육안 검사로 매개변수를 선택하여 추정한다. 이 과정은 매우 주관적이고 특히 대량의 데이터인 경우 지루한 작업을 동반하므로 좋은 분석 결과를 보장하기 어렵다. 이러한 이유로 기준선 보정에서 최적의 매개변수를 자동으로 선택하기 위한 객관적인 방법이 필요하다. 이전의 연구에서 PLS(penalized least squares) 방법에 새로운 가중 방식을 도입하여 기준선을 추정하는 arPLS(asymmetrically reweighted PLS) 방법을 제안하였다. 본 연구에서는 arPLS 방법에서 최적의 매개변수를 자동으로 선택하는 방법을 제안한다. 이 방법은 가능한 매개변수의 범위에서 추정한 기준선의 적응도와 평활도를 계산한 다음 정규화한 적응도와 평활도의 합이 최소가 되는 매개변수를 선택한다. 경사 기준선, 곡선 기준선, 이중 곡선 기준선의 모의실험 데이터와 실제 라만 스펙트럼을 이용한 실험에서 제안한 방법이 기준선 보정을 위한 최적 매개변수의 선택에 효과적으로 적용될 수 있음을 확인하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권5호
• /
• pp.397-405
• /
• 2022

Computed radiography (CR) systems, which convert an analog signal recorded on a cassette into a digital image, combine the characteristics of analog and digital imaging systems. Compared to digital radiography (DR) systems, CR systems have presented difficulties in evaluating system performance because of their lower detective quantum efficiency, their lower signal-to-noise ratio (SNR), and lower modulation transfer function (MTF). During the step of energy-storing and reading out, a baseline offset occurs in the edge area and makes low-frequency overestimation. The low-frequency offset component in the line spread function (LSF) critically affects the MTF and other image-analysis or qualification processes. In this study, we developed the method of baseline correction using mathematical morphology to determine the LSF and MTF of CR systems accurately. We presented a baseline correction that used a morphological filter to effectively remove the low-frequency offset from the LSF. We also tried an MTF evaluation of the CR system to demonstrate the effectiveness of the baseline correction. The MTF with a 3-pixel structuring element (SE) fluctuated since it overestimated the low-frequency component. This overestimation led the algorithm to over-compensate in the low-frequency region so that high-frequency components appeared relatively strong. The MTFs with between 11- and 15-pixel SEs showed little variation. Compared to spatial or frequency filtering that eliminated baseline effects in the edge spread function, our algorithm performed better at precisely locating the edge position and the averaged LSF was narrower.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.500-506
• /
• 2019

본 연구에서는 arPLS(asymmetrically reweighted penalized least squares) 방법에서 분광신호의 길이와 차수를 이용한 최적의 평활화 매개변수를 위한 결정함수를 제안한다. 분광신호의 기준선 보정은 분석 시스템의 성능을 좌우하는 매우 중요한 과정으로 많은 경우에 육안 검사로 매개변수를 선택하여 추정한다. 이 과정은 매우 주관적이고 특히 대량의 데이터인 경우 지루한 작업을 동반하므로 좋은 분석 결과를 보장하기 어렵다. 이러한 이유로 기준선 보정에서 최적의 매개변수를 결정하기 위한 객관적인 방법이 필요하다. 제안한 결정함수는 기준선 보정에 사용 가능한 매개변수 범위의 중앙값이 신호의 길이가 길어질수록 증가하고, 신호의 차수가 작아질수록 감소하는 관계를 정리하여 모델링하였다. 모의실험 데이터는 신호의 길이 7가지에 대해 조합한 분석신호 4가지와 선형 기준선과 2차, 3차, 4차 곡선 기준선을 각각 더하여 모두 112개를 생성하였다. 모의실험 데이터와 실제 라만 분광신호를 이용한 실험에서 제안한 결정함수의 평활화 매개변수가 기준선 보정에 효과적으로 적용될 수 있음을 확인하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권4호
• /
• pp.201-207
• /
• 2001

This paper describes an automated detection algorithm of ST-T episodes using global curvature which can connect the isoelectric level in ECG and can eliminate not only the slope of ST segment, but also difference of the baseline and global curve. This above method of baseline correction is very faster than the classical baseline correction methods. The optimal values of parameters for baseline correction were found as the value having the highest detection rate of ST episode. The features as input of backpropagation Neural Network were extracted from the whole ST segment. The European ST-T database was used as training and test data. Finally, ST elevation, ST depression and normal ST were classified. The average ST episode sensitivity and predictivity were 85.42%, 80.29%, respectively. This result shows the high speed and reliability in ST episode detection. In conclusion, the proposed method showed the possibility in various applications for the Holter system.

