• Title/Summary/Keyword: Bare Life

Search Result 77, Processing Time 0.234 seconds

ECG Measurement Method during Sleep with Array of Capacitive Electrodes Attached to Bed (침대에 부착된 용량성 전극 배열을 이용한 수면 중의 심전도 측정)

  • Lim, Y.G.;Kim, K.K.;Park, K.S.;Jeong, D.U.
    • Proceedings of the IEEK Conference
    • /
    • 2005.11a
    • /
    • pp.521-524
    • /
    • 2005
  • In order to measure ECG in daily life, a new ECG measurement method on bed was developed. The provided method does not require any direct conductive contact between the instrument and bare skin, so that it does not cause the uncomfortable feel of touch and the possible skin trouble which are typical shortcomings of the conventional conductive contact ECG measurement. The provided method utilized an array of high-input-impedance active electrodes fixed on the mattress and an indirect-skin-contact ground made of a large conductive textile sheet and laid on lower area of the mattress. A thin cotton bedcover covered the mattress, the electrodes, and the conductive textile and subjects lay on the mattress over the bedcover. ECG was obtained successfully. However its signal quality is lower and the motion artifact is larger than direct-contact measurement. Careful measurement setup was needed to reduce the motion artifact originated from variation in static electricity. From the ECG obtained by the provided method, R-peak could be discriminated easily and the information about the position and the posture of the subject could be obtained.

  • PDF

The Influence of Shoes with Different Heels on Movement of Lower Limb Joints during Sit-to-stand (일어서기 동작 시 발 뒷굽의 형태가 하지 관절 움직임에 미치는 영향)

  • Kim, Yun-Jin;Park, Ji-Won
    • The Journal of Korean Physical Therapy
    • /
    • v.25 no.2
    • /
    • pp.117-125
    • /
    • 2013
  • Purpose: The purpose of this study was to investigate changes in movement strategies of lower limb joints depending on the type of heel during sit-to-stand. Methods: Twenty healthy females participated in this study. All subjects performed sit-to-stand three times each with three different types of heels - bare feet, 9 cm high-heeled shoes, and unstable shoes. Trails were conducted in random order. Three-dimensional motion analysis systems were used for collection and analysis of the kinematic data of lower limb movements. Results: Results of this study showed kinematic differences in pelvis, hip joints, knee joints, and ankle joints during sit-to-stand based on the type of heels. At the initial sit-to-stand, hip joint flexion, knee joint flexion, ankle joint flexion, and ankle joint inversion showed significant differences. The maximal angles of hip joint flexion, hip joint adduction, knee joint flexion, ankle joint flexion, and ankle joint inversion were significantly different, while hip joint adduction, pelvic forward tilt, hip joint rotation, knee joint flexion, ankle joint flexion, and ankle joint inversion differed significantly during the terminal of sit-to-stand. Conclusion: Therefore, the type of heel played an important role in selection of lower limb movements during sit-to-stand which were essential parts of daily life movements.

Development of OLED Passivation Method for High efficency and life time (고효율 및 장수명의 OLED Passivation 기술 개발)

  • Han, Jin-Woo;Kim, Jong-Hwan;Kim, Young-Hwan;Seo, Dae-Shik;Kim, Yong-Hoon;Moon, Dae-Gyu;Han, Jeong-In
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2005.11a
    • /
    • pp.267-268
    • /
    • 2005
  • In this paper, the inorganic-organic thin film encapsulation layer was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, Sputter and Spin-Coater system, the various kinds of inorganic and organic thin-films were deposited onto the Ethylene Terephthalate(PET) and their interface properties between organic and inorganic layer were investigated. In this investigation, the SiON and Polyimide(PI) layer showed the most suitable properties. Under these conditions, the WVTR(water vapour transition rate) for PET can be reduced from level of 0.57 g/$m^2$/day (bare subtrate) to $1{\times}10^{-5}$ /$m^2$/day after application of a SiON and Polyimide layer. These results indicates that the SiON/PI/SiON/PI/PET barrier coatings have high potential for flexible organic light-emitting diode(OLED) applications.

