• The Korea Journal of Herbology
• /
• v.38 no.2
• /
• pp.9-16
• /
• 2023

Objectives : Many people use natural soap instead of commercially available bar type general soap for skin care. They tend to prefer cp (cold process) type soaps that go through a sufficient maturation process in formulation. The purpose of this study was to investigate the efficacy of PCPS (placenta cp soap). Methods : The researcher selected 36 subjects, 28 as the experimental group and 8 as the control group. I asked participants to wash their face twice a day in the morning and evening, and the period was set for 6 weeks. The researcher had the people who were selected as the control group use a commercially available foam cleanser, meanwhile the experimental group use PCPS. They performed a skin test before the start of the test, and the change status was continuously investigated after 2 weeks, 4 weeks, and 6 weeks after using the soap. Results : In the case of U zone oil and pores, there was a significant decrease and in the case of skin tone, there was a significant increase in the group of using PCPS. In T zone oil change, there was no significant effect in both the experimental group and the control group. Conclusion : In the case of PCPS, it is recommended to use it in the effect of reducing the size of pores and increasing skin tone, but it can reduce u-zone oil content.

• The Korean Journal of Pain
• /
• v.4 no.2
• /
• pp.127-132
• /
• 1991

Recently a non-electronic, disposable and portable infusor(Baxter infusor with patient control module, Baxter health care Co., Deerfield IL 60015 USA: BI $\bar{c}$ PCM) has been developed that will deliver both a continuous drug infusion as well as allow the patient to deliver extra doses of medication on a demand basis under predetermined limitation of analgesics. Patients may also not require as high analgesic dose rate to control pain when the acceptable and tolerable level of pain relief can be maintained by this device. From April l99l, we have used a total l93 units of BI $\bar{c}$ PCM. These units consisting of two components which one made by a balloon reservoir(capacity 65 ml, flow rate 0.5 ml/hr) to store medication and to regulate the pump power(490 torr), and another two PCMs to regulate additional analgesic administration by patients demand at intervals of 1S minutes and 60 minutes. The dose administered to the patient can be varied by changing the concentration of the infusate within the balloon reservoir. These devices were utilized for the pain control of 44 patients. These patients were divided into two groups. Twenty seven cases had cancer pain and 17 cases had non-cancer pain. The Touhy needle(No. l8 G.) tip was inserted into the epidural space and was used to guide the catheter to the spinal nerve level corresponding to the most painful area. The device was connected to the opposite site of the catheter tip and was filled with 60 ml of mixture solution such as 0.5% bupivacaine 15 ml, morphine HCl 10 mg, trazodone 10 ml, Tridol 3 ml and normal saline 31 ml were administed as the initial dose. When the initial dose was less effective, the next dose could be varied by increasing the concentration of bupivacaine, by adding more morphine (5~10 mg), and by reducing the volume of normal saline. Using these modules of drug self administration, we experienced the following: 1) Improvement of patient's self titration of analgesic requirement was provided. 2) The patients anxiety with pain recurrence resulting from delays in administering pain control medication was decreased significantly. 3) The working load accompanying with the single bolus injection as the usual method was reduced remarkably. 4) There was urinary retention in 5 cases and pruritus in 4 eases which developed as side effects but respiratory depression and vomiting was not encountered in a single case.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.391-398
• /
• 2020

If the lost energy produced by a propeller can be partially recovered, the propulsive efficiency can be increased, and the fuel consumption reduced. The devices installed for this purpose are called Energy Saving Devices, of which the Contra-Rotating Propeller system is one of the most effective devices. The first problem to be solved to install the Contra-Rotating Propeller system on a large ship is that the mean pressure generated in the journal bearing needs to meet the design criteria of the classifications. In Korea, however, the practical use is being delayed because it cannot overcome this step. The next step is to lower local pressure to increase the reliability. In this study, to solve the mean pressure problem as the first step of practical use, a product carrier with a short stern shape was selected to reduce the weight of the shafting system, and a suitable shafting-system design plan was proposed. Shaft analysis confirmed that the mean pressure of 0.8 MPa (8 bar), which is a design criterion of the classifications for a journal bearing lining material (white metal), was satisfied. In addition, the necessity of reducing the local pressure was also confirmed.