• 전자공학회논문지CI
• /
• 제49권1호
• /
• pp.16-22
• /
• 2012

본 논문에서는 알츠하이머병이 유도된 형질전환 마우스로부터 획득한 혈소판 라만 스펙트럼의 분석을 위해 가우시안 모델을 이용한 커브 피팅으로 기준선을 추정하고 보정하는 방법을 제안하였다. 측정된 라만 스펙트럼은 의미 있는 정보와 불필요한 노이즈 성분인 기준선과 가산 노이즈를 포함하고 있다. 스펙트럼의 효율적인 분석을 위해 노이즈를 포함하고 있는 스펙트럼을 몇 개의 피크를 포함하는 영역으로 분할하고 각 로컬 영역의 스펙트럼을 가우시안 모델을 이용한 커브 피팅으로 모델링한다. 가산 노이즈는 원 스펙트럼을 이 델로 대체하는 과정에서 명백하게 제거된다. 피팅된 모델의 로컬 최저점을 linear, piecewise cubic Hermite, cubic spline 알고리즘으로 보간하고 기준선을 보정한다. 기준선을 보정한 피팅 모델은 PCA(principal component analysis) 방법을 이용하여 특징을 추출하고 SVM(support vector machine)과 MAP(maximum $a$ posteriori probability) 분류 방법으로 성능 비교 실험을 하였다. 실험 결과에 따르면 linear 보간법이 모든 주성분 수에 대한 분류율의 평균에서 우세하였고 특히 piecewise cubic Hermite 보간법은 주성분의 수가 5개인 경우에서 SVM 분류율이 약 97.3%로 가장 좋은 성능을 보였다. 또한 이전의 연구 결과와 비교를 통해 제안한 기준선 보정 방법이 혈소판 라만 스펙트럼의 분석에 효과적으로 적용될 수 있음을 확인하였다.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.29-34
• /
• 2007

The baseline selection is the first and important step to analyze magnetocardiography (MCG) parameters. There are no difficulties to select the baseline between P- and Q-wave peak (P-Q interval) of MCG wave recorded from healthy subjects because the P-Q intervals of the healthy subjects do not much vary. However, patients with ischemic heart disease often show an unstable P-Q interval which does not seem to be appropriate for the baseline. In this case, T-P interval is alternatively recommended for the baseline. However, there has been no study on the difference made by the baseline selection. In this study, we studied the effect of the different baseline selection. MCG data were analyzed from twenty healthy subjects and twenty one patients whose baselines were alternatively selected in the T-P interval for their inappropriate P-Q interval. Paired T-test was used to compare two set of data. Fifteen parameters derived from the R-wave peak, the T-wave peak, and the period, $T_{max/3}{\sim}T_{max}$ were compared for the different baseline selection. As a result, most parameters did not show significant differences (p>0.05) except few parameters. Therefore, there will be no significant differences if anyone of two intervals were selected for the MCG baseline. However, for the consistent analysis, P-Q interval is strongly recommended for the baseline correction.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.44-50
• /
• 2014

This paper describes reasonable methods by considering change of outdoor temperature into Customer Baseline Load(CBL) of Demand Resources in Smart Demand Resource Market, which controls peak power demand and maintains reliability of power system. The Smart Demand Resouce Market, which KPX(Korea Power Exchange) implement, is explained and then effects for CBL calculated by considering temperature correction factor are established. Finally, four methods for calculation of CBL are proposed and those results are compared and analyzed.

• Journal of Positioning, Navigation, and Timing
• /
• 제2권1호
• /
• pp.9-17
• /
• 2013

In this paper, a pseudorange correction regeneration algorithm was developed to improve the positioning accuracy of DGPS using multi-reference stations, and the optimal minimum number of reference sites was determined by trying out different numbers of reference. This research was conducted using from two to five sites, and positioning errors of less than 1 m were obtained when pseudorange corrections are collected from at least four reference stations and interpolated as the pseudorange correction at the rover. After determining the optimal minimum number of reference stations, the pseudorange correction regeneration algorithm developed was tested by comparison with the performance of other algorithms. Our approach was developed based on an exponential model. If pseudorange corrections are regenerated using an exponential model, the effect of a small difference in the baseline distance can be enlarged. Therefore, weights can be applied sensitively even when the baseline distance differs by a small amount. Also weights on the baseline distance were applied differently by assigning weights depending on the difference of the longest and shortest baselines. Through this method, the positioning accuracy improved by 19% compared to the result of previous studies.