  • PDF

Flexible poly(vinyl alcohol)-ceramic composite separators for supercapacitor applications

  • Bon, Chris Yeajoon;Mohammed, Latifatu;Kim, Sangjun;Manasi, Mwemezi;Isheunesu, Phiri;Lee, Kwang Se;Ko, Jang Myoun
    • Journal of Industrial and Engineering Chemistry
    • /
    • v.68
    • /
    • pp.173-179
    • /
    • 2018
  • Electrochemical characterization was conducted on poly(vinyl alcohol) (PVA)-ceramic composite (PVA-CC) separators for supercapacitor applications. The PVA-CC separators were fabricated by mixing various ceramic particles including aluminum oxide ($Al_2O_3$), silicon dioxide ($SiO_2$), and titanium dioxide ($TiO_2$) into a PVA aqueous solution. These ceramic particles help to create amorphous regions in the crystalline structure of the polymer matrix to increase the ionic conductivity of PVA. Supercapacitors were assembled using PVA-CC separators with symmetric activated carbon electrodes and electrochemical characterization showed enhanced specific capacitance, rate capability, cycle life, and ionic conductivity. Supercapacitors using the $PVA-TiO_2$ composite separator showed particularly good electrochemical performance with a 14.4% specific capacitance increase over supercapacitors using the bare PVA separator after 1000 cycles. With regards to safety, PVA becomes plasticized when immersed in 6 M KOH aqueous solution, thus there was no appreciable loss in tear resistance when the ceramic particles were added to PVA. Thus, the enhanced electrochemical properties can be attained without reduction in safety making the addition of ceramic nanoparticles to PVA separators a cost-effective strategy for increasing the ionic conductivity of separator materials for supercapacitor applications.

Roland Giguère and Poetic Landscape - La main au feu (롤랑 지게르와 시의 풍경 - 『불 위의 손』을 중심으로)

  • Kim, Yong Hyun
    • Cross-Cultural Studies
    • /
    • v.39
    • /
    • pp.153-176
    • /
    • 2015
  • Poet, painter and publisher, Roland $Gigu{\grave{e}}re$ is one of Quebec's outstanding figures, inspired by both Surrealism and Quebec nationalism. He participated in contemporary artistic movement 'Phases' and influenced collective self-awareness and political ferment, 'Quiet Revolution'. In La Main au feu(1973), his poetry represent a landscape dominated by darkness in contrast with red color of fire from the volcanic crater. The world is immersed in darkness of despair which allude to the Great Darkness of Quebec society. Acts of violence assume many different forms: crows, black rain, dark flow, frenzy of knife blows. Both things and humans are in the state of absence or lack. Life falls into opacity of death. In the background of dark landscape, we discover Miror, a singular character. Similar to chain of mountains and to bare forest, he is a creature that shape the tragic inner world of poet. He is as like as seismograph that record the tremble of being. Finally, in order to fight the darkness of environment, the poet attempt to use the power of fire of volcanoes. The flow of magma become paintings of his dream and the flame of eruption, poetry of cry toward the sky. 'La main au feu' means the will to resist injustice and repression in the world. The tragic reality is replaced by a dream that become second reality out of reach of the force of hostile external circumstances.

Comparison of Hand Grip Strength, Dexterity, and Hand Function According to the Type of Glove

  • Ro, Hyo-Lyun
    • Journal of the Korean Society of Physical Medicine
    • /
    • v.17 no.3
    • /
    • pp.11-21
    • /
    • 2022
  • PURPOSE: This study examined the changes in the handgrip strength, dexterity, and hand function according to the presence or absence of gloves and types of gloves. METHODS: Seventy-six adults in their twenties (male: 24, female: 52, mean age 21.04 years) were the subjects of this study. The handgrip strength, dexterity, and hand function were evaluated with bare hands without gloves, poly gloves, and latex gloves. The handgrip strength was measured using a dynamometer, and three pinch strength tests were performed: tip pinch, lateral pinch, and three-jaw pinch. The hand dexterity was evaluated using the Minnesota manual dexterity test, and the hand function was evaluated using the Jabson-Taylor hand function test. RESULTS: There was no difference in the grip strength depending on whether the gloves were worn. The hand grip, dexterity, and hand function showed significant differences according to the type of glove. Regarding the handgrip, dexterity, and hand function, the latex glove had the best function, and the poly glove had the lowest function. CONCLUSION: There was a difference in dexterity among the hand functions but no difference in grip strength according to the type of glove. The results suggest that the use of latex gloves in daily life be recommended.