• Journal of the Korea Concrete Institute
• /
• v.28 no.4
• /
• pp.489-496
• /
• 2016

Recently, a concern about hollow core precast concrete (PC) slab has been increased as a method to improve the construction ability by reducing the self weight of structures during the construction. Hollow core slab which is known as a typical PC slab in domestic construction of PC building has a problem to put shear reinforcements in the web of element during the production of element in the factory. With regard to this point, recently, tripple ribs slab (TRS) which can be said as a new type of half PC slab system was developed. In TRS, it is possible to place shear reinforcements in PC element during the production of the element in the factory. This paper presents the shear test result of TRS which was done by one point loading test under simple support condition. Test parameters are the presence of cast-in-place (CIP) concrete and the contribution of lattice bars. From the test, it was found that the TRS has sufficient shear capacity to resist the design load and its strength can be predicted by the code equations for general beam. It is recommended to ignore the strength of lattice bar in the calculation of shear strength during the construction since its contribution is too low to be considered when CIP is not casted.

• Convergence Security Journal
• /
• v.7 no.3
• /
• pp.87-93
• /
• 2007

We propose a mobile point-of-sale system, which consists of only mobile information terminals and personal computers. The proposed system provides most of functionalities related with resource planning, adminstration and management, provided by medium-scale or large-scale POS systems, with additional functionalities, such as automatic information gathering and management through mobile interconnection, while eliminating the necessity of additional special-purpose devices, such as bar-code systems. The proposed system transmits order information through wireless and wired communication lines, thus allowing real-time sharing of order information among diverse information devices, such as mobile order receiving terminals, main server within stores, monitors and printers located in production lines. Also, the system is able to transfer such detail information produced within stores in real-time to the enterprise-level accounting, sales, logistics, personnel management system, which facilitate enterprise-wide management and administrative decision-making. No additional programs are required for mobile terminals. Order information received by such terminals are entered into databases through web server of main server and that information is again transferred to main server and production line printers. The proposed system can handle all the point-of-sale information and can provide almost of the POS functionalities by simply utilizing wireless internet, personal computers, and mobile terminals without installing specific-purpose peripheral devices. The proposed system can be widely applied to the small-scale stores and will contribute in reducing construction and maintenance cost required for point-of-sale management.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.177-181
• /
• 2016

This cross-sectional descriptive and qualitative study was aimed to study the people participation and their approaches toward the human carcinogenic liver fluke, Opisthorchis viverrini, prevention and control in Ban Chaun sub-district administrative organization (BCSAO) and Bamnet Narong sub-district municipality (BNSM), Bamnet Narong district, Chaiyaphum Province, Thailand between June 2013 and February 2014. Participants were purposive selected, included chiefs of sub-district administrative organizations, sub-district municipalities, sub-district health promotion hospitals (SHPHs), heads of village, and a further sample was selected with a multi-stage random sampling for public health volunteers, and villagers. The pre-designed questionnaire contained items for individualized status and the participatory steps of sharing ideas, decision-making, and planning, procession, evaluation, and mutual benefit, for the project O. viverrini prevention and control (POPC). In-depth interviews were used for collection of need approaches to POPC. With 375 participants who completed the questionnaire, it was found that people had a high level regarding to participate in the POPC, particularly in the process stage ($\bar{X}=3.78$, S.D. = 0.56), but the lowest level was found in sharing ideas, decision making, and planning step ($\bar{X}=3.65$, S.D. = 0.63). By comparison, participant status and organization did not significantly differ with people participation. In each step, Ban Chaun sub-district had a high level of participation in the step of sharing ideas, decision making, and planning toward POPC, more than Bamnet Narong sub-district municipality (t=2.20, p=0.028). Approaches for POPC in Ban Chaun sub-district and Bamnet Narong sub-district municipality included requirements for budget support, annual campaigns for liver fluke prevention and control, campaign promotion, risk group observation, home visiting, community rules regarding reducing raw fish consumption in their communities, and a professional public health officer for working in their communities, BCSAO, BNSM, and SHPH, for O. viverrini prevention and control. This study indicates that people realize that eradication of the liver fluke needs a continuous people participation for O. viverrini prevention and control in their communities.

