• 전기학회논문지
• /
• 제63권1호
• /
• pp.85-91
• /
• 2014

As RFID is utilized more frequently and diversely in terms of its application areas, the application of mobile RFID technology, which integrates cellular networks and RFID, is highly anticipated. The growth and development of the RFID field has bolstered the development of mobile RFID chips to be embedded in mobile phones. Because mobile RFID chips are embedded in cell phones, limitations such as low power, small form factor, and costliness must be confronted. This study presents the design of a RFID digital baseband processor that is suitable for mobile readers. The RF analog component, which affects the baseband signals, is designed separately, in consideration of the limitations stated above. The function of the baseband processor was verified through simulations and prototyped using FPGA. The power consumption of the chip is 20mW under a 20MHz clock and the chip measures $3mm{\times}3mm$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.186-189
• /
• 2003

This paper discussed whole concept of bluetooth baseband and studied its detail algorithm. Important blocks, access code, security and clock management, are implemented and verified to hardware and firmware according to Specification ver.1.1. Then implementation results are compared and examined. Finally, this paper suggested the efficient system implementation method. By using test board, it could confirm that suggested implementation communicated smoothly.

• Journal of Communications and Networks
• /
• 제5권4호
• /
• pp.374-385
• /
• 2003

The growing interest towards ultra-wideband (UWB) communications stems from its unique features such as baseband operation, ample multipath diversity, and the potential of enhanced user capacity. But since UWB has to overlay existing narrowband systems, multiple access has to be achieved in the presence of narrowband interference (NBI). However, existing baseband spreading codes for UWB multiple access are not flexible in handling NBI. In this paper, we introduce two novel spreading codes that not only enable baseband UWB multiple access, but also facilitate flexible NBI cancellation. We construct our codes using a single carrier or multiple carriers (SC or MC), which can be implemented with standard discrete-cosine transform (DCT) circuits. With our SC/MC codes, NBI can be avoided by simply nulling undesired digital carriers. Being digital, these SC/MC codes give rise to multiband UWB systems, without invoking analog carriers. In addition, our SC/MC codes enable full multipath diversity, and maximum coding gains. Equally attractive is their capability to reduce the number of interfering users, with simple matched filter operations. Comprehensive simulations are also carried out to corroborate our analysis.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.260-264
• /
• 2008

In this paper, a dual mode baseband analog channel selection filter is described which is designed for the Bluetooth and WCDMA wireless communications. Using the presented current-mode integrator, a dual mode channel selection filter is designed. To verify the current-mode integrator circuit, Hspice simulation using 1.8V Hynix $0.18{\mu}m$ standard CMOS technology was performed and achieved $50.0{\sim}4.3dB$ gain, $2.29{\sim}10.3MHz$ unity gain frequency. The described third-order dual mode analog channel selection filter is composed of the current-mode integrator, and used SFG(Signal Flow Graph) method. The simulated results show 0.51, 2.40MHz cutoff frequency which is suitable for the Bluetooth and WCDMA baseband block each.

• ETRI Journal
• /
• 제34권2호
• /
• pp.147-158
• /
• 2012

In this paper, we present a demodulation structure suitable for a reader baseband receiver in a passive radio frequency identification (RFID) environment. In a passive RFID configuration, an undesirable DC-offset phenomenon may appear in the baseband of the reader receiver, which can severely degrade the performance of the extraction of valid information from the received tag signal. To eliminate this DC-offset phenomenon, the primary feature of the proposed demodulation structures for the received FM0 and Miller subcarrier signals is to reconstruct the signal corrupted by the DC-offset phenomenon by creating peak signals from the corrupted signal. It is shown that the proposed method can successfully detect valid data, even when the received baseband signal is distorted by the DC-offset phenomenon.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.255-258
• /
• 2003

To design the Bluetooth core efficiently, I analyzed the entire architecture and basic functions in the baseband and attempted to implement a Bluetooth one-chip solution on the basis of the Bluetooth SIG specification 1.1. We implemented important blocks into the hardware and firmware and found increased efficiency implementation when compared with the results of the implementation that using the criterion of size, Performance, stability, etc. And then to connect the baseband to the SE3208 core of the EISC type, we defined the baseband register and discovered a suitable method by comparing two results with the two connection ways.

• ETRI Journal
• /
• 제26권5호
• /
• pp.486-492
• /
• 2004

The emergence of wide channel bandwidth wireless standards requires the use of a highly linear, wideband integrated CMOS baseband chain with moderate power consumption. In this paper, we present the design of highly linear, wideband active RC filters and a digitally programmable variable gain amplifier. To achieve a high unity gain bandwidth product with moderate power consumption, the feed-forward compensation technique is applied for the design of wideband active RC filters. Measured results from a $0.5{\mu}m$ CMOS prototype baseband chain show a cutoff frequency of 10 MHz, a variable gain range of 33 dB, an in-band IIP3 of 13 dBV, and an input referred noise of 114 ${\mu}Vrms$ while dissipating 20 mW from a 3 V supply.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권1호
• /
• pp.59-65
• /
• 2023

A GNSS receiver must perform signal acquisition to estimate the code phase and Doppler frequency of the incoming satellite signals, which are essential information for baseband signal processing. Modernized GNSS signals have different modulation schemes and long PRN code lengths from legacy signals, which makes it difficult to acquire the signals and increases the computational complexity and time. This paper proposes a novel FFT/Inverse-FFT with baseband resampling to resolve the aforementioned challenges. The suggested algorithm uses a single block only for the FFT and thereby requires less hardware resources than conventional structures such as Double Block Zero Padding (DBZP). Experimental results based on a MATLAB simulation show this algorithm can successfully acquire GPS L1C/A, GPS L2C, Galileo E1OS, and GPS L5.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1983년도 추계학술발표회논문집
• /
• pp.32-34
• /
• 1983

In this paper, an analog optical filter link is evaluated for the transmission of baseband video signals over a single fiber. LED and PIN photo diode are used as the optical source and the detector. Frequency response of the system, DP, DG and SNR are measured.

• 대한전자공학회논문지TC
• /
• 제46권1호
• /
• pp.60-63
• /
• 2009

본 논문에서는 2.3-2.7GHz의 WiMAX용 TDD 중계기의 송수신 안테나 제어를 위해서 상향링크 구간과 하향링크 구간에 대한 구분 신호를 생성하는 모듈을 설계 및 구현하였다. RF 처리부와 Baseband 처리부로 나뉘어 설계하였으며, 본 회로의 기능은 WiMAX 신호와 시간 동기를 맞추고, 상향링크 구간과 하향링크 구간에 대한 구분 신호를 생성하는 것이므로, RF 처리부에는 수신경로만 구현되어 있다. 또한 RF 처리부의 대부분을 하나의 칩으로 제작하여 설계 면적을 최소화 하였으며, WiMAX 신호의 Preamble과 DL-MAP 정보를 검출하기 위해서 WiMAX Modem을 사용하여 Baseband 처리부를 설계하였다. 본 설계는 국내외의 2.3-2.7GHz WiMAX 신호에 대해 모두 처리가 가능하다.