• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.384-394
• /
• 1996

The propagation properties of square and Gaussian pulse signals on the microstrip line are investigated by using proper conventional models to meet the frequency range of a pulse, accuracy, and geometrical requirements of the microstrip line. Numerical integration technique which has its accuracy and is easily simulated, is used to obtain the time domain response of pulse signals. The dispersion of pulse signals is analyzed regarding to the relative permittivity $\varepsilon_r$, substrate height h, strip width w of the microstrip line and pulse width $\tau$ of signal pulse. The simulation results show that small relative permittivity and small rationale of w/h are advantageous for the dispersion of the pulse signals, and that pulse signals with small bandwidth cause smaller dispersion. The results of this paper are compatible to the trade-off determination of relative permittivity, substrate height, strip width and pulse width of signal pulse when a design of MIC and MMIC is necessary.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.3
• /
• pp.1-10
• /
• 2004

Video-On-Demand servers use compression techniques to reduce the storage and bandwidth requirements. The compression techniques make the bit rates of compressed video data significantly variable from frame to frame. Consequently, Video-On-Demand servers with a constant bit rate retrieval can not maximize the utilization of resources. It is possible that when variable bit rate video data is stored, accurate description of the bit rate changes could be computed a priori. In this paper, I propose a buffer management scheme called MAX for Video-On-Demand server using variable bit rate continuous media. By caching and prefetching the data, MAX buffer management scheme reduces the variation of the compressed data and increases the number of clients simultaneously served and maximizes the utilization of system resources. Results of trace-driven simulations show the effectiveness of the scheme.

• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.187-193
• /
• 2004

Wireless networks play a very important role in communications today. For example, wireless networks today provide from the basic services like e-mail and FTP to the multimedia applications like Web service. It is obvious that QoS requirements to these diverse applications over wireless networks will continue as in wired networks. Much research has been done to develop QoS supporting algorithms on Internet. But due to the limited bandwidth and varying channel states of the wireless networks, it is difficult to support differentiated service over wireless networks. In this paper we propose the modified wireless token ring protocol supporting QoS to the real-time traffic service node over Internet environments in which non-real-time and real-time traffic service nodes coexist. In the proposed algorithm, the real-time traffic service node gets the priority to take token over the non-real-time traffic service node. So the proposed algorithm support quick transmission of the real-time traffic service node. And this advantage can be obtained with minor modification of the legacy wireless token ing protocol to support QoS. We also consider the lost token recovery mechanism.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.204-211
• /
• 2011

Embedded systems require intensively complex and high power dissipating modules that have the capability of real-time high performance data processing, wide bandwidth communication, and low power consumption. However, the current battery technology has not been developed as much as meeting the requirements of portable embedded systems for long system lifetime. In this paper, new approach that operates with low energy consumption is proposed to overcome the situation while guaranteeing detection accuracy. The designed method associates a variety of detection algorithms hierarchically to detect events happening around the system. The Change for energy consumption characteristics is shown with change for probabilistic characteristics and those relationships are analytically explained from experiments. Furthermore, several techniques to consume low energy and achieve high detection accuracy are described, depending on the event static or dynamic characteristics.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.255-266
• /
• 2007

RSVP (Resource reSerVation Protocol) is the Internet standard protocol for supporting QoS (Quality of Service) requirements by reserving network resources between the sender and the receiver. Several problems, such as common path identification and resource pre-reservation, should be solved to apply RSVP in wireless mobile environments. To resolve these problems, this paper proposes DBRA (Dynamic Branch Router Approach) based on two designated entities, candidate access routers and a branch router. While several RSVP sessions between a branch router and candidate routers are managed, DBRA makes use of only one RSVP session between the sender and a branch router. Based on a network simulation, the proposed scheme has been compared with MRSVP (Mobile RSVP) and HMRSVP (Hierarchical MRSVP) in terms of the average packet transmission rate, bandwidth utilization and RSVP session failure rate.

• Journal of electromagnetic engineering and science
• /
• v.18 no.3
• /
• pp.188-198
• /
• 2018

In this study, we propose an approach for the design and satisfy the requirements of the fabrication of a small, lightweight, reliable, and stable ultra-wideband receiver for millimeter-wave bands and the contents of the approach. In this paper, we designed and fabricated a stable receiver with having low noise figure, flat gain characteristics, and low noise characteristics, suitable for millimeter-wave bands. The method uses the chip-and-wire process for the assembly and operation of a bare MMIC device. In order to compensate for the mismatch between the components used in the receiver, an amplifier, mixer, multiplier, and filter suitable for wideband frequency characteristics were designed and applied to the receiver. To improve the low frequency and narrow bandwidth of existing products, mathematical modeling of the wideband receiver was performed and based on this spurious signals generated from complex local oscillation signals were designed so as not to affect the RF path. In the ultra-wideband receiver, the gain was between 22.2 dB and 28.5 dB at Band A (input frequency, 18-26 GHz) with a flatness of approximately 6.3 dB, while the gain was between 21.9 dB and 26.0 dB at Band B (input frequency, 26-40 GHz) with a flatness of approximately 4.1 dB. The measured value of the noise figure at Band A was 7.92 dB and the maximum value of noise figure, measured at Band B was 8.58 dB. The leakage signal of the local oscillator (LO) was -97.3 dBm and -90 dBm at the 33 GHz and 44 GHz path, respectively. Measurement was made at the 15 GHz IF output of band A (LO, 33 GHz) and the suppression characteristic obtained through the measurement was approximately 30 dBc.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.17-23
• /
• 2007

