• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.34-42
• /
• 2008

Generally, paper multilayering was performed before wet pressing process. However, sheets whose characteristics are different could be put together at the dry state by adhesives for the specialty paper products. In this paper, potential adhesives such as PVAc, oxidised starch, latex, and PVA were chosen and multilayering of several sheets was performed in laboratory scale. The effects of base paper properties and the composition of adhesives on the physical properties of multilayering paper were investigated. Physical properties such as bonding strength and stiffness were measured. For the practical reasons, mill trial was also executed. According to the result of laboratory tests and mill trial test, the physical properties of multilayered paper were greatly affected by the composition of adhesives and it was found that PVAc showed the best performance in all its aspects among four adhesives. Oxidised starch had an advantage of high stiffness and PVA gave high bonding strength to the multilayered paper. And it was also found that the properties of base paper showed the great influences not only on multilayering process, but also on the physical properties of the multilayered paper.

• Advances in materials Research
• /
• v.5 no.2
• /
• pp.93-105
• /
• 2016

KNN-based ceramics modified with small amounts of $Bi_4Zr_3O_{12}$ (BiZ) has been synthesized using high-throughput experimentation (HTE). The results from X-ray diffraction show that for samples with base composition $(K_{0.5}Na_{0.5})NbO_3$ (KNN), the phase present changes from orthorhombic to pseudo-cubic with more than 0.2 mol% BiZ addition; for samples with base composition $(K_{0.48}Na_{0.48}Li_{0.04})(Nb_{0.9}Ta_{0.1})O_3$ (KNNLT), the phase present changes from a mixture of orthorhombic and tetragonal symmetry to pseudo-cubic with more than 0.4 mol % while for samples with base composition $(K_{0.48}Na_{0.48}Li_{0.04})(Nb_{0.86}Ta_{0.1}Sb_{0.04})O_3$ (KNNLST), the phase present is tetragonal with <0.3 mol% BiZ addition and transforms to pseudo-cubic with more dopant addition. The microstructures of the samples show that addition of BiZ decreases the average grain size and increases the volume of pores at the grain boundaries. The values of dielectric constant for KNN and KNNLT compositions increase slightly with BiZ addition while that for KNNLST decreases gradually with BiZ addition. The dielectric loss values are between 0.02 and 0.04 for KNNLT and KNNLST compositions while they are ~ 0.05 for KNN samples. The resistivity values increases with BiZ addition and values in the range of $10^{10}{\Omega}cm$ and $10^{12}{\Omega}cm$ are obtained. The piezoelectric charge coefficient ($d{^*}_{33}$) is highest for KNNLST samples and decreases gradually from ~400 pm/V to ~100 pm/V with BiZ addition.

• Tribology and Lubricants
• /
• v.18 no.4
• /
• pp.255-259
• /
• 2002

The tribological properties of eight different liquid crystals were investigated in a concentrated point contact device and a ball-on-flat contact. For comparison, the same tests were also performed with commercial greases and the corresponding base oils. Under the fully flooded conditions studied, liquid crystals in a concentrated point contact showed lower friction than commercial greases and greater film thickness dependence on rolling speed than grease base oils or greases. Test results also showed that the film thickness and friction were little influenced by the composition of the examined liquid crystals.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.2 no.2
• /
• pp.9-16
• /
• 1983

There are two weak points in a high pressure vessel, one is a corner, the other is a crack on the base. In order to evaluate safety of a department of a corner and a crack like a starfish on the base in a high pressure vessel (working pressure: $130kg/cm^{2}$), which was made by Marison's Process, we analyzed stress by strain gauge, measured thickness and hardness by ultrasonic testing, and were able to test pressure by water pressure from nondestructive testing. Also destructive testings were applied to measure thickness and to observe microstructure and chemical composition of a corner on the base. From the results of the experiment, values of experiment were satisfied with a condition of application. But, it is considered that a crack on the base is to be investigated with more by Fracture Mechanics.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.3
• /
• pp.253-263
• /
• 2007

Three different weather-resistant coatings were fabricated with the various weight ratios of a mill-base silicone/acrylic resin to let-down silicone /acrylic resin at 2:8, 3:7, and 4:6 respectively. The prepared coatings were tested to investigate the effect of composition of weather-resistant coatings on the physical properties. The thermal stability, salt spray exposure, and weather-resistance were improved with the increased silicone content. It was concluded that the optimum retio of mill-base silicone/acrylic resin to let-down silicone/acrylic resin would be 2:8 and the coating with 30 wt% of silicone content would have high weather-resistance.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.315-320
• /
• 1997

