• 한국지리정보학회지
• /
• 제12권4호
• /
• pp.169-181
• /
• 2009

국제해사기구(IMO)에서는 전자해도표시시스템(ECDIS)을 강제탑재 장비로 간주하는 SOLAS 수정안을 채택하였으며, 해상교통 안전과 환경보호를 위해 E-Navigation 전략에서 ECDIS를 핵심 장비로 고려하는 등, ECDIS에 탑재되는 전자해도는 항해 업무에 필수적인 정보 인프라가 되었다. 전자해도는 해도를 전자화한 전자 지도로서 해도의 모든 정보를 포함하고 있으나, 항해장비의 화면 축척이 해도의 기본 축척보다 소축척일 경우 해도 정보의 겹침 현상이 발생하여 정보 판독성이 떨어지는 문제점이 있다. 이에 본 연구에서는 전자해도 SCAMIN(Minimum Scale) 속성값 적용에 대한 국내외 현황 및 국제기준을 분석하고, 이를 기반으로 SCAMIN 속성 개선방안과 수심값 그룹핑을 통한 SCAMIN 속성값 재설정 방법을 제안 하였다.

• 한국정보통신학회논문지
• /
• 제11권6호
• /
• pp.1069-1076
• /
• 2007

DOCSIS 3.0 프로토콜은 채널-결합 기법을 기반으로 케이블망에서 망을 고도화하기 위해 제안된 표준이다. DOCSIS 프로토콜을 사용하는 망에서 망을 구성하는 CM과 CMTS간의 데이터 전송은 MAP 메시지를 통해 대역 요청과 전송 대역 할당을 받아 양방향 전송을 하기 때문에, MAP의 전송주기는 망 성능의 핵심적인 요소가 된다. 하지만 현재 표준안에서는 MAP의 구성요소와 용도에 대한 정의만 언급하고 있고, MAP 메시지의 전송주기에 대한 정의는 언급되어 있지 않다. 본 논문에서는 DOCSIS 3.0 기반의 케이블망에서 MAP 전송주기 에 따른 프로토콜의 성능을 평가하기 위해 OPNET을 통해 시뮬레이터를 개발하고, MAP 전송주기에 따른 망의 성능을 분석하였다. 성능 평가 결과 MAP 전송주기는 0.05sec일 때 최적의 망성능을 보임을 알 수 있었다. 본 연구의 결과는 DOCSIS 3.0 기반 케이블 망의 구축을 위한 중요한 성능 요소로 사용될 수 있다.

• Advances in Energy Research
• /
• 제4권3호
• /
• pp.189-202
• /
• 2016

This work emphasized optimum production of biodiesel using non-edible Prunus armeniaca (Bitter Apricot) oil via transesterification collected from the high altitude areas of Himachal Pradesh, India. In this study the author produced biodiesel through the process of transesterification by using an alkali catalyst with alcohol (methanol and ethanol), under the varying molar ratio (1:6, 1:9, 1:12), variable catalyst percentage (1% and 2%) and temperature ($70^{\circ}C$, $75^{\circ}C$, $80^{\circ}C$, $85^{\circ}C$). Furthermore, a few strong base catalysts were used that includes sodium hydroxide, potassium hydroxide, sodium metal and freshly prepared sodium methoxide. After screening the catalyst, response surface methodology (RSM) in connection with the central composite design (CCD) was used to statistically evaluate and optimize the biodiesel production operation using NaOH as catalyst. It was found that the production of biodiesel achieved an optimum level biodiesel yield with 97.30% FAME conversion under the following reaction conditions: 1) Methanol/oil molar ratio: 1:6, 2) Reaction time: 3h, 3) Catalyst amount: NaOH 2 wt. %, and 4) Reaction temperature: $85^{\circ}C$. The experimental results showed that the optimum production and conversion of biodiesel through the process of transesterification could be achieved under an optimal set of reaction conditions. The biodiesel obtained showed appropriate fuel properties as specified in ASTM, BIS and En- standards.