• Journal of Plant Biotechnology
• /
• v.38 no.2
• /
• pp.105-116
• /
• 2011

Transgenic zoysiagrass (Zoysia japonica Steud.) expressing the bar gene inserted in the plant genome has been generated previously through Agrobacterium tumefaciens-mediated transformation. The GM zoysiagrass (event: JG21) permits efficient management of weed control of widely cultivated zoysiagrass fields, reducing the frequency and cost of using various herbicides for weed control. Now we have carried out the environmental risk assessment of JG21 prior to applying to the governmental regulatory agency for the commercial release of the GM turf grass outside of test plots. The morphological phenotypes, molecular analysis, weediness and gene flow from each test plot of JG21 and wild-type zoysiagrasses have been evaluated by selectively analyzing environmental effects. There were no marked differences in morphological phenotypes between JG21 and wild-type grasses. The JG21 retained its stable integration in the host plant in T1 generation, exhibiting a 3:1 segregation ratio according to the Mendelian genetics. We confirmed the copy number (1) of JG21 by using Southern blot analysis, as the transgenic plants were tolerant to ammonium glufosinate throughout the culture period. From cross-fertilization and gene flow studies, we found a 9% cross-pollination rate at the center of JG21 field and 0% at distances over 3 m from the field. The JG21 and wild-type zoysiagrass plants are not considered "weed" because zoysiagrasses generally are not dominant and do not spread into weedy areas easily. We assessed the horizontal gene transfer (HGT) of the transgene DNA to soil microorganisms from JG21 and wild-type plants. The bar gene was not detected from the total genomic DNA extracted from each rhizosphere soil of GM and non-GM Zoysia grass fields. Through the monitoring of JG21 transgene's unintentional release into the environment, we found no evidence for either pollen mediated gene flow of zoysiagrass or seed dispersal from the test field within a 3 km radius of the natural habitat.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.333-344
• /
• 2011

The recent expansion in the number of housing construction projects has been accompanied by substantial improvements in construction quality, which can be attributed to the development of new construction technologies and materials. In apartment complex construction projects, numerous mechanization technologies have been adopted as part of the floor plastering process to counter increasing difficulties in securing labor and the pressing need to reduce lead time, but these have also triggered setbacks such as additional costs or loss of time to fix cracks in or loosening of floor. Cracks developing in the floor of an apartment housing unit, in terms of materials in use, are the products of a complex combination of material makeup, construction workmanship, concrete curing and the protection method. Controlling such elements from the perspective of materials in use may ensure partial success in reducing cracks, but fall short of eliminating them completely. Any attempt to prevent cracks from developing in the first place requires systematic analysis as to their potential causes and viable solutions to reduce them. On this backdrop, this paper aims to provide an analysis of potential causes of cracks found in floor plastering, and consider the mechanism of a crack stop-bar as a fundamental safeguard against them.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.252-260
• /
• 2009

Rice is the most important cereal crop not only in supplying the basic staple food for more than half of the world's population but also as a model plant for functional genomic studies of monocotyledons. Although rice transformation method using A. tumefaciens has already been widely used to generate transgenic plants, the transformation rate is still low in most Korean elite cultivars. We made several modifications of the standard protocol especially in the co-cultivation step to improve the efficiency of the rice transformation. The co-culture medium was modified by the addition of three antioxidant compounds (10.5 mg/L L-cysteine, 1 mM sodium thiosulfate, 1 mM dithiothreitol) and of Agrobacterium growth-inhibiting agent (5 mg/L silver nitrate). Co-cultivation temperature ($23.5^{\circ}C$ for 1 day, $26.5^{\circ}C$ for 6 days) and duration (7 days) were also changed. The plasmid of pMJC-GB-GUS carrying the GUS reporter gene and the bar gene as the selectable marker was used to evaluate the efficiency of the transformation. After co-cultivation, a high level of GUS gene expression was observed in calli treated with the modified method. It is likely that those newly added compounds helped to minimize the damage due to oxidative bursts during plant cell-Agrobacterium interaction and to prevent necrosis of rice cells. And the transformation rate under the modified method was also remarkably increased approximately 8-fold in Heungnambyeo and 2-fold in Ilmibyeo as compared to the corresponding standard method. Furthermore, we could produce the transgenic plants stably from Ilpumbyeo which is a high-quality rice but its transformation rate is extremely low. Transformation and the copy number of transgenes were confirmed by PCR, bar strip and Southern blot analysis. The improved method would attribute reducing the effort and the time required to produce a large number of transgenic rice plants.

• Journal of Korea Water Resources Association
• /
• v.51 no.12
• /
• pp.1273-1284
• /
• 2018

The flow and bed change were analyzed using the CCHE2D model, which is a two-dimensional numerical model, at a confluence of the Namhan River and Seom River where deposition occurs predominantly after the "Four Major Rivers Restoration Project." The characteristic of the junction is that the tributary of Seom River joined into the curved channel of the main reach of the Namhan River. The CCHE2D model analyzes the non-equilibrium sediment transport, and the adaptation lengths for the bed load and suspended load are important variables in the model. At the target area, the adaptation length for the bed load showed the greatest influence on the river bed change. Numerical simulation results demonstrated that the discharge ratio ($Q_r$) change affected the flow and bed change in the Namhan River and Seom river junction. When $Q_r{\leq}2.5$, the flow velocity of the main reach increased before confluence, thereby reducing the flow separation zone and decreasing the deposition inside the junction. When $Q_r$>2.5, there was a high possibility that deposition would be increased, thereby forming sand bar. Numerical simulation showed that a fixed sand bar has been formed at the junction due to the change of discharge ratio, which occurred in 2013.