Seismic reliability of precast concrete frame with masonry infill wall

  • Mahdi Adibi;Roozbeh Talebkhah;Hamid Farrokh Ghatte
    • Earthquakes and Structures
    • /
    • v.24 no.2
    • /
    • pp.141-153
    • /
    • 2023
  • The presented paper considers infill masonry walls' influence on the seismic reliability of precast concrete frames. The recent Bojnord earthquake on May 13th, 2017 in Iran (MW 5.4) illustrated that the infill masonry walls play a crucial role in the damage extent and life safety issues of inhabitants in the precast concrete buildings. The incremental dynamic analysis (IDA) approach was used to determine the fragility curves of the represented damaged precast frame. Then, by integrating site hazard and structural fragilities, the seismic reliability of the represented precast frame was evaluated in different damage limit states. Additionally, the static pushover analysis (SPA) approach was used to assess the seismic performance assessment of the precast frame. Bare and infilled frames were modeled as 2D frames employing the OpenSees software platform. The multi-strut macro-model method was employed for infill masonry simulation. Also, a relatively efficient and straightforward nonlinear model was used to simulate the nonlinear behavior of the precast beam-column joint. The outputs show that consideration of the masonry infilled wall effect in all spans of the structural frame leads to a decrease in the possibility of exceedance of specified damage limit states in the structures. In addition, variation of hazard curves for buildings with and without consideration of infilled walls leads to a decrease in the reliability of the building's frames with masonry infilled walls. Furthermore, the lack of infill walls in the first story significantly affects the precast concrete frame's seismic reliability and performance.

Development of New Materials of Ginseng by Nanoparticles

  • Yang, Deok Chun;Mathiyalagan, Ramya;Yang, Dong Uk;Perez, Zuly Elizabeth Jimenez;Hurh, Joon;Ahn, Jong Chan
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2018.04a
    • /
    • pp.3-3
    • /
    • 2018
  • For centuries, Panax ginseng Meyer (Korean ginseng) has been widely used as a medicinal herb in Korea, China, and Japan. Ginsenosides are a class of triterpene saponins and recognized as the bioactive components in Korean ginseng. Ginsenosides, which can be classified broadly as protopanaxadiols (PPD), protopanaxatriols (PPT), and oleanolic acids, have been shown to flaunt a vast array of pharmacological activities such as immune-modulatory, anti-inflammatory, anti-tumor, anti-diabetic, and antioxidant effects. In recent years, a number of ginseng and ginsenoside researches have increasingly gained wide attention owing to its unique pharmacological properties. Although good efficacies of ginsenosides have been reported, lack of target specific delivery into tumor sites, low solubility, and low bioavailability due to modifications in gastro-intestinal environments limit their biomedical application in clinical trials. As a result to this major challenge, nanotechnology and drug delivery techniques play a significant role to solve this problematic issue. Thus, we reported the preparation of poly-ethylene glycol (PEG) and glycol chitosan (GC) functionalized to ginsenoside (Compound K and PPD) conjugates via hydrolysable ester bonds with improved aqueous solubility and pH-dependent drug release. In vitro cytotoxicity assays revealed that PEG-CK, and PPD-CK conjugates exhibited lower cytotoxicity compared to bare CK and PPD in HT29 cells. However, GC-CK conjugates exhibited higher and similar cytotoxicity in HT29 and HepG2 cells. Furthermore, GC-CK-treated RAW264.7 cells did not exhibit significant cell death at higher concentration of treatment which supports the biocompatibility of the polymer conjugates. They also inhibited nitric oxide production in lipopolysaccharide (LPS)-induced RAW64.7 cells. In addition to polymer-ginsenoside conjugates, silver (AgNps) and gold nanoparticles (AuNps) have been successfully synthesized by green chemistry using different m. The biosynthesized nanoparticles demonstrated antimicrobial efficacy, anticancer, anti-inflammatory, antioxidant activity, biofilm inhibition, and anticoagulant effect. Special interest on the effective delivery methods of ginsenoside to treatment sites is the focus of metal nanoparticle research.In short, nano-sizing of ginsenoside results in an increased water solubility and bioavailability. The use of nano-sized ginsenoside and P. ginseng mediated metallic nanoparticles is expected to be effective on medical platform against various diseases in the future.

