Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2010.06a
/
pp.264-264
/
2010
Single-walled carbon nanotubes (SWCNTs) were grown on a Si wafer by using thermal chemical vapor deposition (t-CVD). We investigated the effect of the catalyst deposition rate on the types of CNTs grown on the substrate. In general, smaller islands of catalyst occur by agglomeration of a catalyst layer upon annealing as the catalyst layer becomes thinner, which results in the growth of CNTs with smaller diameters. For the same thickness of catalyst, a slower deposition rate will cause a more uniformly thin catalyst layer, which will be agglomerated during annealing, producing smaller catalyst islands. Thus, we can expect that the smaller-diameter CNTs will grow on the catalyst deposited with a lower rate even for the same thickness of catalyst. The 0.5-nm-thick Fe served as a catalyst, underneath which Al was coated as a catalyst support as well as a diffusion barrier on the Si substrate. The catalyst layers were. coated by using thermal evaporation. The deposition rates of the Al and Fe layers varied to be 90, 180 sec/nm and 70, 140 sec/nm, respectively. We prepared the four different combinations of the deposition rates of the AI and Fe layers. CNTs were synthesized for 10 min by flowing 60 sccm of Ar and 60 sccm of $H_2$ as a carrier gas and 20 sccm of $C_2H_2$ as a feedstock at 95 torr and $810^{\circ}C$. The substrates were subject to annealing for 20 sec for every case to form small catalyst islands prior to CNT growth. As-grown CNTs were characterized by using field emission scanning electron microscopy, high resolution transmission electron microscopy, Raman spectroscopy, UV-Vis NIR spectroscopy, and atomic force microscopy. The fast deposition of both the Al and Fe layers gave rise to the growth of thin multiwalled CNTs with the height of ${\sim}680\;{\mu}m$ for 10 min while the slow deposition caused the growth of ${\sim}800\;{\mu}m$ high SWCNTs. Several radial breathing mode (RBM) peaks in the Raman spectra were observed at the Raman shifts of $113.3{\sim}281.3\;cm^{-1}$, implying the presence of SWCNTs (or double-walled CNTs) with the tube diameters 2.07~0.83 nm. The Raman spectra of the as-grown SWCNTs showed very low G/D peak intensity ratios, indicating their low defect concentrations.
Human polymorphonuclear leukocytes(PMN) are the most numerous host cell in periodontal pockets and their presumed role is to form a protective barrier between the bacteria and periodontal tissues. Microbial component LPS activates macrophages to produce $IL-1{\beta}$, $MIP-1{\alpha}$, $-1{\beta}$, $TNF-{\alpha}$ and IL-6, etc. These cytokines have autocrine function to the macrophages, and paracrine function to other cell such as PMN and affect them to produce some biological functions. In the present study, human PMN were tested for the expression of $IL-1{\beta}$ and $MIP-1{\alpha}$ mRNA. Also we performed the receptor binding assay and in vitro assay for the antimicrobial action of HL-60 cell to determine whether HL-60 can replace the peripheral PMN in analyzing the biological functions. PMN were stimulated with $IL-1{\beta}$, TPA, $MIP-1{\alpha}$, LPS, IL-2 and total cytoplasmic RNA were extracted for the northern blot analysis. In order to determine the induction kinetics of $IL-1{\beta}$ or $MIP-1{\alpha}$ mRNA expression, cells were stimulated for 0,1,2,3 hours. We found peak expression of $IL-1{\beta}$ mRNA after 1hr of induction with $IL-1{\beta}$, LPS and after 2hr of induction with TPA. $MIP-l{\alpha}$ also induced but a scarce $IL-l{\beta}$ message from PMN. In contrast to the $IL-l{\beta}$ mRNA expression, $MIP-1{\alpha}$ were not induced from PMN in any culture conditions. Receptors for $MIP-1{\alpha}$ were identified on dibutyryl cyclic AMP(dbcAMP)-treated HL-60 as well as peripheral PMN. dbcAMP treatment significantly enhanced antimicrobial action of undifferentiated HL-60 cell. MIP-1 further increased enhancing effect of dbcAMP. $IL-1{\beta}$, to a lesser extent, also increased dbcAMP-induced enhancing effect of antimicrobial action of HL-60 cell.
Trichloroethylene (TCE) is a representative dense non-aqueous phase liquid (DNAPL) and has contaminated substance environments including soil and groundwater due to leakage and careless. DNPAL, has been treated by surfactant-enhanced aquifer remediation (SEAR). After application of SEAR, groundwater contains still surfactant as well as little amount of residual TCE. Permeable reactive barrier using zero-valent iron (ZW) is a very effective technology to treat the residual TCE in groundwater. In this study, the effect of the residual surfactant on the reductive dechlorination of residual TCE was investigated using ZVI. Mixed surfactant composed of nonioinic surfactant and cationic surfactant was used as a residual surfactant because of toxicity and enhancement of dechlorination rate. Structure of surfactant affected significantly the decrhlorination rate of TCE. Mixed surfactant system with relatively short polyethylene oxide (PEO) chain in nonionic surfactant, cationic surfactant did not affect TCE dechlorination rate. However, mixed surfactant system with relatively long PEO chain in nonionic surfactant shows that TCE dechlorination rate was significantly dependent on fraction of cationic surfactant and HLB of nonionic surfactant. Cationic surfactant with trimethyl ammonium group enhanced reductive dechlorination rate compared to that surfactant with pyridinium group.