This paper, describes the VDR physical layer design in VDL Mode-2 in order to meet the requirements of International standards. VDR's frequency band is 117.975~137MHz, and CSMA(Carrier Sense Multiple Access), D8PSK(Differential Eight Phase Shift Keyed), 25KHz's channel bandwidth use. The analysis of the isolated channel from near channels, sensitivity of the receiver, dynamic range of the receiver, linear of the transmitter and energy of spurious for linear and non-linear simulation as a requirement condition of performance of VDR and teaches the course of design. The transmitting power level should be lower than 5dB from Po1dB point and the selected IF frequency is 45MHz to suppress the spurious signals. The receiver designed has 4.5dB of Noise figure, 27.52dB of Es/No, Mixer isolation up to 30dB, IIP3 power of LNA up to +10dBm to minimize the intermodulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.895-901
• /
• 2016

The next generation wireless and satellite communications require high transmission efficiency and high reliability to provide various services with subscribers. To satisfied these requirements, incorporated MIMO (Multiple Input Multiple Output) system with FTN (Faster Than Nyquist) techniques based on layered space time coded method are considered in the paper. To improve performance, STTC (Space Time Trellis Code) was employed as an inner code. As the same as SISO (Single Input Single Output) system, the outer codes are turbo codes. In receiver side, BCJR algorithm is used for STTC decoding in order to eliminate interferences induced by FTN transmission. They can yield significantly increased the data rates and improved link reliability without additional bandwidth. Therefore, we proposed a new decoding model for MIMO FTN model and confirmed that performance was improved compared to conventional SISO model according to amount of interference for FTN.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.12
• /
• pp.968-972
• /
• 2009

The multi-core processors are being widely exploited by many high-end systems. With significant advances in processor architecture, the network band-width required on the high-end systems is increasing drastically. It is therefore highly desirable to manage multiple cores efficiently to achieve high network band-width with minimum resource requirements. Modern operating systems, however, still have significant design and optimization space to leverage the network performance over multi-core systems. In this paper, we suggest a novel networking process scheduling scheme, which decides the best processor affinity of networking processes based on the processor cache layout, communication intensiveness, and processor loads. The experimental results show that the scheduling scheme implemented in the Linux kernel can improve the network bandwidth and the effectiveness of processor utilization by 20% and 59%, respectively.

• Ocean Systems Engineering
• /
• v.7 no.3
• /
• pp.179-193
• /
• 2017

Dynamic response analysis of offshore triceratops with stiffened buoyant legs under impact and non-impact waves is presented. Triceratops is relatively new-generation complaint platform being explored in the recent past for its suitability in ultra-deep waters. Buoyant legs support the deck through ball joints, which partially isolate the deck by not transferring rotation from legs to the deck. Buoyant legs are interconnected using equally spaced stiffeners, inducing more integral action in dispersing the encountered wave loads. Two typical nonlinear waves under very high sea state are used to simulate impact and non-impact waves. Parameters of JONSWAP spectrum are chosen to produce waves with high vertical and horizontal asymmetries. Impact waves are simulated by steep, front asymmetric waves while non-impact waves are simulated using Stokes nonlinear irregular waves. Based on the numerical analyses presented, it is seen that the platform experiences both steady state (springing) and transient response (ringing) of high amplitudes. Response of the deck shows significant reduction in rotational degrees-of-freedom due to isolation offered by ball joints. Weak-asymmetric waves, resulting in non-impact waves cause steady state response. Beat phenomenon is noticed in almost all degrees-of-freedom but values in sway, roll and yaw are considerably low as angle of incidence is zero degrees. Impact waves cause response in higher frequencies; bursting nature of pitch response is a clear manifestation of the effect of impact waves on buoyant legs. Non-impact waves cause response similar to that of a beating phenomenon in all active degrees-of-freedom, which otherwise would not be present under normal loading. Power spectral density plots show energy content of response for a wide bandwidth of frequencies, indicating an alarming behaviour apart from being highly nonlinear. Heave, being one of the stiff degrees-of-freedom is triggered under non-impact waves, which resulted in tether tension variation under non-impact waves as well. Reduced deck response aids functional requirements of triceratops even under impact and non-impact waves. Stiffened group of buoyant legs enable a monolithic behaviour, enhancing stiffness in vertical plane.