• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1805-1811
• /
• 2005

We analyzed of the receiver which received OOK and the FSK transmission signal that were a general digital transmission technique in a WDM system. We expressed various error probability with the m which was bandwidth and a bit numerical function and carried out performance evaluation of a receiver in a performance evaluation way. When error probability was $10^{-4}$ which is m=10, as for the receive sensitivity of OOK, the $1.7{\times}10^2$, FSK got $2.2{\times}10^2$ through simulation. And the receive sensitivity of OOK and FSK was able to get each $2.15{\times}10^2$ and $3.07{\times}10^2$ when it was error probability of $10^{-9}$ which is m = 25. Transmission of 23Gb/S showed that it was possible when we does the $10^{-9}$ that was basis error probability of a light communication system with a basis through this, and a coding profit was with for and transmission capacity of 75Gb/s confirmed that it was possible if a code rate was with 0.8.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1030-1033
• /
• 2005

Today's most equipments that contain embedded system only support simple menus and background graphics. However, as the embedded system is applied for much more various fields and the user's needs for graphical interface become higher, the support for multimedia and moving pictures became an important criterion to evaluate the performance of a equipment. Because the present embedded system uses software to construct display environment, it is difficult to meet the bandwidth for multimedia contents and moving pictures. Using software for graphic also lowers the performance of the main function by overloading the processor. In this paper, we present an OLED/TFT-LCD controller suitable for embedded systems. The architecture we propose is described in HDL and the performance is evaluated in comparison with the existing embedded systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1038-1044
• /
• 2011

In this paper, the multichannel intermediate frequency transceiver for broadband multimedia system is designed and the experimental results are analyzed. Basic elements of the transceiver such as frequency synthesizer, amplifier, mixer, automatic gain control amplifier are introduced. The analysis technique described here applies not only to amplifier but also to any other nonlinear components such as mixers and frequency doubler. Through the investigation of the power spectrum density of the transmitted signal, the phase noise of the local oscillator is evaluated below 70 dBc/kHz. The frequency characteristics of the modulated signal is flat within the system bandwidth. Also the effects of adjacent channel interference and supurious emission are analyzed. And the function of automatic gain control amplifier is well operated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5588-5593
• /
• 2011

In this paper, measure of change the speech analysis parameter by stimulating ears blood points corresponding to cardiac. To do this, we collected voice of before and after a stimulation corresponding points to ears to select normal heart having 10 subjects. We analyzed changes before and after corresponding points to ear in cardiac to apply Jitter, the second zFormant Frequency Bandwidths related to heart of elements of voice analysis. As a result of us experiment, we were able to analyze correlation of voice with cardiac according to corresponding points to ears decreased values of Jitter, the Second Formant Frequency Bandwidths of 90% of subjects. Finally, the effectiveness of proposed method is demonstrated by several experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.802-812
• /
• 2000

Multihop lightwave networks are the optical-fiber based local communication systems that employ WDM(Wavelength Division Multiplexing) technology to fully use the enormous fiber bandwidth without requiring any tunable tranceives. In this paper, we introduce a novel ShuffleNet topology, asymmetric bilayered ShuffleNet(ABS) topology as a multihop WDM network technique. For 1Gb/s transmission system, we compared ABS topology with previously reported ones in terms of common network parameters such as average number of hops, throughput, time delay, and network power function. Through the analysis, the performance of ABS topology was proven to be superior to the existing ones. To decrease the amount of hardware required for implementing ABS system, we also proposed a new WDM channel sharing scheme. For (2, 3) ShuffleNet topology system, the number of wavelengths needed in the system can be reduced dramatically from 96 to 4 by using new scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3B
• /
• pp.183-190
• /
• 2003

The explosion of the Internet has brought an acute need for efficient operation, which becomes to develop several technologies based on optical networks. By matching merging technology using wavelength multiplexing, an efficient administration with limited wavelength can provide scalability of network. The merging in optical layer has limitation of devices since the merging can not be performed in this layer. Hence the merging must be implemented in electronic layer. When the merging is implemented, the delay time would be increased in OXC (Optical Cross Connection), but the improvement of throughput rate will be expected in the process of explosive traffic due to reduction of optical channel supporting large bandwidth. In this thesis, we proposed an OXC of dual module having a merging function. We considered the optimum merging point with the largest in system performance and confirmed results using the simulation.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.88-93
• /
• 2013

The wideband chirp signal generator to enhance the resolution of synthetic aperture radar of obtaining the earth observation image is needed. This paper deals with designing, manufacturing and testing the wideband digital chirp signal generator having high resolution for LEO earth observation satellite. The wideband digital chirp signal generator is implemented with the memory-map based structure which is mostly applied in the satellite, and consists of the digital module to generate the digital chirp signal and the RF module to perform the quadrature modulation. The I/Q signals stored in the memory of the digital module are D/A converted and delivered to be quadrature modulated with the reference signal of 1275 MHz in the RF module. Furthermore, the test bench and GUI to validate the signal generator function are also developed. It is found that the requirement of 144 MHz bandwidth for the digital chirp signal generator is well met. Finally it is noteworthy that the distortion occurred in the chirp signal generator was compensated by the pre-distortion compensation.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.3 no.2
• /
• pp.51-60
• /
• 2004

In this paper, 8-channel multiplexer with 100GHz channel spacing is fabricated. The 8-channel multiplexer is fabricated by connecting three cascaded Mach Zehnder Interferometer (MZI) of optical fiber type, and each interferometer has the wavelength interval of 100GHz, 200GHz and 400GHz, respectively. furthermore, to acquire uniform insertion loss, it is fabricated by using Wavelength Flatten Coupler (WFC) in which the variation of insertion loss is low. Especially, the variation of wavelength interval in the output is explicitly simulated as a function of optical path difference, and the wavelength coupling process along with cascaded connection is discussed. $CO_2$ laser to adjust precisely the wavelength. In summary, The prototype composed by eight cascaded MZI has an insertion loss of 2.1dB, the bandwidth of 0.8nm at 5.5dB point, and channel crosstalk of 25dB Furthermore, the loss dependent on polarization is measured as 0.06dB.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.761-764
• /
• 2010

Interest in vehicle infotainment system, that provides both entertainment of driving and information for safe and convenient driving, has been recently increased. MOST is defined as the network transmitting high-bandwidth infortainment data to vehicle, and it has been standardized as MOST150. In this research, dynamic behavior method that deals with roles and functions of each devices connected to MOST150 Network, and Power Management Method was studied. MOST Network consists of a master device, including function block 'NetworkMaster', and all other devices called slave devices. The purpose of this study is to apply the analysis of the methods of operating and power management based on condition of master device and slave devices on MOST150 network to the future development of MOST150 devices.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.179-186
• /
• 2011

Wireless Mesh Network technology refers to the technology which establishes wireless network whose transmission speed is similar to that of the wire system, and provides more enhanced flexibility in the building of network, compared to the existing wired network. In addition, it has the feature of less mobility and less restriction from the energy effect. However, there follow many considerations such as system overhead in the case of setting or the selection of multi-path. Accordingly, the focus is on the design and optimization of network which can reflect this network feature and the technology to establish path. This paper suggests the methods on the programming of path in Wireless Mesh Network routing by applying the evaluation value of node service, making use of the loss rate of data, the hop count of bandwidth and link and the traffic status of node, considering the performance of link and load in the fitness evaluation function, in order to respond to the programming of multi-path effectively.