Kim, Chong-Kwan;Cho, Kyoo-Sung;Chai, Jung-Kiu;Choi, Eun-Jeong;Moon, Ik-Sang;Choi, Seong-Ho
Journal of Periodontal and Implant Science
/
v.23
no.3
/
pp.359-373
/
1993
The ultimate objective of periodontal therapy is not only stopping the progression of periodontal disease, but also promoting the regeneration of lost periodontal tissue. Guided Tissue Regeneration, which is based on the principle that the goal of periodontal regeneration can be achieved by preventing apical migration of gingival epithelium and blocking cells originating from connective tissue, has been developed and used as a clinical procedure, and although it has shown excellent results in connective tissue healing, there have not been many studies showing its effect on the regeneration of alveolar bone loss due to periodontal disease. The objectives of this study are to investigate the result of 12 months-long treatment following guided tissue regeneration using expanded polytetrafluoroehylene membrane, and to observe the presence of regenerated alveolar bone. Forty-one teeth from 28 patients with clinical diagnosis of periodontitis has been selected. In fifteen of those interproximal intrabony defects, only flap operation had been carried out, and designated as the control group. Twenty-six intrabony defects received e-PTFE membrane following flap operation, and designated as the experimental group. Eleven teeth whose membrane had been exposed were excluded from the experiment. Various measurements including probing depth, loss of attachment, probing bone level and gingival recession have been recorded at 6th month and 12th month, and the significance of the changes has been analyzed. The results are as follows: 1. Probing depth at 6th and 12th month has shown a significant decrease in both groups (p<0.01), but significantly higher decrease was found in the experimental group compared to the control at the month(p<0.05). 2. Loss of attachment at 6th and 12th month has shown a significant decrease in both groups, but significantly higher decrease was found in the experimental group compared to the control (p<0.05). 3. Probing bone level at 6th and 12th month has shown a insignificant decrease in the control group and significant decrease in the experimental group (p<0.01). Significantly higher decrease in probing bone level was found in the experimental group (p<0.05). 4. Gingival recession at 6th and 12th month has shown a statistically significant increase (p<0.05), and the control group showed higher increase compared to the experimental group although no statistical significance was found. As these results have shown, the use of e-PTFE membrane in intrabony pockets results in marked decrease in the loss of attachment and probing bone level. This seems to indicate that e-PTFE membrane may play a role in alveolar bone regeneration in intrabony defects.
Skin is a physical barrier against diverse injury and damages. Exposure to ultraviolet (UV) radiation causes detrimental skin injuries such as inflammation and cell death. The value of natural pigments could be applied to many usages including cosmetics. This study was conducted to examine the protective effect of natural pigments extracted from mulberry, balsam pear, purple-colored sweet potato, pehmannia root, gardenia fruit, and black rice against UV-induced cell death in HaCaT cells, human keratinocyte cell lines. In the present study, the exposure of 50 mJ/$cm^2$ UV-B for 24 hr induced cell death in HaCaT cells, which was prevented by the pretreatment of extracts of mulberry, balsam pear, purple-colored sweet potato, rehmannia root, gardenia fruit, and black rice. In addition, the exposure of 50 mJ/$cm^2$ UV-B for 24 hr also increased lipid peroxide (LPO) formation, compared to control in HaCaT cells, which was prevented by the pretreatment of extracts of mulberry, balsam pear, purple-colored sweet potato, rehmannia root, gardenia fruit, and black rice. In conclusion, the extracts of mulberry, balsam pear, purple-colored sweet potato, rehmannia root, gardenia fruit, and black rice prevented the UV-B-induced cell apoptosis via the inhibition of oxidative stress in HaCaT cells.
The purpose of this study investigated the effect of Au coating on adhesion between porcelain matrix and metal substructure interface. Titanium, Ni-Cr alloy and Co-Cr alloy are well known as proper metal for the dental restorations. The success of a porcelain fused to metal (PFM) restoration depends upon the quality of the porcelain-metal bond. However, adhesion between dental alloys and porcelain is related to diffusion of oxygen during ceramic firing. The excessive oxidized layers make hard adhesion between dental alloy and ceramic. Ni-Cr and Co-Cr specimens were divided into test and a control group and Titanium specimens were divided into three test groups and a control group. Each group had 20 specimens. The adhesion characteristics of porcelain and metal with Au coating layer and without Au coating layer were observed with scanning electron microscopy(SEM). The adhesion was evaluated by a biaxial flexure test and volume fraction of adherent porcelain was determined by SEM/EDS analysis. Result of this study suggest that Au coating layer is effective barrier to diffuse oxide layer completely protect non-precious alloys from oxidation during the porcelain firing. The SEM photomicrographs of cross-section specimens showed a smooth interface between Au coating layer and metals and porcelain which suggested proper chemical bonding, and no gap, porosity were observed. The mode of failure was mainly adhesive for Ti tested specimens, but mixed failures with adhesive and cohesive were observed in Ni-Cr and Co-Cr specimens. The adhesion between non-precious metals and porcelain would not be improved by Au coating agent. However, It is suggested that the continuous study is required further investigation and development.