Rule minimization technique adapted from rough set theory was applied to remove redundant knowledge which is not necessary to make a knowledge base. New algorithm to diagnose fault using Improved Fuzzy Cognitive Maps(I-FCMs), and Fuzzy Associative Memory(FAM) is proposed. I-FCM[22] is superior to gathering knowledge from many experts and descries dynamic behaviors of systems very well. I-FCM is not only a knowledge base, but also a inference engine. FAM has learning capability like neural network[12]. Rule minimization and composition of I-FCM and FAM make it possible to construct compact knowledge base and breaks the border between inference engine and knowledge base.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.4
• /
• pp.487-495
• /
• 1999

In order to form metallic electrodes on PZT (Pb (Zr, Ti)O$_3$) ceramics, plating conditions for optimal electroless Ni deposition were investigated. Pb in PZT is the major component to inhibit the electroless deposition, because it plays a active role of catalytic poison in plating solution. Adhesion of the electroless Ni deposits is measured by push-pull scale test and peel test. Results such as deposition ability, deposition rate, and thickness of deposits showed in terms of concentration of etchant, composition of catalyzing solution, and composition and pH of electroless bath solution.

• The Journal of Information Systems
• /
• v.5
• /
• pp.149-173
• /
• 1996

This paper focus on the development of object-oriented model bases for Structured Modeling. For the model base organization, object modeling techniques and model typing concept which is similar to data typing concept are used. Structured modeling formalizes the notion of a definitional system as a way of dscribing models. From the object-oriented concept, a structured model can be represented as follows. Each group of similar elements(genus) is represented by a composite class. Other type of genera can be represented in a similar manner. This hierarchical class composition gives rise to an acyclic class-composition graph which corresponds with the genus graph of structured model. Nodes in this graph are instantiated to represent the elemental graph for a specific model. Taking this class composition process one step further, we aggregate the classes into higher-level composite classes which would correspond to the structured modeling notion of a module. Finally, the model itself is then represented by a composite class having attributes each of whose domain is a composite class representing one of the modules. The resulting class-composition graph represent the modular tree of the structured.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.1
• /
• pp.141-154
• /
• 2012

This study was launched to verify the effective composition of plant species and its management program most suited for the dredged soiled area near Nakdong River Site 14. The improvement methods of planting base and the composition of plants such as silver grass, reed, and some colonies in aesthetic effect were studied. To search the management methods to decrease the confining pressure risen from the burried seeds which would consequently harm the previously seeded plants, experimental construction process was measured on the site. The purpose of this experiment was to figure out which part of the improvement on the plant base has the most significant effect for the revegetation of infertile, dredged soil, to verify the easily seeded, developing plants among seeded plants, and finally, to find the restoration model using plants near the dredged soil around riverside. 8 seeded plants and 23 invaded species were appeared which among the emerged plants, development of Aster yomena MAKINO, Lotus corniculatus var. japonica Regel, Trifolium repens L, and Dianthus longicalyx Miq were proved to be brought up well. Difference risen from the seed composition were not noticeable until 150day since the germination was proceeded mainly by Aster yomena MAKINO. The experimental plot with dredging sand+organic fertilizer method of construction and dredging sand+soil conditioner method showed most development while the effect of the plot with only the soil base of dredging sand stayed low. Another important method for the management of infertile, dredged soil base would be the removal of disturbing species which the experiment showed the tied relationship between the removal of disturbing species and development of seeding plants. Although this study was carried out focused on the Nakdong River Project, the study suggests the general management program that the removal of disturbing species such as Humulus japonicus Sieboid & Zucc. and Pueraria lobata (Willd.) Ohwi in times around rainy season(60days after seedling) would be effective for the easy growth of revegetation plants.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.179-190
• /
• 1997

To study the effects of chemical composition on the fusion temperatures of coal ashes, the chemical composition, mineral matter, and fusion temperature were studied with 54 kinds of coal ash samples including Korean anthracite coals. CaO, MgO and $Fe_2O_3$ were observed to be major fluxing elements in reducing and oxidizing atmosphere. The fluxing effect of $Fe_2O_3$ was increased more in reducing atmosphere. In a base/acid ratio, the fusion temperature decreased with increasing amounts of basic components. Nevertheless, the correlation between a fusion temperature and base/acid ratio was not shown well in a higher ratio of $Fe_2O_3/CaO$. The differences of fusion temperatures between oxidizing and reducing atmosphere showed close relationship with $SiO_2/Al_2O_3$ ratio rather than with $Fe_2O_3$ contents. Multiple regression was used to predict the fusion temperature of coal ashes, and it was established that the major predictors in oxidizing atmosphere were Base/Acid, $Fe_2O_3/CaO$, $SiO_2/Al_2O_3$, and $(SiO_2/A1_2O_3){\cdot}(Base/Acid)$ and Base/Acid, $Fe_2O_3/CaO$, $SiO_2$, and $TiO_2$ were major ones in reducing atmosphere.