• 한국방재학회 논문집
• /
• 제11권2호
• /
• pp.15-21
• /
• 2011

복합재료가 건설 분야에서 보다 광범위하게 이용되기 위해서는 일반 기술자에게 이론을 쉽게 하기 위한 연구와 시험을 통한 데이터의 축적이 필요하다. 따라서 본 논문에서는 복합재료인 FRP 바닥판 부재의 따른 정적 및 피로성능을 평가하고 향후 FRP 바닥판의 해석 및 설계기준의 기초 자료를 제공하여 복합재료의 구조재 활용을 위한 기반기술을 제공하고자 하였다. 정적시험 결과 섬유방향 시험체가 섬유직각방향 시험체보다 큰 강성을 갖고 있으며 데이터 값이 훨씬 수렴되는 경향을 보이는바 이는 파괴과정에서 기지 배열에 따른 구조 특성으로 보다 안정적인 거동을 보이는 것을 알 수 있었다. 피로시험 결과 섬유방향 시험체는 섬유직각방향 시험체가 초기에 균열이 발생하는 것과 달리 시험체의 반복횟수가 증가하면서 파괴 직전에 균열을 확인할 수 있었으며, 접착면이 떨어지는 양상을 보였다.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.365-370
• /
• 2021

In this research, we proceeded with research on plasma resistance of the cleaning process of APS(Atmospheric Plasma Spray)-Y₂O₃ coated parts used for semiconductor and display plasma process equipment. CF₄, O₂, and Ar mixed gas were used for the plasma environment, and respective alconox, surfactant, and piranha solution was used for the cleaning process. After APS-Y₂O₃ was exposed to CF₄ plasma, the surface changed from Y₂O₃ to YF₃ and a large amount of carbon was deposited. For this reason, the plasma corrosion resistance was lowered and contamination particles were generated. We performed a cleaning process to remove the defect-inducing surface YF₃ layer and carbon layer. Among three cleaning solutions, the piranha cleaning process had the highest detergency and the alconox cleaning process had the lowest detergency. Such results could be confirmed through the etching amount, morphology, composition, and accumulated contamination particle analysis results. Piranha cleaning process showed the highest detergency, but due to the very large thickness reduction, the base metal was exposed and a large number of contaminated particles were generated. In contrast, the surfactant cleaning process exhibit excellent properties in terms of surface detergency, etching amount, and accumulated contamination particle analysis.

• 한국지진공학회논문집
• /
• 제25권2호
• /
• pp.83-91
• /
• 2021

Seismic designs for Korean nuclear power plants (NPPs) under earthquakes' design basis are noticed due to the recent earthquake events in Korea and Japan. Japan has developed the technologies and experiences of the NPPs through theoretical research and experimental verification with extensively accumulated measurement data. This paper describes the main features of the design-time history complying with the Japanese seismic design standard. Proper seed motions in the earthquake catalog are used to generate one set of design time histories. A magnitude and epicentral distance specify the amplitude envelope function configuring the shape of the earthquake. Cumulative velocity response spectral values of the design time histories are compared and checked to the target response spectra. Spectral accelerations of the time histories and the multiple-damping target response spectra are also checked to exceed. The generated design time histories are input to the reactor building seismic analyses with fixed-base boundary conditions to calculate the seismic responses. Another set of design time histories is generated to comply with Korean seismic design procedures for NPPs and used for seismic input motions to the same reactor containment building seismic analyses. The responses at the dome apex of the building are compared and analyzed. The generated design time histories will be also applied to subsequent seismic analyses of other Korean standard NPP structures.

• 융복합기술연구소 논문집
• /
• 제8권1호
• /
• pp.21-25
• /
• 2018

We developed nano-porous $TiO_2-SiO_2$ composites (commercial name : PTI, porous titania insulator) with low thermal conductivity as thermal insulating material as well as function of photocatalyst. The objectives of this paper are, firstly, to evaluate of the thermal conductivity of the PTI powder in the temperature range from -160 to $250^{\circ}C$, secondly to evaluate of thermal conductivities of insulation materials that is applied PTI powder. The structure of the PTI powder that has the pores size of 20-30 nm and the particle diameter of 2-10 nm. The PTI had a high surface area of $400m^2/g$ and a mean pore size of $45{\AA}$, which was fairly uniform. The thermal conductivity was measured by GHP(guarded hot plate) method and HFM(heat flux method). The PTI structure is a three-dimensional network nano-structures composed by a pearl-necklace that involved a precious stone in the center of the necklace. The thermal conductivities of PTI-PX powder by the GHP and HFM were 0.0366 W/m.K, 0.0314 W/m.K at $20^{\circ}C$, respectively. This is similar to values that are proportional to the square of the absolute temperature of the thermal conductivity of static air. The thermal conductivities of insulating sheets coated with PTI powder were similar results with that of the PTI powder.