Journal of the Society of Cosmetic Scientists of Korea
/
v.36
no.2
/
pp.115-120
/
2010
The formidable barrier property of the stratum cornemum and the high hydrophilicity of active ingredient make it difficult to permeate through the skin and reach to its site of action. The aim of this study was to investigate the effect of chemical penetration enhancers on the skin permeation of a hydrophilic cosmetic active ingredient, such as arbutin. The enhancing effects of N-methyl-2-pyrrolidone (NMP) on the permeation of a hydrophilic cosmetic active ingredient were evaluated by using Franz diffusion cell. The study indicated that NMP has considerable influence on the skin permeability. NMP was not only the most effective enhancer but also increased the skin permeability of arbutin approximately 1.3~1.5 fold compared with control without penetration enhancer. The lag time did not change with NMP, which suggested no effect of NMP on skin lipid fluidity. This suggest that arbutin co-permeated with NMP. The results indicate NMP is effective enhancer of a hydrophilic cosmetic active ingredient in penetration, with potential applications for drug delivery system.
The study was performed to evaluate the effect of landfill leachate on the hydraulic conductivity of Geosynthetic Clay Liner (GCL) with two types of leachate. GCL used in waste landfills have a significant ability as a barrier material, however, they also have a potential danger when exposed to some organic and inorganic leachate as well as humic materials. In this study, swelling tests and hydraulic conductivity tests were performed to evaluate the effect of humic materials and landfill leachate on the hydraulic characteristics of the GCL. The result of swelling tests showed that the amount of humic materials and high electronic conductivity caused a decrease of the swelling of bentonite. This is expected to increase the hydraulic conductivity of GCL. The increasing of hydraulic conductivity observed for GCL permeated with 0-leachate was significantly higher than that of Y-leachate. This result shows that humic materials are obviously affecting with the increasing of hydraulic conductivity of GCL.
Journal of the Society of Cosmetic Scientists of Korea
/
v.42
no.2
/
pp.163-171
/
2016
Steroid hormone, glucocorticoid (GC) has strong anti-inflammatory effects by binding to glucocorticoid receptor (GR) inhibiting the expression of inflammatory genes. Therefore, agents that activate the GR have been used for the treatment of dermatitis. However, the agents have side effects such as skin barrier dysfunction and dermal atrophy, inducing skin damage as well as skin aging. It has been reported that GC is activated by 11 beta-hydroxysteroid dehydrogenase type 1 ($11{\beta}$-HSD1) to increase the activity of the GR. This study aimed to identify natural materials that can effectively inhibit dexamethasone. We found that alpinetin isolated from Alpinia katsumadai extract has a significant effect on this. Alpinetin not only inhibited $11{\beta}$-HSD1 expression, but also suppressed the increase of phosphorylated GR and cortisol concentration. Alpinetin also recovered collagen expression in dexamethasone-treated dermal fibroblasts, and the reduction of dermal thickness in dexamethasnone-treated 3D skin model. These results suggest that alpinetin prevents skin aging induced by the increase of $11{\beta}$-HSD1 expression.
Journal of the Korean Applied Science and Technology
/
v.38
no.3
/
pp.870-882
/
2021
Coptis chinensis has been used in the treatment of various diseases such as soothing, anti-inflammation, antimicrobial and antipyretic in oriental traditional medicine. In this study, we investigated the effect of hot water extract of Coptis chinensis(CCW) on skin barrier and inflammation-related factors in UVB and TNF-α/IFN-γ-induced HaCaT cells and evaluated its potential as a moisturizing and anti-inflammatory material. Based on result, the amount of HA (Hyaluronic acid) production and protein and mRNA expression of filaggrin were measured. In TNF-α/IFN-γ-induced HaCaT cells, CCW increased the amount of HA production in a concentration-dependent manner. In the measurement of protein and mRNA expression of filaggrin, the expression rate increased as the concentration of CCW increased. In UVB-induced HaCaT cells, CCW decreased the production of ROS and showed significant results with EGCG ((-)-epigallocatechin-3-gallate), a positive control. In addition, CCW inhibited the expression of inflammatory cytokines TNF-α, IL-1β, IL-6, and IL-8 in TNF-α/IFN-γ-induced HaCaT cells. It was confirmed that the protein and mRNA expression of COX-2, a major factor in skin inflammation, was decreased in a concentration-dependent manner. These results suggest that hot water extract from Coptis chinensis can be used as a cosmetic material having a moisturizing and anti-inflammatory effect.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.