• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.33-38
• /
• 2008

For study on the unsteady blockage effect, flows around a rotationally oscillating circular cylinder with relatively low forcing frequency in closed test-section wind tunnels have been numerically investigated by solving compressible Navier-Stokes equations. The numerical scheme is based on a node-based finite-volume method with the Roe's flux-difference splitting and an implicit time-integration method coupled with dual time-step sub-iteration. The computed results of the oscillating cylinder in the test section showed that the fluctuations of lift and drag are augmented by the blockage effects. The drag further increases because of low base pressure. The pressure on the test section wall shows the harmonics having the oscillating and the shedding frequencies contained in the blockage effect.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.74-74
• /
• 2003

• 한국항공운항학회지
• /
• 제20권2호
• /
• pp.1-6
• /
• 2012

Four dimensional(4-D) trajectory modeling is conducted based on flight plan. The flight plan is divided into several segments which represent certain operating flight modes. Thrust, drag and fuel consumption rate of an aircraft are calculated using BADA provided by Eurocontrol. The trajectory is modeled with the rate of climb/descent calculated with Total-Energy Equation. The simulation results with a typical aircraft and its flight plan indicate that the trajectory modeled corresponds well with the suggested flight plan. The performance profiles including total endurance time and time history for speed, thrust, drag and fuel consumption were also appropriately generated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1998년도 제11회 학술강연회논문집
• /
• pp.22-22
• /
• 1998

155mm 탄에 항력감소장치를 부착하여 탄의 비행중에 형성되는 탄저부의 항력(Base drag)을 감소시켜 사거리를 연장한 무기체계가 미국 등을 비롯한 많은 국가에서 실용화되고 있다. 국과연은 이미 155mm 신형 자주포탄에 적용되는 항력감소장치(항력감소제 그레인, Base & Closure, 점화장치)는 개발하여 사거리를 연장(약 35%)한 것으로 보고하고 있다. 본 연구는 추후 실용화가 예상되는 155mm 성능개량형 DPICM탄(미제 M864급)에 적용할 수 있는 항격감소제용 저연소속도 혼합형 추진제 개발을 목표로 하여, 이에 동등한 추진제 특성(기계적성질, 연소특성, 접착력, 발열량 등)을 가지는 추진제, 라이너(Inhibitor)의 조성개발을 실시하였다. 그리고 개발된 혼합형 추진제 조성의 성능(사거리 및 분산도)을 확인하기 위하여 항력감소제용 그레인을 제작, 155mm 성능개량형 DPICM탄에 적용하여 발사시험을 실시하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.491-496
• /
• 2000

The physics of the flow field surrounding an engine nacelle afterbody is very complex. A high pressure jet from the nozzle interacts with the external flow and causes upstream influence on the afterbody surface field. At certain conditions, the nozzle boundary layer can separate, either by shock wave interaction or by adverse pressure gradient effect, resulting in a severe drag penalty. Furthermore, a finite afterbody base implies a recirculating flow region. A flow modeling method has been developed to analyze the flow in the annular base(rear-facing surface) of a circular engine nacelle flying at subsonic speed but with a supersonic exhause jet. Real values of exhaust gas properties and temperature are included.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.723-728
• /
• 2008

We performed numerical analysis of base drag phenomenon, when a projectile with backward step flies into atmosphere at supersonic speed. We compared with other researchers. From our previous studies that were 2-dimensional simulation, we found out from sophisticated simulations that need dense mesh points to compare base pressure and velocity profile after from base with experimental data. Therefore, we focus on high order spatial disceretization over 3rd order with TVD such as MUSCL TVD 3rd, 5th, and WENO 5th order, and Limiters such as minmod, Triad. Moreover, we enforce to flux averaging schemes such as Roe, RoeM, HLLE, AUSMDV. In present, one dimensional result of Euler tests, there are Sod, Lax, Shu-Osher and interacting blast wave problems. AUSMDV as a flux averaging scheme with MUSCL TVD 5th order as spatial resolution is good agreement with exact solutions than other combinations. We are carrying out the same approaches into 3-dimensional base flow only candidate flux schemes that are Roe, AUSMDV. Additionally, turbulence models are used in 3-dimensional flow, one is Menter s SST DES model and another is Sparlat-Allmaras DES/DDES model in Navier-Stokes equations.

• Advances in aircraft and spacecraft science
• /
• 제7권3호
• /
• pp.203-214
• /
• 2020

In many applications like the aircraft or the rockets/missiles, the flow from a nozzle needs to be expanded suddenly in an enlarged duct of larger diameter. The enlarged duct is provided after the nozzle to maximize the thrust created by the flow from the nozzle. When the fluid is suddenly expanded in an enlarged duct, the base pressure is generally lower than the atmospheric pressure, which results in base drag. The objective of this research work is to optimize the length to diameter (L/D) ratio of the enlarged duct using the CFD analysis in the flow field from the supersonic nozzle. The flow from the nozzle drained in an enlarged duct, the thrust, and the base pressure are studied. The Mach numbers for the study were 1.5, 2.0 and 2.5. The nozzle pressure ratios (NPR) of the study were 2, 5 and 8. The L/D ratios of the study were 0.5, 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10. Based on the results, it is concluded that the L/D ratio should be increased to an optimum value to reattach the flow to an enlarged duct and to increase the thrust. The supersonic suddenly expanded flow field is wave dominant, and the results cannot be generalized. The optimized L/D ratios for various combinations of flow and geometrical parameters are given in the conclusion section.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.105-109
• /
• 2004

CFD simulation for Smart-UAV(TR-E2Sl) is performed to analyze its aerodynamic characteristics. Base geometry and several cases, decided by control surfaces being deflected, are simulated. To obtain the better lift characteristics, the elevator should be deflected between 10o and 20o with the incidence angle of the wing 1o.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.134-137
• /
• 2007

Aero-Heating phenomenon is one of the severe problems occurring in high speed missile flight. in the high speed flight, not only stagnation point but also aft body parts encounter high temperature related structural problems. But the phenomenon is not easy to predict accurately because unsteady calculation according to a flight trajectory is needed, and takes much time. In this Paper, a fast and precise scheme is introduced, which calculates heat flow and temperature by simple pressure field prediction on a missile.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1999년도 제12회 학술강연회논문집
• /
• pp.19-19
• /
• 1999

155mm 탄에 항력감소장치(Base Bleed Unit)를 부착하여 탄의 비행중에 형성되는 탄저부의 항력(Base Drag)을 감소시켜 사거리를 연장하는 무기체계가 미국을 비롯한 많은 국가에서 실용화되고 있다. 국내에서는 국과연 주관사업으로 이미 신형자주포에 적용되는 155mm 탄의 항력감소장치를 개발, 사거리 약 35%를 증가하여 실용화 단계에 있다. 또한 최근에는 미제 M864급인 155mm 성능개량 DPICM(Dual purpose Improved Conventional Munition)탄과 동등 성능을 갖는 탄의 개발이 요구되어, 이의 항력감소제인 저연소속도 추진제를 개발하여 155mm DPICM탄에 적용한 결과 약 20%의 사거리가 증가된 미제와 동등한 성능의 항력감소제를 개발하여, 이를 보고한바 있다.