• 대한통합의학회지
• /
• 제6권4호
• /
• pp.149-169
• /
• 2018

Purpose : This study was to develop a strategy for modeling future workforce projections to serve as a basis for analyzing annual supply of and demand for physical therapists across the South Korea into 2030. Methods : In-and-out movement model was used to project the supply of physical therapists. The demand was projected according to the demand-based method which consists of four-stages such as estimation of the utilization rate of the base year, forecasting of health care utilization of the target years, forecasting of the requirements of clinical physical therapists and non-clinical physical therapists based on the projected physical therapists. Results : Based on the current productivity standards, there will be oversupply of 39,007 to 40,875 physical therapists under the demand scenario of average rate in 2030, undersupply of 44,663 to 49,885 under the demand scenario of logistic model, oversupply of 16,378 to 19,100 under the demand scenario of logarithm, and oversupply of 18,185 to 20,839 under the demand scenario of auto-regressive moving average (ARIMA) model in 2030. Conclusion : The result of this projection suggests that the direction and degree of supply of and demand for physical therapists varied depending on physical therapists productivity and utilization growth scenarios. However, the need for introduction of a professional physical therapist system and the need to provide long-term care rehabilitation services are actively being discussed in entering the aging society. If community rehabilitation programs for rehabilitation of disabled people and the elderly are activated, the demand of physical therapists will increase, especially for elderly people. Therefore, healthcare policy should focus on establishing rehabilitation service infrastructure suitable for an aging society, providing high-quality physical therapy services, and effective utilization of physical therapists.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.59-64
• /
• 2019

In recent years, the HP-CRTM method, which has the ability to produce carbon fiber-reinforce plastic composites at high speeds, has come into the spotlight in the automotive parts industry, which demands high productivity. Multi-axial carbon fabric, an intermediate material used in this HP-CRTM molding process, consists of layered fibers without crimp, which makes it better in terms of tensile and shear strength than the original woven fabrics. The NCF (non-crimp fabric) can form the layers of the carbon fiber, which have different longitudinal and lateral directions, and ${\pm}{\theta}$ degrees, depending on the product's properties. In this research, preforms were made with carbon fibers of ${\pm}45^{\circ}$ and $0/90^{\circ}$, which were lamination structures under seven different conditions, in order to create the optimal laminated structure for automobile reinforcement center floor tunnels. Carbon fiber composites were created using each of the seven differently laminated preforms, and polyurethane was used as the base material. The specimens were manufactured in accordance with the ASTM D3039 standards, and the effect of the NCF lamination structure on the mechanical properties was confirmed by a tensile test.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제25권2호
• /
• pp.37-50
• /
• 2019

Purpose: The purpose of this study was to analyze the space planning of the Senior Center which was supplied recently in apartment complex, to activate the spaces suitable for the changes and needs of the elderly and to explore the complex functions as a community space where intergenerational exchanges are possible. In other words, we sought implications for the physical plan of the district as a community base space and searched for improvement plan. Methods: The survey was conducted by five large private sectors of construction, and 10 of them were built after 2010 in an urban area(Seoul). Literature review, data analysis, field survey and interview were used for the research method. Results: As a result, it was difficult to meet the demands of various elderly people in the space planning, program and operation mode at the current level. In particular, the Baby Boomer generation as an active silver generation will not use the Senior Center. Therefore, based on the results of the survey, we propose some of the following about the Senior Center in apartment complex. First, it is necessary to change the term "the Senior Center" as defined in Article 55-2 of the "Regulations on Housing Construction Standards, etc.". Second, the criteria for setting up the elderly complex space should be presented specifically. Third, it is necessary to secure financial resources in operation and management. Finally, it is necessary to support the residents' organization for community revitalization. Implication: Through the amendment of the laws, it will be possible for various generations to have opportunities to interact by activating the existing community spaces for seniors. It will also contribute to improving the community of apartment complexes.