  • PDF

Landscape Structure in the Greenbelt Zone around the Seoul, the Metropolis of Korea

  • Lee, Chang-Seok;Hong, Sun-Kee;Moon, Jeong-Suk;You, Young-Han
    • The Korean Journal of Ecology
    • /
    • v.24 no.6
    • /
    • pp.385-394
    • /
    • 2001
  • An attempt to clarify the landscape structure of urban areas was carried out in the greenbelt around Seoul, Korea's metropolis. By means of aerial photographs and a field survey, a vegetation map including land-use pattern was made. Landscape structure was described by analyzing this vegetation map and the results of phytosociological survey. Landscape element types identified were (1) secondary forest, (2) plantation, (3) cultivated field, (4) urbanized area, (5) graveyard, and (6) bare rock. Vegetation units, resulting from the phytosociological analysis, included Quercus mongolica, Q. variabilis, Q. acutissima, Pinus densiflora, Q. aliena, and Alnus japonica communities. Plantations were composed of Robinia pseudoacacia, Populus tomentiglandulosa, P. rigida, Larix leptolepis, P. koraiensis, and Castanea crenata stands. Patches near to human settlements in the lower zones of the mountains were fragmented and small but they became larger towards the higher mountain zones. On the other hand, the number of patches was fewer and their size was larger in Mt. Cheonggye more distant from the principal residential area, larger in size, and higher in elevation compared with the other 2 mountains, Mt. Daemo and Mt. Acha. Floristic composition of Mongolian oak(Q. mongolica) stand distributing in the upper part of each mountain, in which artificial interference is rare, showed a difference among those study areas different in parent rock and disturbance regime. But that of black locust(R. pseudoacacia) stand located in lowland of mountainous area, in which artificial interference is frequent was similar to each other. As the results of analyses on the frequency distribution of diameter classes of major species, dominant landscape elements, Mongolian oak forest showed different responses depending on artificial interference as continuous maintenance and retrogressive succession in the sites far from and near to the residential areas, respectively. On the other hand, black locust stands showed a probability to be restore to the native oak forest through progressive succession.

  • PDF

A Comparative Study of Korean and Danish Folk Tables (한국과 덴막의 민속 테이블의 비교 연구)

  • 최정신
    • Journal of the Korean housing association
    • /
    • v.6 no.2
    • /
    • pp.181-189
    • /
    • 1995
  • It is thought as more important for us to understand foreign countrie's culture in the modern society. because the world is becoming closer day by day thiough the develepment of communication and mass-media. Cross-cultural study could play a role to give an opportunity for people to understand foreign countrie’s culture easily.In this respect, this study was planned to find out similarity and difference between Danish and Korean folk tables made and used before the 20th century during the 18th-l9th century as a part of the comparative study of folk furniture between the two countries. It would be very interesting if we could find something valuable between Danish and Korean folk furniture. because they are located very far away each other geographically with less cultural communication before.There were more differences than similarity between the folk tables of the two countries and major findings were as followings : Firstly, there were many kinds of space-saving tables in Denmark. whereas only a few kinds of tables which could be removed easily after their usage were found in KoreaSecondly, Banish folk tables were more emphasized on the function rather than decoration. Whereas Korean folk tables were smaller lower and more decorative than Danish ones to fit their life-style of sitting on the floor.Thirdly, many Danish folk tables were made of bare wood. while Korean ones were finished by transparent lacquer or vegetable oil. Stone tops if tables were rare in both countries. Lastly. there were common factors in the design of legs of folk tables in both countries. It was interesting that animal legs such as deg tiger cat. lion, and eagle were used for design motif of the table legs. But trestle leg, cross leg and gate leg were not found in Korean folk tables. As a conclusion, throughout this study, it became obvious that life-style was one of the most important factor influencing on the design of furniture.

  • PDF