• Korean Journal of Materials Research
• /
• v.17 no.4
• /
• pp.185-191
• /
• 2007

The purpose of this study is to evaluate the thin fihn dielectric made of hybrid sol, which consist of barium titanate powder, polymeric sol and other polymers. This sol will be used dielectric applied to small, thin electric passive components such as MLCC(Multi Layer Ceramic Condenser), resister, inductor. This sol is composed of mixed fine barium titanate powder and polymeric sol including Ba, Ti-precursor, solvent, chelating agent, chemical reaction catalyst, the additive sols to improve fired densification and temperature reliability. First at all, we mixed hybrid sol to be dispersed and be stabilized by ball milling for 24hrs. By spin coating method, we makes thin film dielectric on the convectional green sheet for MLCC. After heat treatments, we analyzes the structure morphology, physical, electrical properties and X5R Temperature properties.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.299-301
• /
• 1989

This study presents a method of preparing $YBa_2Cu_3O_{7-x}$ ceramic and chlorine doping in it for the purpose of Jc enhancement us ins sol-gel process.Tetramethylammonium-hydroxide and pottasium carbonate solution were added to the aqueous solution of Yttrium nitrate, Barium chloride and Copper nitrate for pH control as well as forming hydroxy-carbonate precipitation. Instead of Barium nitrate, Barium chloride was used for doping chloride impurities in the specimen. The resulted materal showed good high Tc-superconductivity after calcination. Tc and Jc value are 92 K and 120.8 $A/cm^2$ respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.374-377
• /
• 2003

Sol-gel processing of BaTiO$_3$ ceramics doped with La(0.01-1.00 at.%) were prepared from metal barium, titanium n-butoxide and lanthanum isopropoxide. Characterization of the sol-gel-derived powder using XRD, SEM is also reported. The obtained results suggested that insulator to semiconductor transition for highly donor-doped barium titanate was closely related to the incorporation of donor into the grains and to the resultant grain size, which were significantly affected by the sinterability of BaTiO$_3$ powders and sintering conditions used.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.144-148
• /
• 2000

A modification of the sol-gel method to obtain phase pure superconducting oxides is described. The method starts from organic salts of yttrium, barium and copper, such as acetates, and avoids the sudden and uncontrollable decomposition of the organic fraction which occurs if nitrates are used as starting materials. The aqueous solution obtained with citric acid in an alkaline medium is concentrated under vacuum. The solid so prepared is decomposed at about $300^{\circ}C$ thus giving an oxide precursor containing well dispersed yttrium, barium and copper. Pyrolysis at 850 - $920^{\circ}C$ followed by oxygen annealing gives the superconducting orthorhombic 123 phase. The results of TGA/DTA of the precursor, as well as XRD, electrical and magnetic property measurements on the pyrolysis products are presented and discussed.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.3
• /
• pp.246-252
• /
• 2007

$BaTiO_3$ powders were prepared by sol-gel method from different concentration of KOH aqueous solution and Ba/Ti molar ratio. Particle shape, size and crystal structure of prepared $BaTiO_3$ powders were analyzed by SEM, XRD, and FT-IR. As the result of KOH concentration changing, spherical particles were obtained by condition more than 3 M and particle size decreased as concentration increasing. Different appearance showed between dried and sintered powders against changing of Ba/Ti molar ratio. In case of dried powders, the crystallinity decreased as molar ratio increasing. On the other hand, increased as molar ratio increasing in case of sintered powders.

• Journal of information and communication convergence engineering
• /
• v.1 no.1
• /
• pp.31-34
• /
• 2003

Sol-gel processing of $BaTiO_{3}$ ceramics doped with La (0.01∼1.00 at.%) were prepared from metal barium, titanium n-butoxide and lanthanum isopropoxide. Characterization of the sol-gel-derived powder using XRD, SEM is also reported. The obtained results suggested that insulator to semiconductor transition for highly donor-doped barium titanate was closely related to the incorporation of donor into the grains and to the resultant grain size, which were significantly affected by the sinterability of $BaTiO_{3}$ powders and sintering conditions used.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.287-290
• /
• 2003

Sol-gel processing of $BaTiO_3$ ceramics doped with La(0.01~1.00 at.%) were prepared from metal barium, titanium n-butoxide and lanthanum iso-propoxide. Characterization of the sol-gel-derived powder using XRD, SEM is also reported. The obtained results showed that insulator to semiconductor transition for highly donor-doped barium titanate was closely related to the incorporation of donor into the grains and to the resultant grain size, which were significantly affected by the sinterability of $BaTiO_3$ powders and sintering conditions used.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.120-123
• /
• 2000

This paper reports a newly developed sol-gel process to synthesize dense YBCO thick films with BaTiO$_3$additives using electrophoretic deposition and metal alkoxide sol/particle suspension, which we successfully produce dense $YBCO+BaTiO_3$ ceramics at a rather low temperature, compared with the sintering temperature used in conventional methods. The thick films of HTS were prepared by electrophoretic deposition, using pre-sintered powder with barium titanate addition in the form of $BaTi(OR)_6$ solution in suspension for electrophoresis. The conditions for applied voltage and deposition times for electrophoretic deposition of HTS thick films were studied in detail.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.120-123
• /
• 2000

This paper reports a newly developed sol-gel process to synthesize dense YBCO thick films with $BaTiO_3$ additives using electrophoretic deposition and metal alkoxide sol/particle suspension, which we successfully produce dense $YBCO+BaTiO_3$ ceramics at a rather low temperature, compared with the sintering temperature used in conventional methods. The thick films of HTS were prepared by electrophoretic deposition, using pre-sintered powder with barium titanate addition in the form of $BaTi(OR)_6$ solution in suspension for electrophoresis. The conditions for applied voltage and deposition times for electrophoretic deposition of HTS thick films were studied in detail.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2004.04b
• /
• pp.44.3-44.3
• /
• 2004